Air compressors
(a sub category of Manufacturing support)
A - Z list of suppliers
Click on a letter below to find a supplier...
Latest articles from 'Air compressors'
News releases from this sub-category
Showing 1-25 of 120 articles
Beko offers compressed-air testing for body shops
The service department of Beko Technologies, a compressed-air specialist, has recently started working in the body shop/refinishing industry sector.
News from Beko Technologies, Jun 29, 2009
Polaris compressors offer oil-free compressed air
Boge Compressors has launched the Polaris range of industrial oil-free turbo compressors.
News from Boge Compressors, Jun 22, 2009
Boge CL series compressors available up to 15kW
Boge Compressors has extended the CL series with the introduction of 7.5, 11 and 15kW models.
News from Boge Compressors, Jun 17, 2009
Heat-recovery system optimises compressors
David Burton, general manager of Boge Compressors, has discussed how compressed-air users can optimise their compressed-air related energy usages through heat recovery.
News from Boge Compressors, Jun 11, 2009
Rhoss chiller unit utilises ABB AC drive
A chiller unit utilising a scroll compressor and ABB standard drive is set to generate 15 per cent lower energy consumption than models with a traditional compressor design.
News from ABB Automation, Jun 11, 2009
Boge screw compressor reduces energy costs
RSL Steeper has reduced its compressed-air energy costs by 45 per cent through replacing an ageing compressor with a Boge S15 screw compressor at its manufacturing facility in Leeds.
News from Boge Compressors, May 18, 2009
Atlas controls reduce compressed-air costs
Atlas Copco Compressors has introduced the next generation in compressor controls across its oil-injected screw compressor range 11-90 kW GA/GA+/GA VSD.
News from Atlas Copco Compressors, May 11, 2009
Atlas Copco upgrades compressed air system
An upgrade programme at Knauf Insulation's facility at Queensferry has replaced/upgraded all parts of the production line, including the plant's compressed air system.
News from Atlas Copco Compressors, May 7, 2009
Boge releases energy optimisation system
Boge has launched the Airtelligence Provis energy optimisation system.
News from Boge Compressors, Apr 8, 2009
Karl Uhl uses Beko Drypoint AC adsorption dryers
Karl Uhl in Bochum, Germany, has used the special dryer technology of Beko Technologies for its cold-regenerated adsorption dryers.
News from Beko Technologies, Mar 30, 2009
Atlas examines benefits of oil-free compressed air
Atlas Copco discussed Class 0 and oil-free air in a seminar delivered at Process Engineering Live last week.
News from Atlas Copco Compressors, Mar 23, 2009
Boge estimates potential energy savings
Boge has developed a free online energy survey to help companies estimate how and where potential energy savings can be made within their compressed air system.
News from Boge Compressors, Mar 18, 2009
Oil-water separator treats stable emulsions
Atlas Copco Compressors has introduced an oil-water separator that uses a filtration method to treat stable emulsion and prevent bacterial growth in the compressor condensate.
News from Atlas Copco Compressors, Mar 3, 2009
Thorite compressors power packaging processes
Thorite has installed the latest HPC compressor systems at Gateshead-based flexible packaging specialist Scholle Europe.
News from Thorite, Jan 21, 2009
Boge supplies CL 3 screw compressors to Komori
Komori has chosen Boge CL 3 screw compressors for use in small format printing machinery.
News from Boge Compressors, Jan 12, 2009
Sullair introduces Shoptek air compressors
Sullair has announced the Shoptek series of lubricated rotary screw air compressors.
News from Sullair Corporation, Jan 8, 2009
Hollow bar takes compressed air to sub building
Teseo has provided its modular aluminium hollow bar system to deliver compressed air to BAE Systems' Astute Class nuclear submarine production line at Barrow-in-Furness.
News from Teseo UK, Dec 16, 2008
Boge assists in quality manufacturing
A manufacturer of contemporary TV stands has opted for a Boge SD15 screw compressor to provide a reliable, quiet and compact compressed air solution to its manufacturing site in Bradford.
News from Boge Compressors, Dec 10, 2008
Wilkinson unveils Fiac piston air compressor
Wilkinson Star has launched Fiac's SCS400/200 low-noise, belt-driven, piston air compressor, powered by a single-phase, 230V heavy-duty electric motor.
