Slip, trip and fall protection
(a sub category of Health and Safety Equipment)
A - Z list of suppliers
Click on a letter below to find a supplier...
Latest articles from 'Slip, trip and fall protection'
News releases from this sub-category
Showing 1-25 of 170 articles
Arco steps up prevention against slips and trips
Arco is supporting the Health and Safety Executive's (HSE) Shattered Lives campaign to help businesses drive down the cost of injuries caused by slips, trips and falls.
News from Arco, Dec 5, 2008
Ceram releases guide to slip resistance
Ceram is now offering standardised flooring slip tests to ensure flooring surfaces do not pose a health and safety threat to people.
News from Ceram, Dec 5, 2008
Zed Chex makes standing easier
Plastic Extruders has developed Zed Chex, to reduce fatigue caused by standing for long periods on hard floors or in cold and damp underfoot conditions.
News from Plastic Extruders, Oct 29, 2008
Metro Plating chooses Vynagrip matting
Long lines of Vynagrip matting have been installed beside the acid baths of Metro Plating, a rapid anodising company.
News from Plastic Extruders, Sep 30, 2008
Heronair matting drives car production
Car manufacturing giants Nissan and Toyota have recently improved the safety and wellbeing of employees by installing large areas of Heronair matting.
News from Plastic Extruders, Aug 19, 2008
Matting avoids slipping on CRF lubrication
Large areas of Flexigrid high performance slip resistant matting is providing a safe, slip-reistant walkway where fluid seeps from steel product cold rolling lines.
News from Plastic Extruders, Jun 30, 2008
Planet at Southern Manufacturing Show 2008
Access equipment manufacturer and distributor Planet Platforms exhibited at the Southern Manufacturing Show, the largest UK regional manufacturing technology, electronics and subcontracting exhibition
News from Planet Platforms, Mar 6, 2008
Avoid operators' slips, trips and falls
Stringent health and safety legislation is increasingly forcing employers to provide better care for employees and relief from the physical problems which arise from prolonged standing at work.
News from Plastic Extruders, Feb 21, 2008
Cushioned floor slats improve operator safety
To prevent operator strain injuries, interlocking plastics floor slats provide a safe, non-slip, stable surface, which is cushioned and comfortable to walk, work or stand on.
News from Schoeller Arca Systems, Jan 9, 2008
Floorcoverings reduce operators' standing fatigue
Self draining and slip resistant anti fatigue floor coverings are designed to provide excellent cushioning, which enhances comfort underfoot and reduces operators' standing fatigue.
News from Plastic Extruders, Dec 28, 2007
Tough matting reduces fatigue, enhances safety
The latest version of Flexigrid matting, manufactured by Plastic Extruders, offers toughness, slip resistance and flexibility to reduce accidents and fatigue.
News from Plastic Extruders, Oct 10, 2007
Tagging system implemented for on-board equipment
Scafftag's solutions are keeping Northern Marine Management one step ahead in safety.
News from Scafftag, Jun 28, 2007
Zarges' new lifts are in the van
New mobile elevated work platform (MEWP) range from Zarges UK gets even more compact.
News from Zarges (UK), Jun 25, 2007
Planet Platforms' solution for the Orient-Express
Planet Platform has found safe access solution for the Orient-Express.
News from Planet Platforms, Jun 22, 2007
Slip resistance at the Tile and Stone show
Ceram will be presenting their "Slips and Trips programme" at the Tile and Stone show, which is being held from 1st - 3rd July 2007 at ExCel, London.
News from Ceram, May 28, 2007
New safety legs from Zarges
Zarges' latest ladder safety product is now released.
News from Zarges (UK), May 28, 2007
Slip testing on a wide range of flooring surfaces
CERAM carries out the BS7976 pendulum test, designed to simulate the action of a slipping foot, and the ramp test which is split into DIN51130 - shod and the DIN51097 barefoot.
News from Ceram, May 2, 2007
Resolve slip issues on hard floor surfaces
Handl Solutions will be exhibiting their range of 'No Skidding' slip prevention products, suitable for any hard floor surface, at the Safety and Health expo at the NEC from 22-24th May.
News from Handl Solutions, Apr 23, 2007
Scafftag will be present at Safety and Health Expo
Scafftag Equip initiative to be launched at Safety and Health Expo 2007 with free draw for expert assessment.
