Latest news on Manufacturingtalk categorised by product type
Adhesives and adhesive bonding equipment
Archive page 8 of 9
Our RSS feed for Adhesives and adhesive bonding equipment press releases
Aluminium and metals filled adhesives are stable
Polyester based, two part, room temperature cured adhesives are filled with aluminium, minerals or steel and have good chemical stability and a long term use temperature range.
News from Inseto (UK), Adhesives Division (26 March 2004)
Airbag wraps production to be doubled
Advanced Label Technologies is doubling current capacity and improves production flexibility in state-of-the-art airbag wraps specifically targeting the automotive safety market.
News from Sentega Holding bv (23 March 2004)
UV cured adhesives offer excellent stability
Ultra violet light cured adhesives for glass products offer excellent stability against ageing from sunlight and high transparency and are supplied with low, medium or high viscosity.
News from Inseto (UK), Adhesives Division ( 3 February 2004)
Adhesives offer high strength, high gap bridging
Epoxy and polyurethane adhesives offer high strength, high gap bridging, good corrosion resistance and reduced weight for fabricating wind turbine components.
News from Inseto (UK), Adhesives Division ( 3 February 2004)
Adhesives improve ferrite core production times
User application article The high strength, fast curing and initial strength achievable within seconds make anaerobic adhesives ideal for magnet and coil winding industries.
News from Inseto (UK), Adhesives Division ( 3 February 2004)
Adhesive maintains carbon fibre boat challenge
User application article September in Milan; the Danish rowing team won a gold medal at a World Rowing Championship event in their carbon fibre racing boat bonded using a 2 part toughened acrylic structural adhesive.
News from Bondmaster ( 4 November 2003)
Cure monitoring - report is now available
Cure monitoring techniques can prevent wastage due to failure of resin to react, use of incorrect proportions of resin components, poor mixing of resin, or incorrect processing conditions.
News from Rapra Technology ( 3 October 2003)
UV light cured adhesives bond instantly
UV cured adhesives are solvent free, single part products that offer near instantaneous curing on demand and so speed up bonding processes or potting and sealing applications.
News from Bondmaster (15 September 2003)
Multiphase toughening produces very tough adhesive
Exploiting the emerging technology of multiphase toughening has led to the development and patenting of a two-part epoxy adhesive that exhibits he highest fracture energy in its class.
News from Bondmaster (11 September 2003)
Powerful adhesives bond 'difficult' materials
Revolutionary methacrylate adhesives are formulated for today's hard to bond engineered plastics, advanced composites, exotic metals and dissimilar substrates.
News from ItW Devcon ( 3 September 2003)
Waterbased acrylic adhesive is conductive
The development of a new, waterbased acrylic conductive adhesive provides a low cost alternative to the more expensive and often cumbersome conductive adhesives.
News from RBC Industries (21 August 2003)
Acrylic adhesive has superfast cure speed
A 2-part toughened acrylic structural adhesive, V5004 combines ultra rapid bonding with structural strength and has excellent flow characteristics and is non-stringing.
News from Bondmaster (18 July 2003)
Structural bonding of polypropylene parts viable
A technique for bonding low surface energy substrates such as polypropylene uses a combination of air-plasma surface treatment and a flexible epoxy adhesive.
News from Bondmaster (29 May 2003)
Tough adhesive holds composite GRP bridge together
Chosen due to its superior bond strength, curing speed and proven durability, an adhesive is structurally bonding the GRP sections of a novel composite bridge.
News from Bondmaster (25 April 2003)
Silicone adhesives, sealants processed faster
Fast room temperature and self bonding potting compounds and silicone gels offer processing times of less than 2 hours without heat.
News from Intek Adhesives (14 April 2003)
Four adhesives designed for composites bonding
Designed for composites bonding applications, four adhesives products include structural acrylics, a patented high peel strength type and one for laminating dissimilar materials.
News from Bondmaster (28 March 2003)
Superior peel strengths for bonding composites
Adhesive bonds have traditionally been strong in shear but weak in peel strength, now an adhesive achieves peel strengths on composite and aluminium substrates superior to any other in its class.
News from Bondmaster (12 February 2003)
Adhesive bond has to put up with a grilling
User application article As well as being able to cope with varied weather conditions an adhesively bonded joint in a front radiator grill and engine hood assembly had to be able to withstand 80degC during the paint cycle.
News from Huntsman Advanced Materials (12 February 2003)
Improving paint and bond adhesion strengths
Significantly enhanced adhesion strength and durability for both painting and bonding are the benefits of a technology that can be integrated into existing manufacturing facilities.
News from BHR Group (28 January 2003)
Adhesives provide freedom of choice
Air conditioning units benefit from the use of adhesive bonding to join a variety of metal and non-metallic materials.
News from Bondmaster ( 2 December 2002)
Earlier news from this category...
Latest news from this category...
