Latest news on Manufacturingtalk categorised by product type
Drilling, boring and reaming
Archive page 5 of 5
Our RSS feed for Drilling, boring and reaming press releases
High performance drills have highly stable inserts
Designed for high feed rates and long tool life for reliable bore machining the inserts used in these high performance drills suit interrupted cut and penetrating angled castings and rolling skins.
News from Komet Präzisionswerkzeuge ( 5 November 2003)
Drill sizes changed without unclamping
Modular high-performance drill adds value by reducing machining time and down-time. Its clamping system enables the cutting tool to be changed while still in the machine.
News from Kennametal UK ( 4 November 2003)
Insert drill range and grades extended
A range of insert drills for bores with length to diameter ratios of 5D has been extended up to 36mm diameter along with two new grades for cutting cast irons and steels.
News from Komet Präzisionswerkzeuge ( 4 November 2003)
Small bores produced at high cutting speeds
Twist drills that produce small bores at high cutting speeds and feed rates are now available in an extended diameter range of 8 to 16mm.
News from Komet Präzisionswerkzeuge ( 4 November 2003)
Combination tool centres, drills and countersinks
A tool that spots or centres can also countersink in the same operation prior to drilling a hole and saves on cycle times in machining centres and lathes. Brochure available
News from NCMT ( 3 November 2003)
Pilot drill lives extended by up to factor of 25
By completelt revising its drills for bores up to 9D, Komet has significantly improved concentricity through design and production improvements to extend pilot drill life by up to 25 times.
News from Komet Präzisionswerkzeuge (30 October 2003)
Boring tool has higher penetration rate
Designed with internal, through coolant supply a versatile boring tool features three cutting edges that allow a higher penetration rate with maintained tool life.
News from Sandvik Coromant UK (29 September 2003)
Precision carbide drill targets ISO-N materials
High precision carbide drills have been developed specifically for use with ISO-N materials, particularly aluminium alloys with a Si content of 8-12% or less.
News from Sandvik Coromant UK (22 April 2003)
Agreement extends distributorship of cutting tools
Extensive stocks of 700 different types of high-quality Dormer jobber drills, reamers, taps and cutters are available through a network of 40 dealers.
News from Serco Ryan (30 September 2002)
Stepdrills avoid tool changing and save time
In trailer manufacture, a number of different holes have to be drilled for securing attachments. Much time has been saved in using special stepdrills and so avoiding tool changing.
News from G and J Hall (15 August 2002)
Step drills cut down time and tool inventory
User application article Using step drills speeds up the fabrication process at a trailer manufacturer because the company does not have to keep changing drill bits for the drilling of different sized holes.
News from G and J Hall (26 July 2002)
Swarfless drilling cuts hole production time
User application article The simple process of drilling holes in tubular frames has been taken to task with the adoption of the Flowdrill swarfless process and as such, has cut hole production time by 80 per cent.
News from Flowdrill (UK) (23 July 2002)
Swarfless process drills up to 50mm diameter
Now available from Flowdrill (UK) of Chatham, Kent, is a swarfless drilling process for creating holes up to 50mm diameter in pipes and tubes, box sections or fabrications.
News from Flowdrill (UK) (13 June 2002)
Step drill also deburrs hole in many materials
HSS step drills achieve reliable and cost-effective results in a wide range of materials from plastics to stainless steel, and the radius joining each step deburrs the hole.
News from G and J Hall (25 February 2002)
HPM drill chipbreaker geometry is sharp and strong
The new Kennametal Hertel HPM geometry drills can be used for roughing operations at 5xD and high feed rates.
News from Kennametal UK (12 October 2001)
Boring tools produce high quality holes
Precision-boring operations are possible in the 6 to 213mm range, in exceptional cases up to 326mm, in accuracy class IT5. Diameters can be set in under 5 sec on a machining centre.
News from Kennametal UK (12 October 2001)
New drills offer high penetration rates
The new range of NOVEX Mini Stardrill solid carbide drills from Walter GB of Redditch promises unrivalled price-to-performance benefits across the full spectrum of materials and applications. whether
News from Walter GB (30 March 2001)
Drills offer price-to-performance benefits
The new range of NOVEX Mini Stardrill solid carbide drills from Walter GB promises unrivalled price-to-performance benefits across the full spectrum of materials and applications.
News from Walter GB ( 7 March 2001)
Single micron steps for small high precision drill
Floyd Automatic Tooling, a leading source of tooling for CNC sliding head machine tools, have recently added small high-precision carbide drills.
News from Floyd Automatic Tooling ( 3 April 2000)
Latest news from this category...
