Latest news on Manufacturingtalk categorised by product type
Thickness gauging and measurement
Our RSS feed for Thickness gauging and measurement press releases
Thickness check cuts product development time
User application article Lumetrics' OptiGauge 'super luminescent' thickness measurement technology has dramatically decreased product development time for polymeric medical implants.
News from Lumetrics (23 June 2008)
Coating thickness instrument is easy to use
An online demonstration has been set up to show how an advanced, hand-held coating thickness instrument is easy to use and how it does everything that a bench-mounted instrument can do. Brochure available
News from Fischer Instrumentation (GB) ( 5 March 2008)
Spectroscopic ellipsometer measures thin film
Mikropack has introduced a compact, easy-to-use, bench-top spectroscopic ellipsometer for thin film measurement.
News from Mikropack (15 December 2006)
Digital coating thickness gauge is low-cost
A low cost, hand-held, digital coating thickness gauge is designed for use on ferrous substrates and includes automatic 'off', mm/inch options and a choice of measuring resolutions.
News from Bowers Metrology UK ( 8 September 2006)
On-line thickness measurement and control systems
With the introduction of TDI (Total Distributed Intelligence), NDC Infrared Engineering has taken the next step forward in the evolution of on-line thickness measurement and control systems.
News from NDC Infrared Engineering ( 9 June 2006)
Ultrasonic system checks tube coatings
Ultrasonic measuring system reliably measures the intact condition of the PVDF barrier layer and the correctness of inner and outer diameters of a three-layer gasoline tube.
News from iNOEX ( 2 August 2005)
Magnetic instruments check coatings quickly
Hand held instruments use either the magnetic induction or the eddy current method to non-destructively measure simple coatings simply and quickly. Brochure available
News from Fischer Instrumentation (GB) ( 2 May 2005)
Check thickness coatings without touching
Hand-held coating thickness instrument uses phase measurements to get better results and does not have to touch the coating surface, such as when checking rough zinc coatings. Brochure available
News from Fischer Instrumentation (GB) (28 April 2005)
NDT gauge measures paint, lacquer thicknesses
An easy to use, affordable gage for non-destructive measurement of coating thickness on wood, concrete and other substrates checks varnish, paint, lacquer and other coatings.
News from DeFelsko Corporation (23 December 2003)
NDT unit checks coating thicknesses on wood
Using ultrasonics a detector non-destructively measures the thickness of powder coatings, lacquers, urethanes and other coatings on wood products.
News from DeFelsko Corporation ( 7 October 2003)
Hand-held measures coating thicknesses
Using a range of modular "smart probes", which store their calibrations, a hand-held device economically measures coatings that may be soft, abrasive or complex. Brochure available
News from Fischer Instrumentation (GB) (10 July 2003)
Analysing up to 24 elements of coating thickness
A new standard of excellence has been achieved with a standard coating thickness X-ray product that can analyse up to 24 elements. Brochure available
News from Fischer Instrumentation (GB) (20 June 2003)
Thickness gauge has larger graphics display
Larger graphics display on a coating thickness gauge features a high contrast backlight and is now capable of presenting full on-screen menus to allow even greater flexibility and simplicity.
News from DeFelsko Corporation (27 March 2003)
Gauge measures wall thickness, corrosion effects
Ideal for measuring wall thickness and the effects of corrosion or erosion on tanks or pipes an ultrasonics thickness gauge can be used on any structure where access is limited to one side.
News from DeFelsko Corporation (18 March 2003)
Plastics thickness gauge is non-conductive
Because they are non-conductive, non-sparking and non-marring, plastics gauge sets are ideal for use in electronic repairs or where finishes could be easily damaged.
News from Precision Brand Products ( 4 February 2003)
Display menus manage thickness gauging
By using display menus to control the use of the many convenient features offered, this coating thickness gauge has revolutionised the measurement of coating thicknesses.
News from Elcometer Instruments (28 November 2002)
Measure thicknesses with one-hand gauge
Mitutoyo's new Series 7 Quick Mini Thickness Gauge, with Digimatic technology, extends the measuring range up to 25mm. Brochure available
News from Mitutoyo ( 9 March 2001)
Earlier news from this category:
