Mike Page, Editor, writes:
We see from your search that you're looking for information on the term "Oscilloscopes",
and we have a large number of manufacturers' news releases and technical articles here on Manufacturingtalk which will be of interest.
Let me be your guide.
Start with
the news release Micro metrology equipment market expands from
Frost and Sullivan, which we summarised at the time by saying "Research shows that the world micro metrology equipment market is expanding steadily and may nearly double - to US$1,382.5 million - by 2013".
A few weeks before,
we featured the news release Motion control test and debug at ETEL from
XJTAG: "XJTAG system used at ETEL to improve and speed up the process of debugging and testing its PCBs".
In April 2007, we covered the news from Yokogawa Europe - Test and Measurement
concerning its LIN Bus analysis
- take a look at LIN Bus analysis added to digital oscilloscope
which says: "Yokogawa Europe has added an analysis function for the LIN Bus to its SignalXplorer DL9000 series of digital oscilloscopes, with analysis results decode display (for CAN and LIN)".
Take a look also at the news release from TTi (Thurlby Thandar Instruments), 'Scope for life' warranty on oscilloscopes,
as well as More control for Engineers with LabVIEW extension from National Instruments,
and Thermal imaging products fit with test equipment from SJ Electronics.
See also:
High-performance mixed-signal oscilloscope
(February 2007)
A high-performance mixed-signal oscilloscope combining four 1 GHz analogue channels with a 32-bit logic input has been announced by Yokogawa, named the SignalXplorer DL9710L
Boundary scan test system are compliant
(February 2007)
To meet the demand for its boundary scan test system, XJTAG, supplier of IEEE Std 1149.1 compliant boundary scan tools, has announced the appointment of eight new distributors
High-performance digital oscilloscopes
(September 2006)
The new Yokogawa busXplorer-USB is a compact USB 2.0 compliance test solution based on the company's DL9240/9240L family of high-performance digital oscilloscopes
Tektronix instruments controlled from PCs
(September 2006)
National Instruments is supporting digital storage oscilloscopes in NI SignalExpress Tektronix Edition, a PC-based measurement software to quickly process measurements without programming
Software enhances laser interferometer measurement
(August 2006)
Software package enables real-time, high-resolution dynamic motion analysis of linear or angular positioning accuracy, velocities, accelerations and vibrations for laser interferometer measurements
Exhibition to show machine tool technologies
(August 2006)
With the rapid growth in Turkey's installed base of CNC machine tools, there is expected to be high levels of interest in products that improve the operating capabilities of these machines
Eight-channel oscilloscope lowers test costs
(July 2006)
An eight-channel high-speed data acquisition digitiser offers a cost-effective alternative to systems that use multiplexed A/D converters or switches to increase channel count
General purpose digital storage oscilloscopes
(July 2006)
The GDS 2000 series of digital storage oscilloscopes, just launched by GW Instek, is destined to become the new benchmark for mid-range, general-purpose DSOs
Embedded serial triggering and analysis module
(June 2006)
An embedded serial triggering and analysis module, the DPOEMBD, is now available from TTi to convert the Tektronix DPO4000 oscilloscope family into a powerful tool for embedded system designers
Focused metrology in Czech Republic
(June 2006)
Renishaw is increasing its focus on the Czech Republic, where it will be introducing a new range of products at this year's MSV exhibition, being held in Brno from 18th to 22nd September
Calibration and certification standards falling
(June 2006)
Trends suggest that a surprisingly high number of instruments used in industry are no longer being properly calibrated and certificated
Probes allow reliable unmanned machining
(May 2006)
Renishaw is focusing on time and throughput issues at MACHTOOL 2006, being held in Poznan, Poland, from 19th to 22nd June 2006
Russian show to feature metalworking productivity
(May 2006)
Latest productivity ideas for CNC machine tools include a compact touch probe for machining centres and mill-turn machines and tool recognition system for high-speed tool breakage detection
PCI Version oft Dynamic Range Digitiser
(April 2006)
Award-Winning PC-Based Oscilloscope Delivers Universal Instrument Capability for PCI and PXI
