Miscellaneous Instruments
(a sub category of Testing and quality control systems and services)
A - Z list of suppliers
Click on a letter below to find a supplier...
Latest articles from 'Miscellaneous Instruments'
News releases from this sub-category
Showing 1-25 of 141 articles
PI nanopositioning stages deliver accurate motion
Physik Instrumente (PI) has extended its line of piezo stages for super-resolution microscopy with the PI Nano series nanopositioning stages.
News from PI (Physik Instrumente), Jun 25, 2009
Metrohm titrators come with certified installation
Metrohm has announced that all of its instruments come with a three-year warranty, while its titrators also come with certified installation and a service in the first year of ownership.
News from Metrohm UK, Jun 9, 2009
Spraytec can replace cascade-impaction techniques
Catalent Pharma has shown the Malvern Spraytec laser-diffraction based particle-size analyser is a useful alternative to cascade-impaction techniques for routine screening of nebuliser formulations.
News from Malvern Instruments, Jun 9, 2009
Thermo Fisher releases spectral data software
Thermo Fisher Scientific has launched Mass Frontier 6.0: a software package offering sophisticated features for the management, evaluation and interpretation of mass spectra.
News from Thermo Fisher Scientific, Jun 4, 2009
In-line Sealtester for gas-flushed packaging
Sartorius has announced the launch of the FLI Sealtester, designed to perform in-line non-destructive seal testing of gas-flushed bags.
News from Sartorius Mechatronics, Jun 3, 2009
Thermo Fisher to present Exactive LC-MS at Achema
Thermo Fisher Scientific will showcase a portfolio of new instruments, accessories, consumables and software at Achema 2009, to be held in Frankfurt, Germany, from 11-15 May.
News from Thermo Fisher Scientific, Apr 1, 2009
Renesas microcontroller gains USB support
Renesas Technology Europe and its Gold Alliance partner Thesycon have introduced a complete USB stack to support the Renesas Starter Kit (RSK) RSKM16C/6C, based on the M16C/6C.
News from Renesas Technology Europe, Mar 4, 2009
Metrohm publishes 2008/2009 catalogue
Metrohm UK has announced the publication of its general catalogue for 2008/2009.
News from Metrohm UK, Feb 2, 2009
Fusion level measurement system launched by Able
The Able Fusion level measurement system combines the operation of a float-operated magnetic level indicator with a guided wave radar.
News from Able Instruments and Controls, Jan 23, 2009
Sensor provides angular tilt detection
Turck has introduced a dual-axis inclinometer sensor for angular tilt detection.
News from Turck, Nov 6, 2008
MISP techniques improve the Professional IC range
Metrohm released the 850 Professional IC and 858 Sample Processor last year, the first IC instruments to contain intelligence as standard within the hardware and software MagIC Net.
News from Metrohm UK, Oct 20, 2008
Audio Video releases thermal imaging cameras
Audio Video Supply has introduced the Flir thermal imaging cameras line.
News from Audio Video Supply, Oct 10, 2008
Audio Video extends NED Line Scan camera range
Audio Video Supply has introduced a new line of NED Line Scan cameras.
News from Audio Video Supply, Oct 9, 2008
Audio Video supplies NED line-scan cameras
Audio Video Supply has introduced a range of NED line-scan cameras.
News from Audio Video Supply, Oct 8, 2008
Baumer launches UFAR measuring device
Baumer has launched the UFAR, a measuring device that detects the level of granulates, pastes and liquids, independent of their colour or consistency.
News from Baumer Group, Sep 18, 2008
New range of accelerometers from Kistler
The range of single axis K-Beam capacitive accelerometers from Kistler Instruments covers a measuring range from 2g to 100g in five models with the option of unipolar or differential output.
News from Kistler Instruments, Sep 9, 2008
RDP launches universal load cell catalogue
RDP Electronics has launched a catalogue of universal load cells.
News from RDP Electronics, Aug 21, 2008
X-Rite introduces xDNA colour measurement system
X-Rite has launched its xDNA system, designed to save automakers and automotive suppliers time and money in applying effect paints.
News from X-Rite, Aug 19, 2008
Universal qualification products introduced
Universal qualification products make instrument qualifications easier to deliver in a shorter time with improved traceability.
