Latest news on Manufacturingtalk categorised by product type
Monitoring and sensor equipment and systems
Archive page 37 of 67
Our RSS feed for Monitoring and sensor equipment and systems press releases
SS float switches can be customised
Stainless steel float switches with two liquid level switching positions or continuous output 4-20mA - these dual level devices are in lengths from 100mm to 3.5m and can be customised.
News from Crydom Magnetics ( 5 April 2005)
Transmitter uses piezo-resistive pressure sensor
Pressure transmitter uses piezo-resistive pressure sensor characterised by high signal stability and intelligent digital electronics linearise sensor signal and compensates thermal error.
News from UK Instrument and Controls ( 1 April 2005)
Head-mounted temperature transmitters fit any head
Head-mounted temperature transmitters in standard DIN format offer simplified programming and the ability to be retrofitted into any existing temperature head.
News from ABB Automation Technologies (Instrumentation) (30 March 2005)
Management system to eliminate 'nuisance' alarms
Alarm management system provides ABB's System 800xA users with the ability to identify and eliminate nuisance alarms and so operate closer to optimum performance levels. Brochure available
News from Matrikon (28 March 2005)
Lightweight micro-ohm meter checks products
Lightweight, compact, rugged portable Micro-ohmmeter is designed ground bond testing and for inductive loads when making transformers, electric motors and electronic assemblies.
News from Caltest Instruments (21 March 2005)
Dual channel digital controllers are user-friendly
Two six-digit, dual channel controllers for applications involving LVDT-based displacement transducers or VR half-bridge gaging probes are economically priced.
News from Macro Sensors (18 March 2005)
Low cost vision sensor has 1.3m pixel resolution
Vision sensor that uses a 1.3 megapixel imager makes highly detailed automated inspections possible, at about half the cost of comparable vision sensors, says the manufacturer.
News from Banner Engineering (18 March 2005)
Infrared inspection offers unmatched sensitivity
Infrared inspection system that providing unmatched thermal sensitivity of 0.08 deg C detectss and displays see the smallest temperature differences clearly. Brochure available
News from FLIR Systems (17 March 2005)
Transmitters offer low-cost pressure measurement
Pressure transmitters offer low-cost pressure measurement from 6 to 550 bar, use the latest in ASIC technologies and deliver a total typical accuracy of +/-1 % full scale. Brochure available
News from Sensortechnics (14 March 2005)
Modular pressure switches bring flexibility
A modular concept has been used in the design, construction and assembly of compact pressure switches that allows for flexibility in application and specification. Brochure available
News from Barksdale Control Products UK (14 March 2005)
Vapour permeability and transmission rate tested
Water vapour transmission meter provides a quick and simple way to test vapour permeability and transmission rate and can cope with several samples at a time.
News from Versaperm (11 March 2005)
Engine lubricant metal detector has DNV Approval
A metal detector, which prevents engine failures by spotting metal particles in lubricating fluids due to bearing wear or other problems, has received a DNV Type Approval certificate Brochure available
News from AMOT Controls (10 March 2005)
Non contact IR thermometer uses a small target
Non-contacting infra-red pyrometer will measure temperatures of a target spot of only 0.8mm diameter from a distance to 5mm and can be used in hazardous areas. Brochure available
News from Celsum Technologies ( 8 March 2005)
Digital bridge amplifier used with load cells
Digital bridge amplifier is said to be the ideal tool for load cell measurement applications where a digital load cell signal is required from the existing loadcells.
News from Synectic Design ( 7 March 2005)
Flowmeter meets landing gear test rig needs
User application article A high performance flowmeter was found capable of meeting the demands of a landing gear test rig whilst being easily installed on pipework next to existing instrumentation.
News from Katronic Technologies ( 4 March 2005)
Thermographic cameras have professional features
Designed for customers with specific thermographic needs, a 'low end' platform thermovision camera has many features of the higher specified professional types. Brochure available
News from FLIR Systems ( 3 March 2005)
Meter readily and easily checks for vapour
Water vapour transmission meter provides a quick and simple way to check water vapour leaks in seals, mastics, adhesives, gaskets, O-rings and enclosures.
News from Versaperm (25 February 2005)
High accuracy load cells are now affordable
Affordably priced load cells offer linearities of 0.03% with overall accuracies of 0.1% and include 'pancake' style of cell for compression, tension and universal operation. Brochure available
News from RDP Electronics (24 February 2005)
Digital position indicators are well protected
Direct drive Digital Position indicators are housed in a high impact, ultrasonically welded, technopolymer unit for shaft drive position readouts in industrial environments. Brochure available
News from Elesa (UK) (24 February 2005)
Noise monitoring system is fully integrated
User application article General Motors Corporation has selected a fully integrated testing and analysis system to perform pass-by noise certification of newly developed vehicles. Brochure available
News from LMS International (18 February 2005)
Earlier news from this category...
Latest news from this category...
