Latest news on Manufacturingtalk categorised by product type
Thermal processing equipment (drying, curing, etc)
Archive page 1 of 3
Our RSS feed for Thermal processing equipment (drying, curing, etc) press releases
Cold compressed air is economical cooling
Cold compressed air is an efficient and economical cooling medium for many production facilities, including the blow moulding process requires consistent product quality in the fastest time. Brochure available
News from Beko Technologies (21 September 2006)
Radiometer monitors ultra-violet curing
Radiometer fits all three types of UV curing systems and is ideal for all types of industrial use and its photo-sensor is protected from any UV spot lamps' high temperatures.
News from Intertronics (28 August 2006)
Economic temperature ovens heat or dry
A range of economic temperature ovens perform a wide range of rolls from high temperature tests and drying to heat treatment in production lines as well as many other uses.
News from Unitemp (25 August 2006)
High-spec ovens boost sintering capacity
Two high-specification ovens have been installed by a specialist sealing solution provider to increase the capacity and consistency of a raw material sintering operation. Brochure available
News from Carbolite (Barloworld Scientific) (27 July 2006)
Induction heating serves automated brazing
An efficient induction heating system is designed for automated industrial brazing and soldering and has energy-efficient power supplies and a four- or six-position indexing table.
News from Induction Atmospheres (24 July 2006)
Faster furnaces combine radiation, microwaves
Furnaces that combine radiant and microwave heating produce faster processing rates than radiant- and microwave-only types, and reduce energy usage, throughput times and emissions. Brochure available
News from Carbolite (Barloworld Scientific) (28 June 2006)
Conveyor oven cures plastics sheets' coating
An electrically-heated, 250 deg F (120 deg C) two-zone belt conveyor oven is currently used to cure a coating onto plastics sheets at the customer's facility.
News from Grieve Corporation (19 June 2006)
Repeat kiln orders for fast ceramic turnaround
Following the company's participation in Ceramitec 2006, DragonandTCKilns said it signed a new kiln order agreement on the stand.
News from Dragon Kilns (12 June 2006)
Ceramics kilns feature automatic handling
PLC based systems, quality refractories and fully automatic handling feature gas, oil and LPG tunnel and shuttle kilns, as well as gas and electric roller types and gas and electric test kilns.
News from Dragon Kilns (20 April 2006)
Corona treatment avoids syringe leakages
Unit is designed to corona treat plastics needle hubs for hypodermic syringes to avoid bonding and leakage problems experienced by many medical device manufacturers.
News from Dyne Technology Ltd (11 April 2006)
Testing inks measure materials' surface energy
A 'testing ink kit' is used for measuring the surface energy of untreated or treated materials contains, as standard, a range of six different test inks 36, 40, 44, 48, 50 and 56 Dynes (mN/m).
News from Dyne Technology Ltd (31 March 2006)
Corona discharge generator pretreats for coating
A high-voltage, high-frequency corona discharge generator treats the surface of 3D moulded or extruded plastics parts, profiles, pipes and cables before to coating or printing.
News from Dyne Technology Ltd (21 March 2006)
Corona improves bonding properties of adhesives
User application article By increasing the surface tension on catheter tubing, corona treatment improves the bonding properties of adhesives and coatings - thereby adding extra safety and reliability.
News from Dyne Technology Ltd (14 March 2006)
Corona and plasma treatment Web site launched
Corona and plasma treatment equipment supplier has launched a Web site ito enable companies to find the right equipment for improved bonding of printing inks, paints, adhesives, etc.
News from Dyne Technology Ltd (14 March 2006)
Flood lamp cures UV materials rapidly
High intensity UV flood lamp for rapid curing of UV materials is compact, light weight and has an integral cooling system to ensure low casing temperature and optimal UV bulb operating conditions.
News from UV Light Technology ( 1 March 2006)
Air drying system brochure updated
Loose-leaf brochure for drying systems comprises an up-dated set of data sheets for fans, blowers, airknives, bottle/can drying lines together with a CD that provides an overview of drying technology. Brochure available
News from Air Control Industries ( 4 January 2006)
Thermal rig puts brake systems to the test
User application article AP Braking has expanded and upgraded its R and D facilities with the installation of a specially modified Carbolite thermal chamber suitable for long-term test programmes involving flammable liquids. Brochure available
News from Carbolite (Barloworld Scientific) (16 December 2005)
Over 400 ovens, furnaces catalogued
Over 400 standard ovens and furnaces, with temperatures to 2700 deg F - and customised heat processing systems for laboratory or production usage - are described in an updated catalogue.
News from Grieve Corporation (12 December 2005)
Three furnaces upgrade instrument making
User application article Installation of three custom-built furnaces has upgraded and expanded production facilities for a specialist manufacturer of radio-frequency, microwave and sensing components. Brochure available
News from Carbolite (Barloworld Scientific) ( 5 December 2005)
Infra-red heating system warms tyres
User application article An infra-red heating system using emitters from Heraeus Noblelight, is helping to ensure that some tyres in the A1 Grand Prix are at their optimum operating temperature at the start of every race.
News from Heraeus Noblelight, I-R Division (30 November 2005)
Earlier news from this category...
Latest news from this category...
