Latest news on Manufacturingtalk categorised by product type
Cutting lubricants, coolants, systems and treatment
Our RSS feed for Cutting lubricants, coolants, systems and treatment press releases
Magnetic filter extracts metal cutting fines
User application article UK toolmaker was seeking a highly effective magnetic filtering system that also offered environmental benefits, which it found through using an Eclipse Magnetics Filtramag system.
News from Eclipse Magnetics ( 1 May 2008)
Bielomatik delivers fine spray to cutting tool tip
A metal cutting lubrication system by Bielomatik that delivers a fine aerosol spray to the cutting tool tip can now be retrofitted to existing machine tools.
News from Bielomatik (14 April 2008)
Fuchs metal cutting fluid meets HSE needs
Fuchs Lubricants (UK)'s metal cutting fluid offers optimum machining performance and surface finish and as it follows the latest UK HSE guidelines provides better machine tool cleanliness.
News from Fuchs Lubricants (UK) Plc ( 9 April 2008)
Eclipse magnetic filtration device shortlisted
Claimed to be particularly effective with machine tool oils and coolants, a high-intensity magnetic filter by Eclipse Magnetics significantly improves filtration efficiency over conventional systems.
News from Eclipse Magnetics ( 7 April 2008)
Central metalworking fluids systems monitored
Real-time metalworking fluids monitoring system automatically takes samples from up to four central metalworking fluid systems and provide instant trending information.
News from Castrol UK (20 March 2008)
Metal working fluids reduce hazards
A range of water mix metal working fluids to enable work shops to use the lowest possible hazard labeled metal working fluids.
News from John Neale (19 February 2008)
Cutting lubricants shop floor safety highlighted
A supplier of industrial production lubricants and fluid management services will be majoring on worker health and Safety associated with shop floor use of lubricants.
News from Houghton Plc (12 February 2008)
Water soluble metalworking fluid meets HSE guide
A water soluble metalworking fluid has been developed in response to the new Health and Safety Executive guidelines, concerning the control of bacterial contamination in used coolants.
News from Fuchs Lubricants (UK) Plc (31 January 2008)
Coolant testing kit checks HSE compliance
To conform with UK Health and Safety guidelines, a cutting lubricants supplier has introduced a mobile coolant testing kit for checking water soluablee fluids for bacterial contamination.
News from Fuchs Lubricants (UK) Plc (30 January 2008)
Metal cutting coolants optimise machining
A range of coolants is designed to offer optimum machining performance and surface finish, especially when used in modern CNC machines, as well as provide the best machine cleanliness.
News from Fuchs Lubricants (UK) Plc (25 January 2008)
'Ready to use' metal cutting fluids expanded
Metal cutting fluids, described as 'ready to use', cover metal cutting, tapping, reaming, drilling and turning and their performance is claimed to be exceptional.
News from CRC Industries UK Ltd (23 January 2008)
High-pressure coolant pumps reduce maintenance
High-pressure, hydraulically balanced, coolant pumps for machine tools reduce maintenance costs because there are no packings, cups, or seals, said the manufacturer.
News from Monster Swiss (15 January 2008)
Monitor checks minimum aerosol quantity
lubrication An aerosol monitor enables continuous reliable recording of statistical data relating to aerosol flow to ensure optimum minimum quantity lubrication when metal cutting, producing chips. Brochure available
News from SKF UK ( 4 January 2008)
Lubricant increases SS/alloy grinding productivity
Cutting lubricant has been formulated to increase the productivity of grinding machines working aerospace metals and alloys such as titanium and stainless steel.
News from Master Chemical Europe (24 December 2007)
Save on diamond grinding/lapping waste
To save diamond abrasive during grinding and lapping, a recovery unit keeps diamond completely dispersed during usage by stirring the slurry with a magnetic spin bar.
News from Engis (UK) (22 November 2007)
Oil mist extraction solves grinding problem
User application article Found to be ideal for a heavy duty grinding machine an oil mist extraction unit uses centrifugal impaction to collect the oil mist and safely returning oil to the machine's reservoir.
News from Filtermist International (16 November 2007)
Vacuum self-cleaning drum filter
A permanent filtering net which removes metallic particles from coolants is featured on Spring V, a self-cleaning drum filter which works by vacuum system
News from Losma UK Division (15 October 2007)
How to rationalise metalworking fluids use
User application article Compressor maker and subcontracting firm develops and rationalises the number of fluids used such as grinding fluids for washing and machine-cleaning fluids used for cleaning floors.
