Latest news on Manufacturingtalk categorised by product type
Portable power tools
Archive page 2 of 4
Our RSS feed for Portable power tools press releases
Electric screwdrivers suit many production needs
Low-voltage electric screwdrivers are of straight, trigger start design with reverse control, auto shut-off and torque adjustment, and torque locks are available for some units.
News from Kaisertech ( 9 August 2005)
Five-inch angle grinder speed range extended
A variable speed grinder with a wider speed range than similar grinders grinds and cuts stone when on full speed, and has lower speeds for stone finishing and polishing.
News from Metabo ( 8 August 2005)
Brochure has latest power tool models
Latest portable benchtop woodworking tools as well as new cordless impact driving and drill'driving tools are included in metabo's new products brochure.
News from Metabo (21 June 2005)
Air turbine tools end 'white finger' effects
Powered to 1.4HP by a new governed turbine drive, a power tool has far lower vibration and weight than traditional vane tools and accesses tight work areas.
News from ITC Tooling (17 June 2005)
Miter saw has easily adjustable turntable
Featuring a turntable position that can be easily adjusted between 50 deg on the left and 60 deg on the right, a 10in miter saw is ideal for crosscutting material up to 12in wide and 3-3/4in high.
News from Metabo (30 May 2005)
Cordless impact driver has high torque
Cordless impact driver that provides increased speed and performance in a variety of applications is ideal for quickly driving bolts, screws, and nuts.
News from Metabo (19 May 2005)
Power assembly tools communicate electronically
A range of elecrtric power tools is believed to be the first hand held range of assembly tools to feature advanced electronic communication and control technology.
News from Desoutter Sales (17 May 2005)
Drill/driver power tool offers more power
Drill/driver power tool that offers more power and a faster charge than earlier models is equipped with 20 torque settings, plus a drill setting with forward and reverse modes.
News from Metabo (27 April 2005)
Air screwdriver conditions monitored during use
Air operated hand screwdriver unit is used in conjunction with a signal box, which evaluates the OK/Not OK signals from the screwdriver to maintain correct tightening torque and/or revolutions.
News from Weber Automatic Assembly Systems ( 7 April 2005)
Mitre saw removes dust through its base
A 12in dual bevel sliding compound mitre saw features the industry's largest crosscut capacity and is equipped with a system that removes dust through the base of the saw.
News from Metabo ( 1 April 2005)
Production drilling without using air motors
Instead of using air motors, a system that allows customers to drill holes at high rev/min rates - up to 11,500 rev/min - uses adjustable high speed DC motors that do not loose speed under load.
News from AutoDrill (21 March 2005)
Cordless drill/driver offers more power
A 12V cordless drill/driver has a new motor that offers high power - up to 460 in.lb of torque - and electronics allow infinite no-load speeds up to 1,350 rev/min.
News from Metabo (14 February 2005)
New tools range offers value
CP Desoutter has announced the new Redi-Power General Industrial range of tools.
News from Desoutter Sales ( 8 February 2005)
Power jigsaw is comfortable to work with
A variable speed jig saw that cuts to depths of 5.1/4in in wood, and also cuts metals and plexiglass, has a new padded top handle grip for improved operator comfort and control.
News from Metabo ( 3 December 2004)
Hand and power tools promoted
During December, a UK tools supplier is promoting extensive ranges of over 850 hand and power tools, accessories and consumables and is offering a 5% discount. Brochure available
News from Rapid Electronics Ltd. ( 2 December 2004)
Saw blades include jig saw types for power tools
Five new lines of jig saw and reciprocating saw blades are available in a wide selection of blade materials - including shatter-proof ones - edges and types for a variety of cutting situations.
News from Metabo ( 5 November 2004)
Polisher provides power and torque
Metabo now offers a 7in polisher that provides 40% more torque and 70% more rated input power than the previous model.
News from Metabo (12 October 2004)
Power tools brochure details five additions
The Summer/Fall 2004 edition of a power tools products brochure includes details of new rotary hammers, jig saws with five-position orbital action, reciprocating saw, and polisher.
News from Metabo (14 September 2004)
Reciprocating saw has rotatable handle
Reciprocating saw features non-slip rubber coated handle that can be rotated through four positions without the use of a tool, enabling the operator to optimise position when cutting on site.
News from Metabo ( 3 September 2004)
Nibbler loses weight, but not its capacity
An established nibbler has undergone a transformation in that while its weight has been reduced from 11.7kg to 8.3kg, it retains same capacity and speed with improved work visibility. Brochure available
News from Trumpf (26 August 2004)
Earlier news from this category...
Latest news from this category...