News from Wilkinson Star, Dec 8, 2008
Gast Group publishes overview brochure
The Gast Group has produced a European full-line overview brochure for its range of air compressors and vacuum pumps.
News from Gast Group, Nov 26, 2008
LF and LFx compressors gain Class Zero certificate
Atlas Copco Compressors has extended its oil-free Class Zero certification to include the heavy duty LF and LFx family of piston compressors.
News from Atlas Copco Compressors, Nov 25, 2008
Atlas Copco upgrades GA air compressors
Atlas Copco has redesigned and upgraded its fixed-speed compressor, the GA 11+-30 and the variable speed version, the GA 15-30 VSD.
News from Atlas Copco Compressors, Nov 17, 2008
Boge and FS-Elliott to supply Turbo compressors
Boge has announced a strategic alliance with FS-Elliott to deliver its range of Turbo compressors exclusively throughout Europe.
News from Boge Compressors, Nov 14, 2008
Atlas Copco offers seven-year warranty
Atlas Copco Compressors has introduced a seven-year warranty to provide its customers with peace of mind.
News from Atlas Copco Compressors, Oct 29, 2008
Boge cuts energy costs at Victor Manufacturing
Victor Manufacturing has realised 48 per cent energy savings per annum on its compressed-air-related energy costs by installing an energy-efficient Boge SLF40 frequency controlled screw compressor.
News from Boge Compressors, Oct 22, 2008
Not what you're looking for? Search the site.
Featured articles
-
Polaris compressors offer oil-free compressed air
Boge Compressors has launched the Polaris range of industrial oil-free turbo compressors.
-
Boge CL series compressors available up to 15kW
Boge Compressors has extended the CL series with the introduction of 7.5, 11 and 15kW models.
Articles by product category
-
Machine Tools: Cutting (4,202)
- Machine Tools: Cutting (6)
- CNC lathes (281)
- CNC turning centres, mill/turning, multi-tasking centres, horizontal and VTLs. (350)
- CNC automatic lathes (292)
- Machining centres - all types (157)
- Horizontal machining centres (HMC) (154)
- Vertical machining centres (VMC) (330)
- 5-axis (3+2 axes and continuous path) machining centres (152)
- Flexible machining cells and systems (FMS) (84)
- Manual lathes and manual/CNC (combination or half-NC) lathes (35)
- Milling, boring and routing machines - manual and CNC (140)
- Abrasive machining - manual and CNC machines (224)
- Drilling machines and drill/tap centres (50)
- Pick-up spindle turning, multi-tasking, turning and machining centres (46)
- Honing, polishing, burnishing and lapping (33)
- Rotary and linear transfer machines (48)
- Sawing and cutting-off machines and automation systems (125)
- Large milling and boring machines (over 2000mm in X) (84)
- Miscellaneous machine tools, gear cutting machines and equipment (103)
- Control systems, DROs, etc, for machine tools (270)
- CAM, software, off-line programming, for metal cutting machine tools (747)
- Miscellaneous machine tool equipment (fixtures, rotary tables etc.) (164)
- Bar feeders, loaders and parts catchers (57)
- Micro- and nano-machining (30)
- Portable power tools (128)
- Machine spindles and spindle attachments (31)
- Probes, sensors, tool detection, calibration for machine tools (81)
-
Machine Tools: Metalforming, shearing, folding and punching (1,656)
- Machine Tools: Metalforming, shearing, folding and punching (3)
- Power presses, mechanical (48)
- Power presses, hydraulic (51)
- Forging presses, hammers and screw presses (7)
- CNC punching and profiling (187)
- CNC plasma-arc and oxy-fuel gas cutting/profiling machines (84)
- CNC laser cutting and profiling machines (166)
- CNC water jet cutting and profiling machines (139)
- Guillotines, shears, circling and notching machines (8)
- Structural bending machines & steelworkers (13)
- CNC laser machining, engaving and welding (22)
- Pressbrakes and folding machines (85)
- Press tools - design, manufacture and usage, CAD/CAM, software (66)
- Forming, swaging and extrusion machines (8)
- Cold roll forming systems and software (13)
- Special purpose presses and equipment (58)
- Jigs, fixtures, special tooling and gauging (9)
- Control systems for metalforming machines and equipment (24)
- Press shop and sheet metal working automation, slitting, shearing (99)
- EDM diesinking (64)