News from Master Chemical Europe (30 August 2007)
Precision engineering firm cuts waste water cost
User application article With costs of off-site waste water disposal rising, a precision engineering company invested in a system that dramatically reduced the volume of waste water and assists effluent management.
News from Aqua-save Technologies (27 August 2007)
Coolant extends tool life machining titanium
The use of a water miscible cutting fluid to machine a component in Ti6AL4V titanium increased tool life ifrom 120 min to 150 min and the fluid was not prone to foaming.
News from Jemtech (UK) (31 July 2007)
Meeting metal cutting fluids regulations
Metal working fluids management company assists factories in meeting UK regulations and provides a method by which these systems can be maintained with relative ease.
News from Jemtech (UK) (18 July 2007)
Filter improves boring/reaming finish
User application article Having a high sub-micron filtration capability, a system on a boring and reaming machine is removing ferrous micro particles from re-circulated coolants to improve valve seat surface finish.
News from Eclipse Magnetics (16 July 2007)
Cutting tools release cutting fluid at 360 bar
User application article To keep the machining of advanced aerospace alloyed metals cool, Iscar has developed tools that release 360 bar of pressure and it guarantees the cutting fluid arrives in a liquid state.
News from Iscar Tools (27 June 2007)
Waste water treatment saves GBP 8000/year
User application article Waste water treatment system, that also processes waste machine tool cutting lubricants, has virtually eradicated the need to dispose of waste water off an engineering company's site.
News from Aqua-save Technologies (15 June 2007)
Metalworking fluids management meets HSE rules
User application article Metalworking fluids supplier is able provide a service package, which enables users to meet the new HSE Guidelines for management of metalworking fluids.
News from Houghton Plc (28 May 2007)
Grinding fluid works with plastics too
A cutting fluid originally formulated for the grinding of metals has also proven to be suitable for grinding plastics where accuracy and smooth finish are required.
News from Master Chemical Europe (26 April 2007)
Synthetic grinding fluid meets H and S criteria
A grinding synthetic cutting fluid does not use formaldehyde donor biocide and meets even the most strict health and safety criteria, while offering even better ferrous corrosion protection.
News from Master Chemical Europe (25 April 2007)
Cleaner sucks up swarf and lubricant sludge
Swarf suction cleaner is one of a range of modular low noise strong suction cleaners for cleaning up dust particles and granules, as well as swarf and their accompanying coolants and lubricants.
News from Flextraction (13 April 2007)
Unit has high machine shop air filtration levels
An air filter for treating oil mist, micro-mist, vapours, smoke and odours emitted from the majority of metal machining operations offer the highest and guaranteed filtration levels.
News from Losma UK Division (11 April 2007)
Filter out machine tool oil mist and smoke
High and low pressure air filtration units are able to eliminate oil mist and smoke generated by a variety of machine tools and there is a centralised system available too.
News from Losma UK Division (11 April 2007)
Flat bed cutting lubricant filters are compact
A range of compact, high efficiency flat bed gravity filters will process between 200 and 1000 litres of oil/min and from 400 to 2000 litres of water-based emulsions/min.
News from Losma UK Division (11 April 2007)
Cutting coolant drum filter self-cleans
A drum filter for cutting coolant liquids is a self-cleaning filter and is particularly ideal for work that involves the removal of metal fines produced using machine tools, abrasives and washing.
News from Losma UK Division (11 April 2007)
Portable filtration unit keeps contaminants down
A survey conducted by The Fluid Power Research centre, found that there is wide use of make-up oil additions not meeting manufacturer's contamination guidelines
News from Glanon International ( 2 April 2007)
User friendly filtration for machine tools
Glanon International is a manufacturer of Portable Filtration Systems for Industrial Oil and Coolant, all Glanon Filter-Carts are user friendly tools that make Industrial Fluid Recycling easy.
News from Glanon International ( 2 April 2007)
Alloy machining coolant resists hard water
Fully protected against aluminium staining, a long-life coolant ideal for machining aerospace alloys as well as titanium, steel and cast iron and remains clean and stable in the hardest of waters.
News from Houghton Plc (30 March 2007)
Cutting lubricant control ups performance
Recent refinements to minimal quantity lubrications systems further benefits to metal machining operations by controling precisely the temperature of the oil arriving at the cutting point.
News from Bielomatik (28 March 2007)
Earlier news from this category:
8
7
6
5
4
3
2
1