News from Scafftag, Apr 5, 2007
New A5 easy-to-use tool hire guide
Following extensive consultation with suppliers and customers, A-Plant is launching a new updated version of the company's popular Tool Hire Guide.
News from A-Plant, Mar 26, 2007
Anti-fatigue matting makes standing easy
Tuff Spun is one of a range of anti-fatigue mattings, launched by Plastic Extruders (Plastex).
News from Plastic Extruders, Mar 22, 2007
Health promotion on show from A-Plant
A-Plant is launching new health and Safety initiatives at Safety and Health Expo.
News from A-Plant, Mar 21, 2007
Free £250 prize draw at Maintec 2007
Scafftag to offer Maintec 2007 visitors opportunity to enter free £250 prize draw - Stand H30, Maintec 2007, NEC, Birmingham, 20th - 22nd March 2007.
News from Scafftag, Mar 13, 2007
Working at height secured by new anchors
Workplace Access and Safety provides the full safety package for roof access involving roof anchors - from system design and installation to training, annual maintenance and certification.
News from Workplace Access & Safety, Mar 6, 2007
Near misses avoided thanks to new tagging system
Scafftag gives Chevron all round benefits as near misses reduced to zero with Unitag system.
News from Scafftag, Feb 21, 2007
Not what you're looking for? Search the site.
Articles by product category
-
Machine Tools: Cutting (4,202)
- Machine Tools: Cutting (6)
- CNC lathes (281)
- CNC turning centres, mill/turning, multi-tasking centres, horizontal and VTLs. (350)
- CNC automatic lathes (292)
- Machining centres - all types (157)
- Horizontal machining centres (HMC) (154)
- Vertical machining centres (VMC) (330)
- 5-axis (3+2 axes and continuous path) machining centres (152)
- Flexible machining cells and systems (FMS) (84)
- Manual lathes and manual/CNC (combination or half-NC) lathes (35)
- Milling, boring and routing machines - manual and CNC (140)
- Abrasive machining - manual and CNC machines (224)
- Drilling machines and drill/tap centres (50)
- Pick-up spindle turning, multi-tasking, turning and machining centres (46)
- Honing, polishing, burnishing and lapping (33)
- Rotary and linear transfer machines (48)
- Sawing and cutting-off machines and automation systems (125)
- Large milling and boring machines (over 2000mm in X) (84)
- Miscellaneous machine tools, gear cutting machines and equipment (103)
- Control systems, DROs, etc, for machine tools (270)
- CAM, software, off-line programming, for metal cutting machine tools (747)
- Miscellaneous machine tool equipment (fixtures, rotary tables etc.) (164)
- Bar feeders, loaders and parts catchers (57)
- Micro- and nano-machining (30)
- Portable power tools (128)
- Machine spindles and spindle attachments (31)
- Probes, sensors, tool detection, calibration for machine tools (81)
-
Machine Tools: Metalforming, shearing, folding and punching (1,656)
- Machine Tools: Metalforming, shearing, folding and punching (3)
- Power presses, mechanical (48)
- Power presses, hydraulic (51)
- Forging presses, hammers and screw presses (7)
- CNC punching and profiling (187)
- CNC plasma-arc and oxy-fuel gas cutting/profiling machines (84)
- CNC laser cutting and profiling machines (166)
- CNC water jet cutting and profiling machines (139)
- Guillotines, shears, circling and notching machines (8)
- Structural bending machines & steelworkers (13)
- CNC laser machining, engaving and welding (22)
- Pressbrakes and folding machines (85)
- Press tools - design, manufacture and usage, CAD/CAM, software (66)
- Forming, swaging and extrusion machines (8)
- Cold roll forming systems and software (13)
- Special purpose presses and equipment (58)
- Jigs, fixtures, special tooling and gauging (9)
- Control systems for metalforming machines and equipment (24)
- Press shop and sheet metal working automation, slitting, shearing (99)
- EDM diesinking (64)
- EDM wire cutting (131)
- EDM wire and diesinking, ECM, miscellaneous equipment (26)
- CAM and software for sheetmetal, punching, profiling, EDM, etc (146)
- Tubeworking: bending, cutting-off, profiling and end working (87)
- Miscellaneous metal forming machines (wire, canning,etc) and equipment (19)
- Metalforming lubricants (48)
