http://www.manufacturingtalk.com/indexes/categorybrowsedt.html Cutting lubricants, coolants, systems and treatment latest news on Manufacturingtalk en-gb Copyright (C)2008 Pro-Talk Ltd. All rights reserved. Thu, 15 May 2008 08:00:00 UT Thu, 15 May 2008 08:00:00 UT http://www.pro-talk.com/images/protalklogo90.gif http://www.pro-talk.com/ 90 79 UK toolmaker was seeking a highly effective magnetic filtering system that also offered environmental benefits, which it found through using an Eclipse Magnetics Filtramag system. Thu, 01 May 2008 08:00:00 UT Eclipse Magnetics http://www.manufacturingtalk.com/news/eli/eli108.html A metal cutting lubrication system by Bielomatik that delivers a fine aerosol spray to the cutting tool tip can now be retrofitted to existing machine tools. Mon, 14 Apr 2008 08:00:00 UT Bielomatik http://www.manufacturingtalk.com/news/biv/biv104.html Fuchs Lubricants (UK)'s metal cutting fluid offers optimum machining performance and surface finish and as it follows the latest UK HSE guidelines provides better machine tool cleanliness. Wed, 09 Apr 2008 08:00:00 UT Fuchs Lubricants (UK) Plc http://www.manufacturingtalk.com/news/fuh/fuh103.html Claimed to be particularly effective with machine tool oils and coolants, a high-intensity magnetic filter by Eclipse Magnetics significantly improves filtration efficiency over conventional systems. Mon, 07 Apr 2008 08:00:00 UT Eclipse Magnetics http://www.manufacturingtalk.com/news/eli/eli107.html Real-time metalworking fluids monitoring system automatically takes samples from up to four central metalworking fluid systems and provide instant trending information. Thu, 20 Mar 2008 08:00:00 UT Castrol UK http://www.manufacturingtalk.com/news/cst/cst164.html A range of water mix metal working fluids to enable work shops to use the lowest possible hazard labeled metal working fluids. Tue, 19 Feb 2008 08:00:00 UT John Neale http://www.manufacturingtalk.com/news/joe/joe129.html A supplier of industrial production lubricants and fluid management services will be majoring on worker health and Safety associated with shop floor use of lubricants. Tue, 12 Feb 2008 08:00:00 UT Houghton Plc http://www.manufacturingtalk.com/news/hoh/hoh114.html A water soluble metalworking fluid has been developed in response to the new Health and Safety Executive guidelines, concerning the control of bacterial contamination in used coolants. Thu, 31 Jan 2008 08:00:00 UT Fuchs Lubricants (UK) Plc http://www.manufacturingtalk.com/news/fuh/fuh102.html To conform with UK Health and Safety guidelines, a cutting lubricants supplier has introduced a mobile coolant testing kit for checking water soluablee fluids for bacterial contamination. Wed, 30 Jan 2008 08:00:00 UT Fuchs Lubricants (UK) Plc http://www.manufacturingtalk.com/news/fuh/fuh101.html A range of coolants is designed to offer optimum machining performance and surface finish, especially when used in modern CNC machines, as well as provide the best machine cleanliness. Fri, 25 Jan 2008 08:00:00 UT Fuchs Lubricants (UK) Plc http://www.manufacturingtalk.com/news/fuh/fuh100.html Metal cutting fluids, described as 'ready to use', cover metal cutting, tapping, reaming, drilling and turning and their performance is claimed to be exceptional. Wed, 23 Jan 2008 08:00:00 UT CRC Industries UK Ltd http://www.manufacturingtalk.com/news/crn/crn106.html High-pressure, hydraulically balanced, coolant pumps for machine tools reduce maintenance costs because there are no packings, cups, or seals, said the manufacturer. Tue, 15 Jan 2008 08:00:00 UT Monster Swiss http://www.manufacturingtalk.com/news/mww/mww100.html lubrication An aerosol monitor enables continuous reliable recording of statistical data relating to aerosol flow to ensure optimum minimum quantity lubrication when metal cutting, producing chips. Fri, 04 Jan 2008 08:00:00 UT SKF UK http://www.manufacturingtalk.com/news/skf/skf260.html Cutting lubricant has been formulated to increase the productivity of grinding machines working aerospace metals and alloys such as titanium and stainless steel. Mon, 24 Dec 2007 08:00:00 UT Master Chemical Europe http://www.manufacturingtalk.com/news/mas/mas160.html To save diamond abrasive during grinding and lapping, a recovery unit keeps diamond completely dispersed during usage by stirring the slurry with a magnetic spin bar. Thu, 22 Nov 2007 08:00:00 UT Engis (UK) http://www.manufacturingtalk.com/news/eng/eng157.html Found to be ideal for a heavy duty grinding machine an oil mist extraction unit uses centrifugal impaction to collect the oil mist and safely returning oil to the machine's reservoir. Fri, 16 Nov 2007 08:00:00 UT Filtermist International http://www.manufacturingtalk.com/news/fim/fim101.html A permanent filtering net which removes metallic particles from coolants is featured on Spring V, a self-cleaning drum filter which works by vacuum system Mon, 15 Oct 2007 08:00:00 UT Losma UK Division http://www.manufacturingtalk.com/news/lok/lok105.html Compressor maker and subcontracting firm develops and rationalises the number of fluids used such as grinding fluids for washing and machine-cleaning fluids used for cleaning