Latest news on Manufacturingtalk categorised by product type
Cutting lubricants, coolants, systems and treatment
Archive page 3 of 9
Our RSS feed for Cutting lubricants, coolants, systems and treatment press releases
High pressure coolant jets improve finish
System directs coolant, as a uniform high pressure jet, into the work area ensuring that workpiece and cutting tool tips and edges are kept at stable temperatures during machining operations.
News from Nikken Kosakusho UK (22 September 2006)
Long life fluid used for machining cast irons
A long life, low in use dilution metalworking fluid, specifically developed for the machining of CGI, ductile and grey cast iron components, provides consistent cooling at the tool/material interface.
News from QSCD (19 September 2006)
Oil mist filtration unit collects efficiently
An oil mist filtration unit, which uses advanced disc stack centrifuge technology to achieve high collection efficiency achieves 99.997% separation of 0.3 micron diameter airborne particles.
News from Kitagawa Europe (15 September 2006)
Low hazard oil used in aluminium machining
User application article A synthetic, biodegradable, neat cutting oil satisfied the requirement for a low viscosity, low hazard and low residue fluid for use in mist lubrication when machining aluminium components.
News from John Neale ( 5 September 2006)
Coolant solves foaming and scumming problems
User application article Coolant supplier has a special cutting coolant design service, which formulates coolants for difficult or unique problem situations - in this case, to eliminate foaming and scumming.
News from John Neale (22 August 2006)
High pressure coolant system is effective
A high pressure coolant system is very effective when deep hole drilling, for breaking and clearing swarf from the machining area and for machining of difficult materials such as stainless steel. Brochure available
News from NC Engineering ( 8 August 2006)
Coolant system eases turning of difficult metals
Coolant system makes the turning of difficult-to-machine materials like hardened steels, wear-resistant alloys and titanium-based alloys faster while total machining costs reduce.
News from Hardinge Machine Tools ( 8 August 2006)
Synthetic neat cutting oil is bio-degradable
A high performance fully synthetic bio-degradable neat cutting oil - for many uses on all metals - is based on saturated chemistry, which gives this product excellent thermal stability.
News from John Neale ( 7 August 2006)
Filtration using whole oils at competitive prices
Industrial filtration using whole oils is cleaner for the environment at similar prices to those installations with added products and use regenerative cartridges, valid for large flows.
News from Ecofluide ( 3 August 2006)
Grinding oils reduce misting, double wheel life
Two high performance neat grinding oils are designed to minimise the misting problems caused when high-pressure fluid delivery systems are used with today's high-speed grinding processes.
News from Castrol UK ( 7 July 2006)
Metal cutting/grinding lubricant is water-soluable
A water-soluable metal cutting lubricant is suitable for use with all types of materials, ranging from commonly-used steels to exotic metals and carbides, using grinding as well metal cutting.
News from Oel-Held (UK) ( 6 July 2006)
Minimal quantity lubrication ups cycle times 30%
A minimal quantity lubrication system brings economical, safer and environmental benefits to lubrication at the 'cutting tip' to cut a total machining cycle time by up to 30%.
News from Bielomatik ( 6 July 2006)
IC engine maker's cutting fluid disposal reduced
User application article A cutting fluid reprocessing facility, has cut waste fluid disposal at an internal combustion engine plant's two transfer cylinder head and block line systems by more than 80%.
News from Castrol UK (22 June 2006)
Dedicated coolant keeps magnesium cutting clean
A dedicated coolant which is compatible with all magnesium alloys and can withstand magnesium salt levels up to 4000 ppm is clean running and maintains tool sharpness for optimal cutting.
News from Master Chemical Europe (22 June 2006)
Oil mist and coolant filtration maker is in UK
Metalworking oil mist and coolant filtration equipment maker Losmo has directly entered the UK by operating under its own name with sales and accessory deliveries from the West Midlands.
News from Losma UK Division (21 June 2006)
Cutting fluid is clean and efficient
A high performance semi-synthetic water based soluble cutting fluid combines all the benefits of neat oil whilst eliminating the main operational drawbacks to provide a cleaner fluid. Brochure available
News from Batoyle Freedom Group (21 June 2006)
Universal cutting fluid tolerates hard water
Low-foaming and extremely hard water tolerant, a universal fluid for multi-metal job shops can be used to machine a wide range of ferrous, non-ferrous and non-metallic materials.
News from Master Chemical Europe (16 June 2006)
Powertrain award win for environmental excellence
User application article Wolverhampton-based Turner Powertrain Systems has won a Silver Award for Environmental Excellence in a global competition run annually by its parent company Caterpillar.
News from Castrol UK (12 June 2006)
Semi-synthetic cutting fluid in 5-litre packs
Castrol is now offering its versatile, semi-synthetic Hysol Excel cutting fluid in 5-litre packs, making it more convenient for smaller metalworking companies to buy.
News from Castrol UK ( 2 June 2006)
Coolant dedicated to magnesium alloy cutting
A dedicated, cost competitive coolant that is compatible with virtually all magnesium alloys up to 4000 ppm provides exceptionally clean running and maintains tool sharpness for optimal cutting.
News from Master Chemical Europe (24 May 2006)
Earlier news from this category...
Latest news from this category...
