Latest news on Manufacturingtalk categorised by product type
Milling cutters
Archive page 6 of 11
Our RSS feed for Milling cutters press releases
Facemills now have exchangeable cassettes
Face-milling cutters have an exchangeable cassett system to make easier adjustments between rough-, semi-finish steel and cast iron and mirror-fnish aluminium, cast iron and hardened steel.
News from Sandvik Coromant UK (14 November 2005)
Modular drilling system has long life
A modular drilling system, with disposable cutting tips that can be changed quickly both on and off the machine, has optimised cutting geometry that generates little or no burrs.
News from Kennametal UK (14 November 2005)
Milling cutters have high aluminium removal rates
Milling cutters range with close pitch design allows aluminium faces to be milled more economically at high metal removal rates, with virtually no back cutting to generate high surface quality.
News from Kennametal UK (14 November 2005)
Milling cutters smooth and increase performance
Milling cutters produce outstanding machining results in operations such as circular plunging, ramping and 3D milling, as well as face and shoulder milling.
News from Kennametal UK (10 November 2005)
End mill range focuses on high performance
Five different types of end milling cutters, with which all possible diameters are covered, are designed for high performance cutting in the widest range of applications.
News from Mapal ( 9 November 2005)
End mills machine deep recesses and grooves
Solid carbide miniature end-mill is particularly suitable for machining deep recesses and grooves and for shaping deep contours in precision componentsand moulds.
News from Hitachi Tool Engineering Europe ( 9 November 2005)
End mill raises routing efficiency
Solid carbide end mill can provide sustainable improvements in routing efficiency, irrespective of the strength of the machine and the kind of machining operation to be performed.
News from Hitachi Tool Engineering Europe ( 9 November 2005)
Tooling package cut machining time by half
In manufacturing engine casings for Airbus, a package of tools and applications cut machining time at a supplier in half and reduced its costs by 25%.
News from Kennametal UK ( 9 November 2005)
Generator part machining time halved
When a customer needed to realise cost improvements in the manufacturing of veins and stems, a package of tools and applications cut machining time in half.
News from Kennametal UK ( 9 November 2005)
Hydraulic chucks suit tough drilling, boring
For workpieces with irregular contours that require long, slim toolholders, slim hydraulic chucks cope with demanding drilling, boring and reaming operations.
News from Kennametal UK ( 9 November 2005)
Longer life tools solved production problems
User application article When moving production of ball-lock punches from machining centres to turning centres, AW Precision encountered a number of tooling problems - until it found tools with longer life.
News from ITC Tooling ( 8 November 2005)
Tool life improved ten-fold on SS machining
User application article Gas turbine component manufacturer has achieved a ten-fold improvement in tool life, improved as-machined surface finish and improved set-up consistency on tool change.
News from Horn UK ( 3 November 2005)
Face mill redesign raises feedrates
A massive tool body from steel in a monobloc design and with fixed, brazed PCD blades are the main features of a face milling cutter allowing higher feed rates.
News from Mapal ( 2 November 2005)
Industry-specific milling cutters save costs
Milling cutters with higher feedrates, special tooling for medical implants and micro-tooling for use with Swiss-type automatics save costs for important industries.
News from Kennametal UK ( 2 November 2005)
Micro-fine grain carbide tools wear longer
Micro-fine grain solid carbide miniature tools with new cutting geometry and very small diameters provide a wear resistance in pre-hardened steels close to that of CBN tools.
News from Hitachi Tool Engineering Europe (31 October 2005)
Tools machine deep ribs, slots in 70HRC steel
Fine grain solid carbide miniature tools are specially suited to machining deep ribs and slots in moulds up to 70HRC - and for deep contours - up to 35xdiameter.
News from Hitachi Tool Engineering Europe (31 October 2005)
Carbide milling cutters shown for motorsports
Specialist tooling manufacturer will exhibit a complete range of tooling solutions - including 2 flute solid carbide cutters - for the MotorSport industry.
News from ITC Tooling (26 October 2005)
Carbide roughing cutters mill hardened steels
Carbide roughing cutters that can machine hardened steels at speeds ranging up to 200m/min will be included in a wide range of milling cutters to be shown in Wales.
News from ITC Tooling (24 October 2005)
Diamond coated end mills machine graphite
Roughing and finishing end mills for machining graphite include a diamond coated roughing 4-12mm diameter end mills and 3-fluted solid carbide 2-12mm diameter end mills.
News from Horn UK (12 October 2005)
Solid carbide cutters tap holes in steels
Among a wide selection of drills, taps, milling cutters and toolholders, Guhring introduced aolid carbide taps for threading steel and a PCD insert face-mill for non-ferrous alloys.
News from Guhring oHG ( 7 October 2005)
Earlier news from this category...
Latest news from this category...
