Mike Page, Editor, writes:
We see from your search that you're looking for information on the term "ASME (American Society of Manufacturing Engineers)",
and we have a large number of manufacturers' news releases and technical articles here on Manufacturingtalk which will be of interest.
Let me be your guide.
Start with
the news release Corrosion-proof cladding for offshore pipeline from
Arc Energy Resources, which we summarised at the time by saying "Arc Energy Resources has added a corrosion-proof cladding, using 16 plates of 3mm Alloy 59, to an 8.65m long, 16in diameter Superduplex riser for a pipeline company".
A couple of weeks before,
we featured the news release Diagnosis and maintenance of machine tools from
Rockwell Automation: "Rockwell Automation has introduced the QC10 ballbar which gives maintenance technicians a tool for assessing the dynamic motion and positioning precision of machine tools and production machinery".
In May 2007, we covered the news from FARO Technologies
concerning its Laser tracker
- take a look at Company sells more laser trackers any other
which says: "Faro Technologies, provider of portable CAM2 solutions, shipped 50% more laser trackers than any other company in a three year period".
Take a look also at the news release from Faro UK, Laser trackers have expanded temperature range,
as well as High impact spray parts washer from Suncombe,
and Global simulation view at NAFEMS conference from NAFEMS.
See also:
ASME supports NAFEMS World Congress 2007
(April 2007)
The American Society of Mechanical Engineers will sponsor the International Association for the Engineering Analysis Community's World Congress 2007 in Candada
Accurate spray targetting cleans parts efficiently
(April 2007)
A high quality, parts washer, for use in the pharmaceutical and medical fields uses an innovative spray technique to offer the perfect cleaning, employing high impact accurate spray targeting
Engineering analysis community event
(March 2007)
Congress will bring together world leading industrial practitioners, consultancies, academic researchers and software developers with a common interest in engineering analysis
Bimetal temperature sensor provides local readout
(March 2007)
The Bimetal Dual-Mode Remote Thermometer from Moore industries simultaneously provides a mV or ohm signal proportional to temperature for input to a transmitter, Remote Terminal Unit, controller
Improved Productivity and CAD Integration
(February 2007)
The XM edition of Bentley AutoPIPE provides improved productivity and increased interoperability with other computer-aided design (CAD) products
ASTM names vice chairman for board
(December 2006)
Having been active in several ASTM Committees, Paul K Whitcraft has been named vice chairman, ASTM International board of directors
In-service weld integrity assessment
(October 2006)
GE Inspection Technologies has announced the launch of Mapstar UT, GE's alternative to radiography for the inspection of welds in pressure vessels and other critical structures
Accredited laser tracker manufacture conforms
(September 2006)
Faro Technologies,has officially established itself as the worldwide market leader in laser tracker sales
The Benefits of EDM/PDM explained
(September 2006)
Synergis Software Experts to Speak on Data Management at Leading CAD Industry Conferences
Flowserve Pumps wins Fluid Machinery Design Award
(August 2006)
Bruno Schiavello, director of fluid dynamics in the technology department of Flowserve Pumps, has won the 2006 Fluid Machinery Design Award from the American Society of Mechanical Engineers (ASME)
Pump technology expert memorialized
(August 2006)
Flowserve Corp announces the establishment of an award from the American Society of Mechanical Engineers, memorializing Flowserve employee and pump technology expert Dr Sankaraiyer Gopalakrishnan
Precise laser trackers resist harsh environments
(July 2006)
Laser tracker devices offer 0.015mm and 0.005mm distance accuracies and also feature an expanded temperature range for greater adaptability to harsh manufacturing environments
Latest 3D CAD has hundreds of enhancements
(June 2006)
Latest 3D CAD has hundreds of enhancements and delivers a cost effective design solution focused on innovation and collaboration for the entire global manufacturing value chain
Sensors, probes speed mould machining
(April 2006)
