Mike Page, Editor, writes:
We see from your search that you're looking for information on the term "IP67",
and we have a large number of manufacturers' news releases and technical articles here on Manufacturingtalk which will be of interest.
Let me be your guide.
Start with
the news release Control particle size, measurement and moisture from
Malvern Instruments, which we summarised at the time by saying "Two companies will be showing the latest developments in particle sizing systems for solids processing and infrared sensors for on-line measurement and control of moisture and
composition".
A couple of weeks before,
we featured the news release Twin-headed switches for two adjacent machines from
Euchner (UK): "The latest developments from the safety specialists include twin-headed switches designed for use with two adjacent machine access or cell enclosure guards".
In November 2007, we covered the news from Euchner (UK)
concerning its CES-AR-C non-contact safety switch
- take a look at Switch monitors several machine guards at once
which says: "A non-contact safety switch allows the simultaneous monitoring of several safety guards and up to 20 devices can be included in one switch chain".
Take a look also at the news release from Schunk Intec, Mechatronics, robotics, automation and control,
as well as Explosion-proof, smart laser level transmitter from K-Tek,
and Connectors increase interconnection density from Hypertac.
See also:
Digital calipers are rated at IP67
(September 2007)
Digital calipers for use on the shop floor have a high level of water and coolant resistance that ensures that they can be used within harsh industrial environments
Wireless temperature sensing simplified
(August 2007)
Analog thermocouple and RTD instrumentation nodes for the SureCross wireless network facilitate easy, rugged wireless temperature sensing for high repeatability and fast response time
Sensors housed in rugged 12mm barrels
(August 2007)
A range of photoelectric sensors, housed in 12mm threaded metal barrels, feature a visible red sensing beam for easy alignment and two signal indicator LEDs
Sensor/actuator cable flexes 60 million times
(August 2007)
A series of sensor/actuator cables includes one designed for particularly tight bend radii - 4xD and smaller - showing no failure, even after going through 60 million cycles
Linear encoder ensures accurate cutting-off
(August 2007)
An incremental linear encoder fitted to a billet cutting-off saw enables tighter tolerance cutting, so avoiding wastage in cutting expensive nickel alloys stock
Miniature sensors apply to testing machines
(August 2007)
Supplier of miniature sensor products now offers a range of force and pressure sensors, load cells, transducers and accelerometers for testing systems and monitoring
Linear encoders provide automation accuracy
(July 2007)
Automatic stub saw and MIG welding systems used for leading aluminium smelters require precise positioning capabilities of its encoders, TTL output and high levels of contamination protection
Wireless platform designed for industry
(July 2007)
Specifically designed from basic principles for industry, a wireless communications platform has RF design, power management and system integrity
European distributor of portable, rugged printers
(June 2007)
Extech Instruments has appointed Handheld Europe to distribute their portable, rugged printers with IEC68 certification for environmental extremes
Another free product CD from Sixnet
(June 2007)
Key CD features include etherbus series of industrial power over ethernet products
Circuit breakers protect in harsh conditions
(June 2007)
Aerco has supplied the E-T-A 3120-F7 series of single and two-pole, high-performance, thermal-magnetic circuit breakers with rocker switch actuation
Award-winning machine vision inspection sensors
(June 2007)
Cognex has announced the award-winning Checker 200 series of machine vision inspection sensors, which are powerful, but still small enough to fit almost anywhere
CNC laser welders assisted by advanced vision
(June 2007)
A high-performance family of vision sensors were chosen by a German builder of CNC laser profiling systems for an independent vision system with robust hardware conforming to IP67 (NMEA 6)
Robust differential pressure transmitters
(June 2007)
Endress and Hauser has announced the Cerabar S and Deltabar S differential pressure transmitters, both with robust, dual-chambered stainless steel or epoxy coated aluminium housings
Direct-drive linear motor shrinks pick-and-place
(June 2007)
Copley Motion Systems' STB11 motors are direct-drive linear motors which combine a slim form factor with high speed and 25g acceleration
Interconnect system eliminates up to 5 connectors
(May 2007)
ITT Electronic Components has developed an interconnect system that eliminates up to five different cable connectors with its stackable connector modules
Draw-wire sensors offer robust, reliable sensing
(May 2007)
Micro-Epsilon has introduced the wireSENSOR range of digital and analogue draw-wire displacement sensors for machine builders and OEMs who require low cost, robust, reliable sensing solutions
Vibration sensors with the latest M12 connectors
(May 2007)
Vibration sensors from Hansford Sensors have been made available with two types of 12mm connector, the standard MS series or the M12 connector
New compact high speed, twin lane counter
(May 2007)
Easiweigh, part of the GSH Group, is launching its new Twin Lane Counter at the TOTAL Show 2007
Approvals granted for portable gas detectors
(May 2007)
Crowcon extends UL and CSA approved portable gas detector range
RF connectors for high performance transmitters
(May 2007)
Quadrant Connections has introduced SimFix Pro and SimFix ST, RF connectors with threaded couplings for use in high performance transmitter applications
Coriolis mass flow meter range at exhibition
(May 2007)
Bell Flow Systems will be launching a range of Coriolis mass flow meters, suitable for measuring a variety of liquids including aggressive and contaminated media, at Total Processing and Packaging
Multi-pin circular electronic connector
(May 2007)
PEI-Genesis, approved by Amphenol-Air LB to assemble its range of VG95234 multi-pin circular connectors, offers a 48-hour assembly service
Chemical-resistant photoelectric sensors
(May 2007)
Banner Engineering has announced the miniature World-Beam Q12 series of photoelectric sensors with liquid-tight PFA jackets for use in wet and corrosive industrial environments
Five-pole connector for sensor applications
(May 2007)
Harting has introduced a 5-pole M12 connector designed for sensor applications where five connections are involved
Shock log recorder for logistics
(April 2007)
A New Generation of Shock and Vibration Monitor Launched by Lamerholm Lamerholm Electronics is pleased to announce the launch of the new RD398 ShockLog Recorder
Miniature linear motor for pick-and-place systems
(April 2007)
Copley Controls has introduced the ServoTube small-silhouette STB11 linear motor, a miniature direct-drive linear motor which reduces space requirements in pick-and-place systems
Etherbus power over ethernet range
(April 2007)
Etherbus ideal for industrial applications where consistent performance and long-term reliability are a must
Rugged PDA with Windows mobile 5.0
(April 2007)
Rugged field PC weighs less than 17 ounces and has daylight readable display
Double density connectors for autosport
(March 2007)
Deutsch's family of double density connectors for autosport design engineers brings benefits of space and weight, both highly prized on the modern racing car
Moisture analyser and transmitter in one
(March 2007)
The multitasking HygroPro from GE-Sensing combines performance and practicality, features commonly found in top-of-the-line moisture analysers, as a moisture analyser and a transmitter
Connector for autosport applications
(March 2007)
A connector for Autosport designers that almost doubles the number of connectors in a standard shell, reducing the weight of the wiring harness in the vehicle, has been developed by Deutsch
Connectors for harsh environments
(March 2007)
Deutsch UK has become the first maker of connectors to meet the American Boat and Yacht Council's E-11 specification, covering AC and DC Electrical Systems on Boats
Autosport connector reduces harness weight
(March 2007)
The 12-41 connector was launched at the Autosport Show in January 2006 by Deutsch