- Laser and high energy beams - machining, forming, processing (45)
-
Machine Tools: moulding (1,180)
- Machine Tools: moulding (1)
- Injection moulding (201)
- Blow moulding (16)
- Extrusion machines (39)
- Second operation equipment (15)
- Profiling, trimming, routing and drilling (13)
- Joining and bonding (21)
- Handling and automation equipment (88)
- Mould and die making, machining, CAD/CAM, software (262)
- Rapid prototyping/manufacturing machines, systems, equipment (173)
- Diecasting machines and equipment (32)
- Moulding materials (231)
- Diecasting materials (4)
- Metals foundry, materials and equipment (52)
- Sub-contract plastics machining services (3)
- Special purpose moulding machines and systems (29)
-
Cutting tools (1,975)
- Cutting tools (12)
- Turning tools (182)
- Milling cutters (324)
- Drilling, boring and reaming (145)
- Tapping, chasing and thread rolling tools, attachments (10)
- Special purpose and multi-function tooling, broaching, etc. (78)
- Tool and cutter grinding (139)
- Tool and cutter manufacturing (23)
- Abrasive grinding wheels, abrasives (79)
- Honing, lapping and burnishing (8)
- Saw blades (10)
- Circular saws and abrasive discs (3)
- Tool identification and handling (16)
- Tool management systems, handling and software (50)
- Tool and cutter pre-setting (34)
- Tooling services (10)
- Toolholders (104)
- Swarf management equipment (6)
- Threading tools (55)
- Workholding - miscellaneous clamping systems, components (221)
- Cutting lubricants, coolants, systems and treatment (221)
- Tooling materials and inserts (75)
- Chucks and collets for rotational work (94)
- Vices, chucks, towers, pillars, cubes, tombstones - prismatic work (76)
-
Welding and Joining (1,596)
- Welding and Joining (2)
- Resistance welding equipment (47)
- Arc welding equipment, manual and automatic (340)
- Automatic and robotic welding systems (199)
- Mechanical fasteners, fixing and joining, and equipment (302)
- Adhesives and adhesive bonding equipment (232)
- Special purpose joining equipment (33)
- Handling and automation equipment (7)
- Non-destructive testing equipment (20)
- Seam-tracking, guidance systems (21)
- Welding ancilliaries (177)
- Laser and electron beam welding (96)
- Thermal and weld hardfacing, coating and overlaying (9)
- arc-air gouging, lancing equipment (11)
- Weld preparation equipment (14)
- Manual oxy-fuel gas cutting, welding, brazing soldering and cutting (27)
- Manual plasma-arc cutting equipment (8)
- Welding consumables, rods, wires, fluxes, powders (34)
-
Finishing, preparation, coating and painting (1,149)
- Finishing, preparation, coating and painting (3)
- Deburring, de-flashing and fettling (143)
- Washing and pretreatment (160)
- Heat treatment, furnaces, quenching media (10)
- Plating and plating systems (61)
- Coatings and coating systems (144)
- Paint and painting systems (66)
- Polishing, buffing and surface texturing (46)
- Integrated systems (11)
- Quality control (6)
- Cleaning media and cleaning systems (360)
- Sealing equipment (13)
- Metals heat treatment, mechanical stress relieving (21)
- Thermal processing equipment (drying, curing, etc) (105)
-
Automation, assembly systems and computer systems (1,297)
- Automation, assembly systems and computer systems (4)
- System integration services (69)
- Automation and assembly systems (78)
- Automation and assembly equipment (266)
- Consultants (automation systems) (3)
- Control systems, panels, HMIs, interfaces, screens (465)
- Industrial computers, PCs, PLCs, notebooks, etc. (268)
- Automation, control software (144)
-
Manufacturing support (9,149)
- Manufacturing support (9)
- Robots and robotic systems (392)
- Actuators, motion systems, etc (347)
- Gantries, manipulators and positioners/positioning tables (47)
- Positioning stages - linear, rotary, multi-axis (70)
- Air compressors (120)
- Airline equipment, filters, drains and traps, control systems, etc. (145)
- Monitoring and sensor equipment and systems (1,479)
- Electrical systems (995)
- Plant services equipment, filters, filtration systems, etc (425)
- Industrial gases and associated equipment (101)
- Pumps and valves (242)
- Maintenance planning, services and equipment (409)