News from NLG Analytical, Dec 13, 2007
USB ready gauge features high accuracy
For those who need the basics in a digital indicator, a digital indicator allows multiple indicators to be inexpensively linked to PCs through a USB hub.
News from Mahr Federal, Dec 11, 2007
Optical spectrum analyser has high resolution
Optical spectrum analyser combines a wide wavelength range of 1200 to 2400nm with high resolution between 50pm and 2nm and high sensitivity of -70 dBm or better.
News from Yokogawa Europe - Test and Measurement, Dec 11, 2007
Coating measurement is Windows-based
A portable version of a bench material coating measurement system's harware and software platforms used in a compact, hand-held unit are Window-based.
News from Fischer Instrumentation (GB), Nov 22, 2007
Burst test machine ideal for pouches and blisters
A new, inexpensive, dedicated burst test machine, ideal for QA testing of medical pouches and blisters, offers simple use and affordability.
News from MET, Oct 22, 2007
Toxic and hazardous gases detected
A new fleet of instruments from Ashtead Technology Rentals is designed to detect toxic and hazardous gases in drains and underground cavities.
News from Ashtead Technology Rentals, Oct 15, 2007
Customised colour spectral analysis on show
MAZeT will be showcasing customer-specific solutions for colour analysis and spectral sensor systems, and it latest products at the Sensor + Test 2007 trade fair.
News from Mazet, Jun 13, 2007
Not what you're looking for? Search the site.
Featured articles
-
PI nanopositioning stages deliver accurate motion
Physik Instrumente (PI) has extended its line of piezo stages for super-resolution microscopy with the PI Nano series nanopositioning stages.
Articles by product category
-
Machine Tools: Cutting (4,202)
- Machine Tools: Cutting (6)
- CNC lathes (281)
- CNC turning centres, mill/turning, multi-tasking centres, horizontal and VTLs. (350)
- CNC automatic lathes (292)
- Machining centres - all types (157)
- Horizontal machining centres (HMC) (154)
- Vertical machining centres (VMC) (330)
- 5-axis (3+2 axes and continuous path) machining centres (152)
- Flexible machining cells and systems (FMS) (84)
- Manual lathes and manual/CNC (combination or half-NC) lathes (35)
- Milling, boring and routing machines - manual and CNC (140)
- Abrasive machining - manual and CNC machines (224)
- Drilling machines and drill/tap centres (50)
- Pick-up spindle turning, multi-tasking, turning and machining centres (46)
- Honing, polishing, burnishing and lapping (33)
- Rotary and linear transfer machines (48)
- Sawing and cutting-off machines and automation systems (125)
- Large milling and boring machines (over 2000mm in X) (84)
- Miscellaneous machine tools, gear cutting machines and equipment (103)
- Control systems, DROs, etc, for machine tools (270)
- CAM, software, off-line programming, for metal cutting machine tools (747)
- Miscellaneous machine tool equipment (fixtures, rotary tables etc.) (164)
- Bar feeders, loaders and parts catchers (57)
- Micro- and nano-machining (30)
- Portable power tools (128)
- Machine spindles and spindle attachments (31)
- Probes, sensors, tool detection, calibration for machine tools (81)
-
Machine Tools: Metalforming, shearing, folding and punching (1,656)
- Machine Tools: Metalforming, shearing, folding and punching (3)
- Power presses, mechanical (48)
- Power presses, hydraulic (51)
- Forging presses, hammers and screw presses (7)
- CNC punching and profiling (187)
- CNC plasma-arc and oxy-fuel gas cutting/profiling machines (84)
- CNC laser cutting and profiling machines (166)
- CNC water jet cutting and profiling machines (139)
- Guillotines, shears, circling and notching machines (8)
- Structural bending machines & steelworkers (13)
- CNC laser machining, engaving and welding (22)
- Pressbrakes and folding machines (85)
- Press tools - design, manufacture and usage, CAD/CAM, software (66)
- Forming, swaging and extrusion machines (8)
- Cold roll forming systems and software (13)
- Special purpose presses and equipment (58)
- Jigs, fixtures, special tooling and gauging (9)
- Control systems for metalforming machines and equipment (24)
- Press shop and sheet metal working automation, slitting, shearing (99)
- EDM diesinking (64)
- EDM wire cutting (131)
