Latest news on Manufacturingtalk categorised by product type
Milling cutters
Archive page 10 of 11
Our RSS feed for Milling cutters press releases
Micro-grained ball nose cutter mills hard steels
Manufactured from ultra wear resistant micro grain carbide, a two flute ball nosed, straight shank cutter is designed to machine steels hardened to 65 Rockwell C.
News from ITC Tooling ( 9 February 2004)
Carbide cutters machine aluminium at high speeds
Specifically designed for machining aluminium, solid carbide straight shank cutters have the versatility to machine a host of materials ranging from plastic to brass and copper.
News from ITC Tooling ( 9 February 2004)
Diamond end mills offer longer life in graphite
Diamond coated, high wear resistant micro grain carbide end mills have a 30 degree helix specifically designed for machining graphite with longer tool life than equivalent carbide tools.
News from ITC Tooling ( 6 February 2004)
Plunge cutters mill alloys and SS at high rates
Plunge milling cutters are designed for high metal removal rates when machining a wide variety of metals including stainless steel aluminium and high temperature alloys. Brochure available
News from Stellram (23 January 2004)
High speed shoulder cutter mills at high rates
Shoulder cutter is designed for high speed milling of aluminium and with a 22mm insert version, offers extremely high metal removal rates with very high efficiency.
News from Sandvik Coromant UK (13 November 2003)
Two milling cutter systems - one indexable insert
Two milling cutter systems - a square shoulder mill and a helical cutter - use only one type of insert for the universal machining of steel, cast iron materials and stainless steels.
News from Kennametal UK (12 November 2003)
Milling grades offer production reliability
Latest coated carbide milling grades for medium to heavy machining of steel and nodular CI enable users to increase tool life by up to 30% - a considerable advantage in production.
News from Kennametal UK ( 6 November 2003)
Higher feed rates offered for face-milling SS, CI
For the more cost-efficient machining of steel, cast iron materials and stainless steels a face milling system offers high feed rates and excellent insert edge stability..
News from Kennametal UK ( 5 November 2003)
Low power face mill engenders high productivity
A low power, high productivity face mill series is intended for universal and more cost-efficient machining of steel, cast irons, stainless steels and aluminium.
News from Kennametal UK ( 5 November 2003)
AlCrN coated milling cutters offer longer life
AlCrN coated milling cutters used for finishing Ck45 steel at cutting speeds of 200m/min and 400m/min, attained a substantially longer service life than TiCN and TiAlN coated cutters.
News from Balzers AG ( 3 November 2003)
Ball nose cutter finish mills 64 HRC steels and CI
Efficient indexable ball nose end mill, featuring a coated micro-grain carbide grade, will finish machine steel and chilled cast iron components up to 64 HRC at a cutting speed of Vc=240 m/min.
News from Kennametal UK (30 October 2003)
Novel end mill offers high cutting stability
Grooving specialist is to launch an end milling system that features a replaceable carbide milling insert, which locates in a steel head brazed to the end of a carbide shank.
News from Horn UK (20 August 2003)
End mill doubles productivity, cuts insert costs
User application article Workholding and toolholding equipment manufacturer has changed its end mill supplier and made dramatic improvements in productivity, particularly for machining tough steels such as 817M40 (EN24T). Brochure available
News from NCMT (25 July 2003)
Extra short micro cutters mill hard materials
Micro-milling cutter has an extra-short flute length that increases the rigidity of the tool and so allows for high feed rates to be achieved as well as enhancing tool life, in hard materials.
News from Dixi UK (30 April 2003)
Milling cutters offer faster metal removal rates
Featuring ultra-compact cartridges, these milling cutters offer faster metal removal rates, reduced carbide insert costs and improved versatility.
News from Max-Cut Tools (10 April 2003)
Ball-nose endmill intended for high speed finishes
Ball-nose endmill performs semi-finishing and finishing applications at high feed rates and has two effective cutting edges even with small depths of cut.
News from Iscar Tools (19 March 2003)
Trigon geometry raise milling metal removal rates
Family of cutters facilitate milling at very high feed rates - up to 3.5mm/tooth - for high-speed metal removal and use trigon-like shaped positive inserts having a large radiused cutting edge.
News from Iscar Tools (19 March 2003)
Round insert mills ramp down into workpieces
In addition to face milling, these new face mills use securely clamped round inserts and are able to ramp down, perform undercutting and machine in an upwards direction.
News from Iscar Tools (19 March 2003)
Milling inserts get deeper into the groove
Standard three tooth milling cutters include a derivative with a reduced diameter boss, allowing interpolative milling of deeper grooves than hitherto.
News from Horn UK (24 February 2003)
Cutting tool catalogue includes free methods CDs
A comprehensive catalogue of tools and methods for the die and mould making industry includes two free CDs - one containing a metal cutting data module to optimise cutting data.
News from Sandvik Coromant UK (11 October 2002)
Earlier news from this category...
Latest news from this category...