- EDM wire cutting (131)
- EDM wire and diesinking, ECM, miscellaneous equipment (26)
- CAM and software for sheetmetal, punching, profiling, EDM, etc (146)
- Tubeworking: bending, cutting-off, profiling and end working (87)
- Miscellaneous metal forming machines (wire, canning,etc) and equipment (19)
- Metalforming lubricants (48)
- Laser and high energy beams - machining, forming, processing (45)
-
Machine Tools: moulding (1,180)
- Machine Tools: moulding (1)
- Injection moulding (201)
- Blow moulding (16)
- Extrusion machines (39)
- Second operation equipment (15)
- Profiling, trimming, routing and drilling (13)
- Joining and bonding (21)
- Handling and automation equipment (88)
- Mould and die making, machining, CAD/CAM, software (262)
- Rapid prototyping/manufacturing machines, systems, equipment (173)
- Diecasting machines and equipment (32)
- Moulding materials (231)
- Diecasting materials (4)
- Metals foundry, materials and equipment (52)
- Sub-contract plastics machining services (3)
- Special purpose moulding machines and systems (29)
-
Cutting tools (1,975)
- Cutting tools (12)
- Turning tools (182)
- Milling cutters (324)
- Drilling, boring and reaming (145)
- Tapping, chasing and thread rolling tools, attachments (10)
- Special purpose and multi-function tooling, broaching, etc. (78)
- Tool and cutter grinding (139)
- Tool and cutter manufacturing (23)
- Abrasive grinding wheels, abrasives (79)
- Honing, lapping and burnishing (8)
- Saw blades (10)
- Circular saws and abrasive discs (3)
- Tool identification and handling (16)
- Tool management systems, handling and software (50)
- Tool and cutter pre-setting (34)
- Tooling services (10)
- Toolholders (104)
- Swarf management equipment (6)
- Threading tools (55)
- Workholding - miscellaneous clamping systems, components (221)
- Cutting lubricants, coolants, systems and treatment (221)
- Tooling materials and inserts (75)
- Chucks and collets for rotational work (94)
- Vices, chucks, towers, pillars, cubes, tombstones - prismatic work (76)
-
Welding and Joining (1,596)
- Welding and Joining (2)
- Resistance welding equipment (47)
- Arc welding equipment, manual and automatic (340)
- Automatic and robotic welding systems (199)
- Mechanical fasteners, fixing and joining, and equipment (302)
- Adhesives and adhesive bonding equipment (232)
- Special purpose joining equipment (33)
- Handling and automation equipment (7)
- Non-destructive testing equipment (20)
- Seam-tracking, guidance systems (21)
- Welding ancilliaries (177)
- Laser and electron beam welding (96)
- Thermal and weld hardfacing, coating and overlaying (9)
- arc-air gouging, lancing equipment (11)
- Weld preparation equipment (14)
- Manual oxy-fuel gas cutting, welding, brazing soldering and cutting (27)
- Manual plasma-arc cutting equipment (8)
- Welding consumables, rods, wires, fluxes, powders (34)
-
Finishing, preparation, coating and painting (1,149)
- Finishing, preparation, coating and painting (3)
- Deburring, de-flashing and fettling (143)
- Washing and pretreatment (160)
- Heat treatment, furnaces, quenching media (10)
- Plating and plating systems (61)
- Coatings and coating systems (144)
- Paint and painting systems (66)
- Polishing, buffing and surface texturing (46)
- Integrated systems (11)
- Quality control (6)
- Cleaning media and cleaning systems (360)
- Sealing equipment (13)
- Metals heat treatment, mechanical stress relieving (21)
- Thermal processing equipment (drying, curing, etc) (105)
-
Automation, assembly systems and computer systems (1,297)
- Automation, assembly systems and computer systems (4)
- System integration services (69)
- Automation and assembly systems (78)
- Automation and assembly equipment (266)
- Consultants (automation systems) (3)
- Control systems, panels, HMIs, interfaces, screens (465)
- Industrial computers, PCs, PLCs, notebooks, etc. (268)
- Automation, control software (144)
-
Manufacturing support (9,149)
- Manufacturing support (9)
- Robots and robotic systems (392)
- Actuators, motion systems, etc (347)
- Gantries, manipulators and positioners/positioning tables (47)
- Positioning stages - linear, rotary, multi-axis (70)
- Air compressors (120)
- Airline equipment, filters, drains and traps, control systems, etc. (145)
- Monitoring and sensor equipment and systems (1,479)