- EDM wire and diesinking, ECM, miscellaneous equipment (26)
- CAM and software for sheetmetal, punching, profiling, EDM, etc (146)
- Tubeworking: bending, cutting-off, profiling and end working (87)
- Miscellaneous metal forming machines (wire, canning,etc) and equipment (19)
- Metalforming lubricants (48)
- Laser and high energy beams - machining, forming, processing (45)
-
Machine Tools: moulding (1,180)
- Machine Tools: moulding (1)
- Injection moulding (201)
- Blow moulding (16)
- Extrusion machines (39)
- Second operation equipment (15)
- Profiling, trimming, routing and drilling (13)
- Joining and bonding (21)
- Handling and automation equipment (88)
- Mould and die making, machining, CAD/CAM, software (262)
- Rapid prototyping/manufacturing machines, systems, equipment (173)
- Diecasting machines and equipment (32)
- Moulding materials (231)
- Diecasting materials (4)
- Metals foundry, materials and equipment (52)
- Sub-contract plastics machining services (3)
- Special purpose moulding machines and systems (29)
-
Cutting tools (1,975)
- Cutting tools (12)
- Turning tools (182)
- Milling cutters (324)
- Drilling, boring and reaming (145)
- Tapping, chasing and thread rolling tools, attachments (10)
- Special purpose and multi-function tooling, broaching, etc. (78)
- Tool and cutter grinding (139)
- Tool and cutter manufacturing (23)
- Abrasive grinding wheels, abrasives (79)
- Honing, lapping and burnishing (8)
- Saw blades (10)
- Circular saws and abrasive discs (3)
- Tool identification and handling (16)
- Tool management systems, handling and software (50)
- Tool and cutter pre-setting (34)
- Tooling services (10)
- Toolholders (104)
- Swarf management equipment (6)
- Threading tools (55)
- Workholding - miscellaneous clamping systems, components (221)
- Cutting lubricants, coolants, systems and treatment (221)
- Tooling materials and inserts (75)
- Chucks and collets for rotational work (94)
- Vices, chucks, towers, pillars, cubes, tombstones - prismatic work (76)
-
Welding and Joining (1,596)
- Welding and Joining (2)
- Resistance welding equipment (47)
- Arc welding equipment, manual and automatic (340)
- Automatic and robotic welding systems (199)
- Mechanical fasteners, fixing and joining, and equipment (302)
- Adhesives and adhesive bonding equipment (232)
- Special purpose joining equipment (33)
- Handling and automation equipment (7)
- Non-destructive testing equipment (20)
- Seam-tracking, guidance systems (21)
- Welding ancilliaries (177)
- Laser and electron beam welding (96)
- Thermal and weld hardfacing, coating and overlaying (9)
- arc-air gouging, lancing equipment (11)
- Weld preparation equipment (14)
- Manual oxy-fuel gas cutting, welding, brazing soldering and cutting (27)
- Manual plasma-arc cutting equipment (8)
- Welding consumables, rods, wires, fluxes, powders (34)
-
Finishing, preparation, coating and painting (1,149)
- Finishing, preparation, coating and painting (3)
- Deburring, de-flashing and fettling (143)
- Washing and pretreatment (160)
- Heat treatment, furnaces, quenching media (10)
- Plating and plating systems (61)
- Coatings and coating systems (144)
- Paint and painting systems (66)
- Polishing, buffing and surface texturing (46)
- Integrated systems (11)
- Quality control (6)
- Cleaning media and cleaning systems (360)
- Sealing equipment (13)
- Metals heat treatment, mechanical stress relieving (21)
- Thermal processing equipment (drying, curing, etc) (105)
-
Automation, assembly systems and computer systems (1,297)
- Automation, assembly systems and computer systems (4)
- System integration services (69)
- Automation and assembly systems (78)
- Automation and assembly equipment (266)
- Consultants (automation systems) (3)
- Control systems, panels, HMIs, interfaces, screens (465)
- Industrial computers, PCs, PLCs, notebooks, etc. (268)
- Automation, control software (144)
-
Manufacturing support (9,149)
- Manufacturing support (9)
- Robots and robotic systems (392)
- Actuators, motion systems, etc (347)
- Gantries, manipulators and positioners/positioning tables (47)
- Positioning stages - linear, rotary, multi-axis (70)
- Air compressors (120)
- Airline equipment, filters, drains and traps, control systems, etc. (145)
- Monitoring and sensor equipment and systems (1,479)
- Electrical systems (995)
- Plant services equipment, filters, filtration systems, etc (425)
- Industrial gases and associated equipment (101)
- Pumps and valves (242)
- Maintenance planning, services and equipment (409)
- Drives, motors and power transmission, couplings, clutches (1,489)
- Lubrication - lubricants and lubrication systems (166)
- Laser marking systems (149)
- Pneumatic equipment (341)
- Seals, gaskets, bushes, etc (117)
- Hydraulic equipment and fluids (155)
- Hand tools - wrenches, etc. (25)
- Component marking, printing and labelling systems (non-laser) (216)
- Bearings and guideways - rotary and linear (299)
- Dispensing, filling and weighing systems (269)
- Machine and production line ancillaries, miscellaneous equipment (467)
- Metals and materials, stockholding (187)
- Benches, work stations, platforms, lifts, parts storage and cabinets (74)
-
Industry news, commerce, exhibitions, education (8,508)
- Industry news, commerce, exhibitions, education (5)
- Manufacturing industry news (2,403)
- Manufacturing orders, contracts, financial reports (1,193)
- People in Manufacturing (1,018)
- Manufacturing dealerships, agencies and acquisitions (1,578)
- Manufacturing conferences and exhibitions (329)
- Manufacturing seminars and workshops (225)
- In-house manufacturing exhibitions, Open Days, Roadshows, events (164)
- Industrial and management training courses (280)
- Manufacturing exhibitions (323)
- Industrial consultancy services (430)
- Industrial Development Agencies and services (74)
- Professional Associations, Institutions, Institutes, Standards bodies (322)
- Research and development, technical centres, universities (100)
- Manufacturing finance: production investment support (54)
- Manufacturing finance: insurance services (10)
-
Packaging (2,891)
- Packaging (4)
- Adhesives and tapes materials, equipment and services (25)
- Bags and bagmaking materials, equipment and services (79)
- Bottles, bottling and jars materials, equipment and services (181)
- Boxes and cases materials, equipment and services (44)
- Bulk containers materials, equipment and services (28)
- Cans, canning and tins materials, equipment and services (22)
- Carton converting materials, equipment and services (26)
- Closures, fasteners and dispensers materials, equipment and services (92)
- Coding and marking materials, equipment and services (98)
- Contract packing (19)
- Control and inspection equipment and services (74)
- Conveying, handling and end-of-line equipment (293)
- Filling, filling equipment and services (42)
- Film materials, equipment and services (101)
- Food Packaging (179)
- General packaging materials, equipment and services (857)
- Label converting and sleeving materials, equipment and services (156)
- Packaging management software (36)
- Packaging design materials, equipment and services (37)
- Pharmaceutical and medical packaging (56)
- Printing materials, equipment and services (196)
- Packaging trade organisations (51)
- Weighing and counting equipment (112)
- Packaging exhibitions, conferences and seminars (76)
- Anticounterfeiting technology (5)
-
Specialist Manufacturing Sectors and Metals Producing (1,409)
- Metals processing plant and equipment (142)
- Rolling mills and equipment (99)
- Metals finishing lines and equipment (33)
- Motor sports manufacturing: machining, software, CAM (69)
- Motor sports manufacturing: fabrication and assembly (39)
- Motor sports manufacturing: specialist coating and finishing (4)
- Food and drink manufacturing: processing equipment (292)
- Food and drink manufacturing: packaging and bottling equipment (177)
- Pharmaceutical/medical manufacturing: production equipment (64)
- Pharmaceutical manufacturing: handling and packaging equipment (48)
- Pharmaceutical manufacturing: production software (4)
- Cosmetics manufacturing: packaging and dispensing (3)
- Electronics manufacturing: equipment, automation, software (265)
- Electronics manufacturing: quality control equipment, software (117)
- Books, CDs and Videos (214)
-
IT for manufacturing management and production (4,076)
- IT for manufacturing management and production (19)
- Production costing, job estimating and quotations software (69)
- Business management systems, including SCADA, assets, projects, CRM (401)
- Supply chain management and software (146)
- Enterprise Resource Planning software (ERP) (743)
- Manufacturing Resource Planning software (MRP) (54)
- Factory data acquisition (non-RFID), data logging (318)
- Warehouse and logistics management software (49)
- Production, shopfloor planning, control and scheduling software (144)
- Work-in-progress tracking software (46)
- Lean Manufacturing (42)
- RFID systems, wireless hardware and software (263)
- EDI - electronic data interchange and software (8)
- Document and workflow management (198)
- Industrial networking and communications (353)
- CAD systems, CAD translation and solid modelling for production (174)
- Analysis, simulation and mathematical software for production (153)
- Scanners, imagers for reading codes, bar codes, labels, etc. (22)
- Product life cycle management (PLM) (121)
-
IT for engineering, industrial and commercial applications (2,726)
- IT for engineering, industrial and commercial applications (11)
- Manufacturing IT Platforms (68)
- Programming aids and applications (352)
- Training Aids and eCommunication (485)
- HR, Payroll, Time and Attendance software (47)
- Data acquisition software and systems (146)
- Manufacturing Information Technology systems (356)
- Used machinery and machine tools (37)
-
Materials handling and storage (1,043)
- Materials handling and storage (9)
- Standard fork lift trucks and attachments (104)
- Stacking and picking, aisle trucks, tower trucks, container trucks (62)
- Other lifting, loading and elevating equipment (80)
- Automated handling systems, AGVs, integrated handling systems (39)
- Cranes, hoists, winches, chains and ancillaries (106)
- Conveyor systems (production and general purpose) (243)
- Specialist and bespoke handling equipment and services (46)
- Storage hardware and storage and racking systems (85)
- Miscellaneous equipment, batteries, battery charging systems, etc (45)
- Tugs, tractors, trucks, pushers, jacks, trollies, skips, etc. (64)
- Storage and handling services, consultancy, associations (22)
- Weighbridges, weighing systems (3)
- Loading dock and yard handling equipment (51)
- Logistics and freight transport (84)
- Wood and non-metallics working (79)
-
Metrology instruments and systems (3,892)
- Metrology instruments and systems (3)
- Gauging and Hand Tools for Inspection (159)
- Calibration Instruments (345)
- Non-contact, Optical, X-ray and Laser measurement systems (731)
- Coordinate measurement arms, systems and software (106)
- Surface, Profile and Topology systems (41)
- Measurement and Quality Software and SPC (1,026)
- Metrology standards room equipment (15)
- Production metrology, measuring equipment/systems, DROs (21)
- Coordinate measuring machines (CMM) and software (173)
- Thickness gauging and measurement (23)
- Measurement systems including encoders (261)
- Probes and sensors (332)
- Laser-based systems (49)
- Vision and scanning systems (363)
-
Testing and quality control systems and services (5,264)
- Testing and quality control systems and services (7)
- Electrical and Electronic Testing (906)
- Calibration and Testing Services, Consultancy and Learning (529)
- Materials Testing (2,655)
- Non Destructive Testing (222)
- Inspection and testing (non-metrology), NVH (228)
- Miscellaneous Instruments (141)
- Quality control systems/SPC software (108)
- Torque measurement devices and systems (126)
- Machine vision systems and accessories (325)
- Consultants and services: quality control, assurance (17)
-
Subcontracting services (1,267)
- Subcontracting services (1)
- General machining (209)
- Special purpose machining (47)
- Mould, die and tool making (101)
- Casting, die-casting and forging, hot and cold working (64)
- Sheet metal presswork, stamping and fabrication (187)
- Treatment and finishing (26)
- Electronics and electrical design and manufacture (199)
- Plastics and rubber moulding (100)
- Machine, plant rebuild, overhaul, upgrade and repair (21)
- General subcontracting services (66)
- Heat treatment (12)
- Sheet metals, plate, non-metals cutting and profiling (48)
- Fast prototyping and pattern making services (71)
- Plating and galvanising services (9)
- Machining and assembly (59)
- Gear making and gear systems and related services (7)
- Subcon Exhibition (40)