Programmable power supply improves accuracy
(March 2006)
Programmable power supply exceeds the accuracy of other PXI power supplies with high-resolution setpoints and readback measurement capability while reducing test times
Testing and debugging of low-speed serial buses
(March 2006)
Now available from TTi is the Tektronix TDSVNM application software for the efficient testing and debugging of low-speed serial buses including CAN and LIN networks
Encoders and motion analysis tools to be shown
(February 2006)
MACH exhibitor offers systems to improve machine tool and CMM productivity as well as a range of compact optical, laser interferometer and magnetic position feedback encoder systems
Meaurement systems up machine tool/CMM throughput
(February 2006)
Measurement systems and probe maker is to focus on time and throughput issues at MACH 2006, with products that will significantly reduce inspection times on machine tools and CMMs
Latest position feedback encoders to be shown
(February 2006)
As well as position feedback encoder systems, a Koran exhibition will show motion analysis software demonstrated in conjunction with a laser interferometer measurement system for machine calibration
Digitiser Named Test Product of the Year
(February 2006)
PXI Digitiser Receives Highest Honour from Test and Measurement World
New generation digital phosphor oscilloscopes
(February 2006)
Tektronix has announced the availability of the DPO4000 Digital Phosphor Oscilloscopes (DPOs), a portable series of models developed upon a new generation platform
Benchtop oscilloscope-to-PC connectivity seamless
(February 2006)
Interactive PC-based measurement software is designed for test engineers who need to quickly acquire, analyse and document measurements on the benchtop without programming
Toolmaking innovations appear at Indian show
(February 2006)
For India's mould and die industry, a new tool recognition system for high-speed broken tool detection, part inspection software, and a high accuracy touch probe will be introduced at DieMould India
Machine tool technology advances shown in Ukraine
(February 2006)
Latest sensors and probes for raising the productivity of machine tools include a compact touch probe and tool recognition system for high-speed tool breakage detection
Arbitrary/function waveform generators
(February 2006)
The new Tektronix AFG3000 Series of arbitrary/function generators, consisting of six models with the market-leading 240 MHz dual-channel, 2 GS/s AFG3252, is now available in the UK from TTi
Metrology products assist Turkish manufacturing
(January 2006)
A major focus at Kalite 2006 will be products for CNC machine tools, including a compact touch probe for machining centres and mill-turn machines and a system for high-speed tool breakage detection
Improving China's CNC machine tool capabilities
(January 2006)
With the rapid growth in China's installed base of CNC machine tools, there is expected to be high levels of interest in products that improve the machines' operating capabilities
Encoder catalogue incudes precise linear scale
(January 2006)
Detailing high accuracy linear scale and magnetic rotary encoders, latest catalogue includes a high accuracy linear scale and a range of high-performance UHV encoders
NI Flexible-Resolution Digitiser Best in Test
(January 2006)
Test and Measurement World Names NI Flexible-Resolution Digitiser Best in Test
Systems benefit CMMs and CNC machine tools
(January 2006)
High-speed broken tool detection, PC software for part inspection on machine tools and an ultra-compact high accuracy touch probe for small machining centres will be demonstrated in Belgium
Digital phosphor oscilloscopes
(January 2006)
Tektronix has announced the introduction of new DPO7000 Digital Phosphor Oscilloscopes (DPOs)
Oscilloscope probes are feature rich
(January 2006)
Tektronix, a worldwide provider of test, measurement and monitoring instrumentation, has introduced a new probe interface architecture and a new family of versatile, feature-rich probes
New range of position feedback encoders go on show
(November 2005)
Renishaw is highlighting its new range of encoder solutions at the Semicon Japan exhibition and conference, being held at the Makuhari Messe, Chiba, from 7th to 9th December 2005
Oscilloscope software application
(November 2005)
Tektronix has announced a new oscilloscope software application for validating all types of UWB devices from new generations of secure communications to consumer electronics