- Electrical systems (995)
- Plant services equipment, filters, filtration systems, etc (425)
- Industrial gases and associated equipment (101)
- Pumps and valves (242)
- Maintenance planning, services and equipment (409)
- Drives, motors and power transmission, couplings, clutches (1,489)
- Lubrication - lubricants and lubrication systems (166)
- Laser marking systems (149)
- Pneumatic equipment (341)
- Seals, gaskets, bushes, etc (117)
- Hydraulic equipment and fluids (155)
- Hand tools - wrenches, etc. (25)
- Component marking, printing and labelling systems (non-laser) (216)
- Bearings and guideways - rotary and linear (299)
- Dispensing, filling and weighing systems (269)
- Machine and production line ancillaries, miscellaneous equipment (467)
- Metals and materials, stockholding (187)
- Benches, work stations, platforms, lifts, parts storage and cabinets (74)
-
Industry news, commerce, exhibitions, education (8,508)
- Industry news, commerce, exhibitions, education (5)
- Manufacturing industry news (2,403)
- Manufacturing orders, contracts, financial reports (1,193)
- People in Manufacturing (1,018)
- Manufacturing dealerships, agencies and acquisitions (1,578)
- Manufacturing conferences and exhibitions (329)
- Manufacturing seminars and workshops (225)
- In-house manufacturing exhibitions, Open Days, Roadshows, events (164)
- Industrial and management training courses (280)
- Manufacturing exhibitions (323)
- Industrial consultancy services (430)
- Industrial Development Agencies and services (74)
- Professional Associations, Institutions, Institutes, Standards bodies (322)
- Research and development, technical centres, universities (100)
- Manufacturing finance: production investment support (54)
- Manufacturing finance: insurance services (10)
-
Packaging (2,891)
- Packaging (4)
- Adhesives and tapes materials, equipment and services (25)
- Bags and bagmaking materials, equipment and services (79)
- Bottles, bottling and jars materials, equipment and services (181)
- Boxes and cases materials, equipment and services (44)
- Bulk containers materials, equipment and services (28)
- Cans, canning and tins materials, equipment and services (22)
- Carton converting materials, equipment and services (26)
- Closures, fasteners and dispensers materials, equipment and services (92)
- Coding and marking materials, equipment and services (98)
- Contract packing (19)
- Control and inspection equipment and services (74)
- Conveying, handling and end-of-line equipment (293)
- Filling, filling equipment and services (42)
- Film materials, equipment and services (101)
- Food Packaging (179)
- General packaging materials, equipment and services (857)
- Label converting and sleeving materials, equipment and services (156)
- Packaging management software (36)
- Packaging design materials, equipment and services (37)
- Pharmaceutical and medical packaging (56)
- Printing materials, equipment and services (196)
- Packaging trade organisations (51)
- Weighing and counting equipment (112)
- Packaging exhibitions, conferences and seminars (76)
- Anticounterfeiting technology (5)
-
Specialist Manufacturing Sectors and Metals Producing (1,409)
- Metals processing plant and equipment (142)
- Rolling mills and equipment (99)
- Metals finishing lines and equipment (33)
- Motor sports manufacturing: machining, software, CAM (69)
- Motor sports manufacturing: fabrication and assembly (39)
- Motor sports manufacturing: specialist coating and finishing (4)
- Food and drink manufacturing: processing equipment (292)
- Food and drink manufacturing: packaging and bottling equipment (177)
- Pharmaceutical/medical manufacturing: production equipment (64)
- Pharmaceutical manufacturing: handling and packaging equipment (48)
- Pharmaceutical manufacturing: production software (4)
- Cosmetics manufacturing: packaging and dispensing (3)
- Electronics manufacturing: equipment, automation, software (265)
- Electronics manufacturing: quality control equipment, software (117)
- Books, CDs and Videos (214)
-
IT for manufacturing management and production (4,076)
- IT for manufacturing management and production (19)
- Production costing, job estimating and quotations software (69)
- Business management systems, including SCADA, assets, projects, CRM (401)
