http://www.manufacturingtalk.com/indexes/categorybrowsedu.html Tooling materials and inserts latest news on Manufacturingtalk en-gb Copyright (C)2008 Pro-Talk Ltd. All rights reserved. Fri, 05 Sep 2008 08:00:00 UT Fri, 05 Sep 2008 08:00:00 UT http://www.pro-talk.com/images/protalklogo90.gif http://www.pro-talk.com/ 90 79 LMT (UK) has announced that a range of submicron and ultra-fine grain hardmetal rods and blanks produced at LMT's Boehlerit division in Austria is now available. Mon, 01 Sep 2008 08:00:00 UT LMT Fette http://www.manufacturingtalk.com/news/lmt/lmt119.html During the UK's MACH 2008 show, visitors to the LMT Fette stand can buy 30 inserts in one grade and in one chip breaker geometry for just GBP 75.00 - a saving of up to GBP 130. Tue, 12 Feb 2008 08:00:00 UT LMT Fette http://www.manufacturingtalk.com/news/lmt/lmt109.html Inserts used in a variety of operations regularly achieves up to 75% more components per edge than competitor products owing to a high resistance to flank wear, cratering and thermal cracking. Mon, 24 Dec 2007 08:00:00 UT Walter GB http://www.manufacturingtalk.com/news/wal/wal228.html Inserts use the latest in sintering technology to improve metal cutting performance and reduce costs in applications involving aluminium and other light alloys. Wed, 31 Oct 2007 08:00:00 UT WNT (UK) http://www.manufacturingtalk.com/news/wnt/wnt188.html The addition of aluminium and oxygen to the conventional silicon nitride matrix has produced the hardest and most wear resistant metal cutting insert grade available, said a tooling manufacturer. Tue, 30 Oct 2007 08:00:00 UT Ceratizit UK http://www.manufacturingtalk.com/news/ceh/ceh112.html Aiming to improve metal cutting productivity, profitability and performance, a range of tools and inserts feature tungsten carbide grades for drilling, milling, turning and grooving. Mon, 29 Oct 2007 08:00:00 UT Iscar Tools http://www.manufacturingtalk.com/news/isc/isc107.html A tungsten carbide-based component coating drammatically extends component life and reduces downtime by increasing wear and corrosion resistance. Mon, 10 Sep 2007 08:00:00 UT Hardide Coatings http://www.manufacturingtalk.com/news/hca/hca114.html A range of ball nose and toroidal indexable milling inserts have integrated cooling flutes for through the tool air supply to provide more efficient chip evacuation. Tue, 21 Aug 2007 08:00:00 UT LMT Fette http://www.manufacturingtalk.com/news/lmt/lmt104.html Milling tool developments to be seen at EMO 2007 include a six-sided insert for very high speed machining and double sided inserts with an extremely secure screw clamping system. Mon, 23 Jul 2007 08:00:00 UT TaeguTec UK http://www.manufacturingtalk.com/news/tae/tae150.html Developed to provide exceptional wear resistance and improved adhesion resistance for general steel machining operations, two Cermet insert grades raise cutting speeds. Tue, 26 Jun 2007 08:00:00 UT NTK Cutting Tools http://www.manufacturingtalk.com/news/ntk/ntk108.html Round ceramic tooling inserts perform tough machining, profiling and pocketing in heat resistant super alloys and also reduce component burr and improve component quality. Thu, 24 May 2007 08:00:00 UT Sandvik Coromant UK http://www.manufacturingtalk.com/news/san/san160.html Upgraded cutting insert grades have CVD and PVD coatings that provide an extremely smooth outer TiN coating layer for reducing friction when machining steels, stainless steels and steel alloys. Mon, 16 Apr 2007 08:00:00 UT TaeguTec UK http://www.manufacturingtalk.com/news/tae/tae144.html A competitive ceramic grade for machining gray cast iron can be used for finishing and roughing cuts with higher cutting speeds, in smooth and slightly interrupted cuts. Wed, 07 Mar 2007 08:00:00 UT Kennametal UK http://www.manufacturingtalk.com/news/ken/ken177.html Following over 18 months of close co-operation to engineer and test a way of increasing wear resistance of downhole tractor tool grippers, Hardide Coatings has secured coating facility orders. Tue, 20 Feb 2007 08:00:00 UT Hardide Coatings http://www.manufacturingtalk.com/news/hca/hca111.html To further develop and promote 'intelligent' metalcutting alternatives, Ceratizit has opened a centre of excellence for ultra-hard cutting materials in Luxembourg. Fri, 15 Dec 2006 08:00:00 UT Ceratizit UK http://www.manufacturingtalk.com/news/ceh/ceh108.html Silicone nitride ceramic tooling insert grade delivers exceptional performance for cast iron machining including heavy roughing operations. Wed, 13 Dec 2006 08:00:00 UT NTK Cutting Tools http://www.manufacturingtalk.com/news/ntk/ntk107.html Hardide, the provider of unique surface engineering technology, has announced its preliminary results which cover trading for the year ended on 30 September 2006. Wed, 06 Dec 2006 08:00:00 UT Hardide Coatings http://www.manufacturingtalk.com/news/hca/hca110.html Chamfering is no longer a necessity for CBN cutting tools, says William Shaffer, in most cutting tool applications, has been proven to limit tool life and diminish cutting performance. Thu, 16 Nov 2006 08:00:00 UT Weiler Corporation http://www.manufacturingtalk.com/news/wee/wee113.html Among the latest cutting tool introductions are ranges of positive and negative geometries, inserts designed for parting and grooving and for specialist operations such as bar peeling. Tue, 14 Nov 2006 08:00:00 UT Sandvik Coromant UK http://www.manufacturingtalk.com/news/san/san153.html Greatly improved results in the machining of cast irons are offered by insert grades having improved toughness and wear resistance for many operations. Tue, 14 Nov 2006 08:00:00 UT Sandvik Coromant UK http://www.manufacturingtalk.com/news/san/san154.html Hardide Coatings has opened its first US coatings facility in Northwest Houston, Texas. Mon, 16 Oct 2006 08:00:00 UT Hardide Coatings http://www.manufacturingtalk.com/news/hca/hca108.html A range of inserts aimed at machining aluminium, titanium and other light alloys can achieve around 90% of ground insert's performance but at a cost saving that can be as high as 40%. Thu, 21 Sep 2006 08:00:00 UT WNT (UK) http://www.manufacturingtalk.com/news/wnt/wnt154.html A revolutionary way of producing longer life tooling insert coatings that utilizes new process methods and crystallographic control to manipulate the coating at the atomic level. Tue, 12 Sep 2006 08:00:00 UT Seco Tools (UK) http://www.manufacturingtalk.com/news/sed/sed104.html Designed to generate low cutting forces and to allow for high feed rates a groove in a crown-shaped chipbreaker is optimized for medium/finishing associated with near net machining. Tue, 12 Sep 2006 08:00:00 UT Seco Tools (UK) http://www.manufacturingtalk.com/news/sed/sed107.html PVD coated grade inserts - with very high resistance to crack propagation - for drilling and grooving applications, bring increases in feeds and speeds to give productivity gains of up to 30%. Fri, 25 Aug 2006 08:00:00 UT Kennametal UK http://www.manufacturingtalk.com/news/ken/ken167.html Modern approach to turning hip joints using round inserts that optimize the roughing when machining castings enable superior quality finish and improve reliability for medical industry. Mon, 14 Aug 2006 08:00:00 UT Sandvik Coromant Company (US) http://www.manufacturingtalk.com/news/syg/syg102.html