floors. Thu, 30 Aug 2007 08:00:00 UT Master Chemical Europe http://www.manufacturingtalk.com/news/mas/mas159.html With costs of off-site waste water disposal rising, a precision engineering company invested in a system that dramatically reduced the volume of waste water and assists effluent management. Mon, 27 Aug 2007 08:00:00 UT Aqua-save Technologies http://www.manufacturingtalk.com/news/aqs/aqs103.html The use of a water miscible cutting fluid to machine a component in Ti6AL4V titanium increased tool life ifrom 120 min to 150 min and the fluid was not prone to foaming. Tue, 31 Jul 2007 08:00:00 UT Jemtech (UK) http://www.manufacturingtalk.com/news/jeh/jeh101.html Metal working fluids management company assists factories in meeting UK regulations and provides a method by which these systems can be maintained with relative ease. Wed, 18 Jul 2007 08:00:00 UT Jemtech (UK) http://www.manufacturingtalk.com/news/jeh/jeh100.html Having a high sub-micron filtration capability, a system on a boring and reaming machine is removing ferrous micro particles from re-circulated coolants to improve valve seat surface finish. Mon, 16 Jul 2007 08:00:00 UT Eclipse Magnetics http://www.manufacturingtalk.com/news/eli/eli105.html To keep the machining of advanced aerospace alloyed metals cool, Iscar has developed tools that release 360 bar of pressure and it guarantees the cutting fluid arrives in a liquid state. Wed, 27 Jun 2007 08:00:00 UT Iscar Tools http://www.manufacturingtalk.com/news/isc/isc105.html Waste water treatment system, that also processes waste machine tool cutting lubricants, has virtually eradicated the need to dispose of waste water off an engineering company's site. Fri, 15 Jun 2007 08:00:00 UT Aqua-save Technologies http://www.manufacturingtalk.com/news/aqs/aqs101.html Metalworking fluids supplier is able provide a service package, which enables users to meet the new HSE Guidelines for management of metalworking fluids. Mon, 28 May 2007 08:00:00 UT Houghton Plc http://www.manufacturingtalk.com/news/hoh/hoh111.html A cutting fluid originally formulated for the grinding of metals has also proven to be suitable for grinding plastics where accuracy and smooth finish are required. Thu, 26 Apr 2007 08:00:00 UT Master Chemical Europe http://www.manufacturingtalk.com/news/mas/mas158.html A grinding synthetic cutting fluid does not use formaldehyde donor biocide and meets even the most strict health and safety criteria, while offering even better ferrous corrosion protection. Wed, 25 Apr 2007 08:00:00 UT Master Chemical Europe http://www.manufacturingtalk.com/news/mas/mas157.html Swarf suction cleaner is one of a range of modular low noise strong suction cleaners for cleaning up dust particles and granules, as well as swarf and their accompanying coolants and lubricants. Fri, 13 Apr 2007 08:00:00 UT Flextraction http://www.manufacturingtalk.com/news/fxo/fxo106.html An air filter for treating oil mist, micro-mist, vapours, smoke and odours emitted from the majority of metal machining operations offer the highest and guaranteed filtration levels. Wed, 11 Apr 2007 08:00:00 UT Losma UK Division http://www.manufacturingtalk.com/news/lok/lok104.html High and low pressure air filtration units are able to eliminate oil mist and smoke generated by a variety of machine tools and there is a centralised system available too. Wed, 11 Apr 2007 08:00:00 UT Losma UK Division http://www.manufacturingtalk.com/news/lok/lok101.html A range of compact, high efficiency flat bed gravity filters will process between 200 and 1000 litres of oil/min and from 400 to 2000 litres of water-based emulsions/min. Wed, 11 Apr 2007 08:00:00 UT Losma UK Division http://www.manufacturingtalk.com/news/lok/lok102.html A drum filter for cutting coolant liquids is a self-cleaning filter and is particularly ideal for work that involves the removal of metal fines produced using machine tools, abrasives and washing. Wed, 11 Apr 2007 08:00:00 UT Losma UK Division http://www.manufacturingtalk.com/news/lok/lok103.html A survey conducted by The Fluid Power Research centre, found that there is wide use of make-up oil additions not meeting manufacturer's contamination guidelines Mon, 02 Apr 2007 08:00:00 UT Glanon International http://www.manufacturingtalk.com/news/gla/gla103.html Glanon International is a manufacturer of Portable Filtration Systems for Industrial Oil and Coolant, all Glanon Filter-Carts are user friendly tools that make Industrial Fluid Recycling easy. Mon, 02 Apr 2007 08:00:00 UT Glanon International http://www.manufacturingtalk.com/news/gla/gla102.html Fully protected against aluminium staining, a long-life coolant ideal for machining aerospace alloys as well as titanium, steel and cast iron and remains clean and stable in the hardest of waters. Fri, 30 Mar 2007 08:00:00 UT Houghton Plc http://www.manufacturingtalk.com/news/hoh/hoh109.html Recent refinements to minimal quantity lubrications systems further benefits to metal machining operations by controling precisely the temperature of the oil arriving at the cutting point. Wed, 28 Mar 2007 08:00:00 UT Bielomatik http://www.manufacturingtalk.com/news/biv/biv102.html