- Supply chain management and software (146)
- Enterprise Resource Planning software (ERP) (743)
- Manufacturing Resource Planning software (MRP) (54)
- Factory data acquisition (non-RFID), data logging (318)
- Warehouse and logistics management software (49)
- Production, shopfloor planning, control and scheduling software (144)
- Work-in-progress tracking software (46)
- Lean Manufacturing (42)
- RFID systems, wireless hardware and software (263)
- EDI - electronic data interchange and software (8)
- Document and workflow management (198)
- Industrial networking and communications (353)
- CAD systems, CAD translation and solid modelling for production (174)
- Analysis, simulation and mathematical software for production (153)
- Scanners, imagers for reading codes, bar codes, labels, etc. (22)
- Product life cycle management (PLM) (121)
-
IT for engineering, industrial and commercial applications (2,726)
- IT for engineering, industrial and commercial applications (11)
- Manufacturing IT Platforms (68)
- Programming aids and applications (352)
- Training Aids and eCommunication (485)
- HR, Payroll, Time and Attendance software (47)
- Data acquisition software and systems (146)
- Manufacturing Information Technology systems (356)
- Used machinery and machine tools (37)
-
Materials handling and storage (1,043)
- Materials handling and storage (9)
- Standard fork lift trucks and attachments (104)
- Stacking and picking, aisle trucks, tower trucks, container trucks (62)
- Other lifting, loading and elevating equipment (80)
- Automated handling systems, AGVs, integrated handling systems (39)
- Cranes, hoists, winches, chains and ancillaries (106)
- Conveyor systems (production and general purpose) (243)
- Specialist and bespoke handling equipment and services (46)
- Storage hardware and storage and racking systems (85)
- Miscellaneous equipment, batteries, battery charging systems, etc (45)
- Tugs, tractors, trucks, pushers, jacks, trollies, skips, etc. (64)
- Storage and handling services, consultancy, associations (22)
- Weighbridges, weighing systems (3)
- Loading dock and yard handling equipment (51)
- Logistics and freight transport (84)
- Wood and non-metallics working (79)
-
Metrology instruments and systems (3,892)
- Metrology instruments and systems (3)
- Gauging and Hand Tools for Inspection (159)
- Calibration Instruments (345)
- Non-contact, Optical, X-ray and Laser measurement systems (731)
- Coordinate measurement arms, systems and software (106)
- Surface, Profile and Topology systems (41)
- Measurement and Quality Software and SPC (1,026)
- Metrology standards room equipment (15)
- Production metrology, measuring equipment/systems, DROs (21)
- Coordinate measuring machines (CMM) and software (173)
- Thickness gauging and measurement (23)
- Measurement systems including encoders (261)
- Probes and sensors (332)
- Laser-based systems (49)
- Vision and scanning systems (363)
-
Testing and quality control systems and services (5,264)
- Testing and quality control systems and services (7)
- Electrical and Electronic Testing (906)
- Calibration and Testing Services, Consultancy and Learning (529)
- Materials Testing (2,655)
- Non Destructive Testing (222)
- Inspection and testing (non-metrology), NVH (228)
- Miscellaneous Instruments (141)
- Quality control systems/SPC software (108)
- Torque measurement devices and systems (126)
- Machine vision systems and accessories (325)
- Consultants and services: quality control, assurance (17)
-
Subcontracting services (1,267)
- Subcontracting services (1)
- General machining (209)
- Special purpose machining (47)
- Mould, die and tool making (101)
- Casting, die-casting and forging, hot and cold working (64)
- Sheet metal presswork, stamping and fabrication (187)
- Treatment and finishing (26)
- Electronics and electrical design and manufacture (199)
- Plastics and rubber moulding (100)
- Machine, plant rebuild, overhaul, upgrade and repair (21)
- General subcontracting services (66)
- Heat treatment (12)
- Sheet metals, plate, non-metals cutting and profiling (48)
- Fast prototyping and pattern making services (71)
- Plating and galvanising services (9)
- Machining and assembly (59)
- Gear making and gear systems and related services (7)
- Subcon Exhibition (40)