Advances in machine accuracy, on-machine touch probing technology, and non-contact tool setting provide powerful tools for automating and speeding mold machining, writes Barry Rogers
Twin-wire weld overlay cladding system developed
(March 2006)
Subcontract weld cladding company's research and development team has developed a twin-wire system for weld overlay cladding - doubling deposition rate and reducing the HAZ
Gas-shielded, flux-cored wires are very stable
(March 2006)
Premium gas-shielded, flux-cored wire line expands with two new wires for fracture-critical heavy fabrication - wires are made to tight manufacturing tolerances, deliver high arc stability
'Passport to Steel' is now on-line
(February 2006)
Latest data on more than 50,000 steels - with the ability to find comparable worldwide steel standards from organisations around the globe - is in 'Passport to Steel', which is now on-line
International Steels Group Honors metallurgist
(January 2006)
In recognition of exemplary contributions to ASTM's Founding Committee in the development of voluntary consensus standards consultant Edward Nisbett has received the 2005 Founding Committee Award
CMM oftware modules expand EMS further
(November 2005)
Expanding on the concept of Enterprise Metrology Solutions, software modules for CMMs expedite programming and extend capabilities to other types of measurement equipment
Pumps and tanks available as individual components
(October 2005)
Compressor manufacturer Jun-Air is making its range of compressor pumps and receiver tanks available as individual components for OEMs to build in to their own products
UGS Launches NX 4
(September 2005)
Hundreds of customer-driven enhancements build on NX's leadership in digital simulation and knowledge-based engineering
UGS Transforms CAE Performance
(September 2005)
NX Nastran extends UGS performance lead in digital simulation and analysis
ASME to get closer to European engineers
(September 2005)
To broaden its global outreach to engineers in Europe and surrounding markets, the American Society of Mechanical Engineers has opened an office in Brussels, Belgium
Help offered over ASME/PED confusion
(August 2005)
There is still considerable confusion about the similarities and differences between The European Pressure Equipment Directive and The American ASME Codes
Ballbar backs up Six Sigma and Lean needs
(August 2005)
Ballbar used for both diagnosis and predictive maintenance to keep machine tools running and producing to specification and provides vital benefits to Six Sigma quality and Lean efficiencies
Preprinted markers provide pipe flow details
(July 2005)
Preprinted pipe markers for identifying pipes and components in industry identify the contents of the pipes, the risk of hazard, and the direction of flow
Free guides to ASME, ANSI and IIAR pipe marking
(July 2005)
Graphic Products is now carrying Brady preprinted pipe markers for identifying pipes and components; free guides to pipe marking are also available
Verify a machine tool's performance first
(July 2005)
Determining a machine tool's capabilities before machining, and subsequent post-process part inspection, can greatly reduce the potential for scrap, says Ralph Fergusson-Kelly
High quality process pipework offered
(July 2005)
Process pipework for pharmaceutical and bio-technology usage has now extended to other production where cleanliness, hygiene and quality assurance show positive commercial benefits
Machine tools often checked to hold tolerances
(June 2005)
Medical implant maker determines machine tool capabilities through simple and accurate ballbar diagnosis for consistently producing tight-tolerance work in widely variable production
Icona Solutions announces aesthetica version 2.0
(June 2005)
Latest version of company's unique automotive manufacturing variation simulation and visualisation software introduces major enhancements
Compact rupture disk
(June 2005)
Oklahoma Safety Equipment (Oseco), a leading manufacturer of rupture disks, has launched the latest version of its product catalogue on compact disc
CD-adapco to present enterprise-wide Solution
(June 2005)
CD-adapco to present 'enterprise-wide Solution' on the 50th anniversary of the ASME Turbo Expo
Ultrasonic assessment flaw detection
(February 2005)
The new IAS 50 from GE Inspection Technologies is a field-deployable, ultrasonic integrity assessment system, designed for corrosion mapping and general flaw detection