Mike Page, Editor, writes:
We see from your search that you're looking for information on the term "Cleaning Solution",
and we have a large number of manufacturers' news releases and technical articles here on Manufacturingtalk which will be of interest.
Let me be your guide.
Start with
the news release Ultrasonics cleans up wood saw blades from
Guyson International, which we summarised at the time by saying "Industrial ultrasonic tanks provide fast and effective cleaning for all kinds of wood saw blades, hoggers, profile cutting tools, routers, and drills".
A few weeks before,
we featured the news release Machining centres - keep the tool shanks clean from
Roschiwal + Partner Ingenieur: "Inaccuracies and machine tool down time can result from dirty tooling shanks, which is why a Germany company has developed a tool shank or taper cleaning system".
In June 2007, we covered the news from Scott Health and Safety
concerning its Profile2 half mask Agri-Pak
- take a look at New masks against respiratory hazards
which says: "Scott Profile2 Agri-Pak provides safety focus".
Take a look also at the news release from Guyson International, Strategy for replacing Trichloroethylene,
as well as Respiratory protection for farm workers. from Scott Health and Safety,
and Conveyorised tunnel washes and degreases tubes from Guyson International.
See also:
Parts washing systems - pump efficiency raised
(November 2006)
Parts washing machine builder's R and D programme has recently increased the operating efficiency of its pumps to boost the performance of each pump delivery system
Automatic handling for cleaning systems
(November 2006)
Guyson would like to introduce the latest automated work transporter for its Kerry Ultrasonics Microsolve solvent cleaning systems
Food conveyor belt is easy to clean
(August 2006)
An easy to clean conveyor belt is designed for use in difficult food environments and especially those prone to clogging, and the new lightweight belt should provide significant cost savings
Cleaning system removes machine contaminants
(April 2006)
Cleaning system is designed to remove contaminants between and after manufacturing processes, and is ideal for small volume production environments as well as larger companies
'UK's first H2O ice cleaning system
(April 2006)
CIProcess announces the launch of the UK's first Cleaning System powered by H2O Ice
Protection against bird flu
(March 2006)
RPE range protects field-workers, medical staff and carers
Cleaning system cleans micro tooling
(January 2006)
In the manufacture of micro-tooling for non-silicon micro components, a cleaning system has been developed, which is capable of removing very fine particles without damaging surface finish
Robotic cleaning system order placed
(December 2005)
Following extensive trials, the British Nuclear Group has chosen the new robotic cleaning system from KMT Cutting Systems AB, placing an order worth approximately GBP 300,000
Water recovery/recycle system cuts costs
(October 2005)
In a typical 500 litre aqueous washing machine a water recovery and recyling system produces savings of some GBP 7500/year so the system can pay for itself in around 12 months
Medical parts maker replaces 'trich' effectively
(August 2005)
A hot power washer, using safe aqueous cleaning technology was selected as the ideal cost effective answer to replace trichloroethylene solvents for cleaning machined components
Cleaning system boosts cost efficiency
(July 2005)
Cleanliness, production efficiency and environmental protection are all enhanced by a component cleaning system that handles parts from 60 machines, 30 of which are high volume
Ultrasonics clean up effectively for plating
(May 2005)
Ultrasonic clean and rinse systems effectively remove polishing compounds before electro-plating from items as diverse as door furniture: handles to motorcycle components
Cleaner effectively lifts oil from iron and steel
(May 2005)
Split cleaner for heavy-duty cleaning applications effectively lifts oil from iron and steel parts, then floats the oil residue to the liquid surface for removal from the tank
Ultrasonic clean and rinse tanks are reliable
(March 2005)
Ultrasonic clean and rinse tanks have ultrasonic transducers that provide high performance and reliability together with uniform distribution of the ultrasonic energy
Ultrasonic cleaning baths can be programmed
(January 2005)
Ultrasonic cleaning baths can be programmed to maximise the quality and repeatability of results by pre-setting exact cleaning times and temperatures, ensuring consistent cleanliness
Novel cleaning system launched in USA and Canada
(January 2005)
Enduropower, the innovative cleaning system for the food, beverage and dairy industries, is now available in the USA and Canada in addition to nine European countries
Tunnel washer degreases and protects
(November 2004)
A versatile four-stage conveyorised Marr-Line tunnel washer is degreasing and protecting a range of metallic - brass, aluminium and iron - automotive starter motor parts
Aqueous parts washer extends solution life
(June 2004)
A fully integrated, point of use aqueous parts washer recycling system is designed to significantly extend cleaning solution life and greatly minimize machine maintenance
Rotary basket units wash gears cost effectively
(February 2004)
One of the largest names in Aerospace and one of its main subcontractors, have over several months installed a total of eleven rotary basket washers for thoroughly degreasing flap actuation gears
Compact system cleans small batch work
(September 2003)
A breakthrough in achieving low-cost cleaning of small batches of metal, plastic or glass components using non-halogenated solvents has been achieved by a compact cleaning system
Two stage conveyorised machine cleans heavy rotors
(September 2003)
Two stage conveyorised aqueous wash and dry machine is degreasing heavy steel generator rotors in a continuous and efficient manner at a rate of 90 parts per hour
Single-stage aqueous wash cleans up driveline part
(July 2003)
Historically roll-formed driveline parts were cleaned with solvents, but environmental legislation has encouraged the manufacturer to change to an aqueous cleaning process
Rotary basket washers clean up automotive parts
(June 2003)
Rotary basket washers are providing highly cost effective solutions for washing pump bodies and exhaust manifolds at two Hungarian manufacturers
Automated work transporter for cleaning system
(June 2003)
Kerry Ultrasonics has developed a new automated work transporter for its Microsolve solvent cleaning systems
Foam floor scrubber raises cleaner productivity
(May 2003)
Foam floor scrubbing technology significant savings (up to 30% increased productivity) and simplified machine operation as well as reducing job time and considering the environment
Chlorinated solvents replaced in cleaning
(August 2002)
Engineered fluids provide high performance cleaning and overcome the safety and environmental concerns associated with chlorinated solvents
Maintaining a plate heat exchanger
(August 2002)
Carefully planned and executed maintenance of a plate heat exchanger is a necessity for any successful business strategy concerned with its continued manufacturing productivity
Taking charge of static in plastics mouldings
(July 2002)
The latest developments in a wide range of static control equipment include a high air velocity cleaner and a material handling solution
Small automotive aluminium parts cleaned quickly
(July 2002)
Adaptation of a compact, rotary table, hot aqueous wash machine has been developed to provide the fast efficient cleaning of small aluminium automotive components
Stencil cleaner reduces SMD reject rates
(November 2001)
Kerry Ultrasonics has produced a stencil cleaner that significantly reduces SMD (Surface Mount Device) manufacturers' reject rates
Ultrasonics cleaning baths are programmable
(September 2001)
Kerry has developed bench-top ultrasonic cleaning baths which can be programmed to maximise the quality and repeatability of results
More converts to green cleaning materials
(August 2001)
Tetronik GmbH and Nerb Elektronik have joined the growing number of electronics component manufacturers switching to a cleaning process system using Novec Engineered Fluids
Cool Phos - a solution for a clear way ahead
(March 2001)
At Britax, all wipers are processed with a Cool-Phos pretreatment process that allows the manufactured product to retain its finish whilst clearing unwanted obstacles from a windscreen
Powerful spray jet cleans metal parts quicker
(January 2001)
An increase of up to 40% in spraying power has improved the cleaning performance and reduced the processing times achieved by the latest 'ORBIT' range of rotary basket, aqueous washers