- Drives, motors and power transmission, couplings, clutches (1,489)
- Lubrication - lubricants and lubrication systems (166)
- Laser marking systems (149)
- Pneumatic equipment (341)
- Seals, gaskets, bushes, etc (117)
- Hydraulic equipment and fluids (155)
- Hand tools - wrenches, etc. (25)
- Component marking, printing and labelling systems (non-laser) (216)
- Bearings and guideways - rotary and linear (299)
- Dispensing, filling and weighing systems (269)
- Machine and production line ancillaries, miscellaneous equipment (467)
- Metals and materials, stockholding (187)
- Benches, work stations, platforms, lifts, parts storage and cabinets (74)
-
Industry news, commerce, exhibitions, education (8,508)
- Industry news, commerce, exhibitions, education (5)
- Manufacturing industry news (2,403)
- Manufacturing orders, contracts, financial reports (1,193)
- People in Manufacturing (1,018)
- Manufacturing dealerships, agencies and acquisitions (1,578)
- Manufacturing conferences and exhibitions (329)
- Manufacturing seminars and workshops (225)
- In-house manufacturing exhibitions, Open Days, Roadshows, events (164)
- Industrial and management training courses (280)
- Manufacturing exhibitions (323)
- Industrial consultancy services (430)
- Industrial Development Agencies and services (74)
- Professional Associations, Institutions, Institutes, Standards bodies (322)
- Research and development, technical centres, universities (100)
- Manufacturing finance: production investment support (54)
- Manufacturing finance: insurance services (10)
-
Packaging (2,891)
- Packaging (4)
- Adhesives and tapes materials, equipment and services (25)
- Bags and bagmaking materials, equipment and services (79)
- Bottles, bottling and jars materials, equipment and services (181)
- Boxes and cases materials, equipment and services (44)
- Bulk containers materials, equipment and services (28)
- Cans, canning and tins materials, equipment and services (22)
- Carton converting materials, equipment and services (26)
- Closures, fasteners and dispensers materials, equipment and services (92)
- Coding and marking materials, equipment and services (98)
- Contract packing (19)
- Control and inspection equipment and services (74)
- Conveying, handling and end-of-line equipment (293)
- Filling, filling equipment and services (42)
- Film materials, equipment and services (101)
- Food Packaging (179)
- General packaging materials, equipment and services (857)
- Label converting and sleeving materials, equipment and services (156)
- Packaging management software (36)
- Packaging design materials, equipment and services (37)
- Pharmaceutical and medical packaging (56)
- Printing materials, equipment and services (196)
- Packaging trade organisations (51)
- Weighing and counting equipment (112)
- Packaging exhibitions, conferences and seminars (76)
- Anticounterfeiting technology (5)
-
Specialist Manufacturing Sectors and Metals Producing (1,409)
- Metals processing plant and equipment (142)
- Rolling mills and equipment (99)
- Metals finishing lines and equipment (33)
- Motor sports manufacturing: machining, software, CAM (69)
- Motor sports manufacturing: fabrication and assembly (39)
- Motor sports manufacturing: specialist coating and finishing (4)
- Food and drink manufacturing: processing equipment (292)
- Food and drink manufacturing: packaging and bottling equipment (177)
- Pharmaceutical/medical manufacturing: production equipment (64)
- Pharmaceutical manufacturing: handling and packaging equipment (48)
- Pharmaceutical manufacturing: production software (4)
- Cosmetics manufacturing: packaging and dispensing (3)
- Electronics manufacturing: equipment, automation, software (265)
- Electronics manufacturing: quality control equipment, software (117)
- Books, CDs and Videos (214)
-
IT for manufacturing management and production (4,076)
- IT for manufacturing management and production (19)
- Production costing, job estimating and quotations software (69)
- Business management systems, including SCADA, assets, projects, CRM (401)
- Supply chain management and software (146)
- Enterprise Resource Planning software (ERP) (743)
- Manufacturing Resource Planning software (MRP) (54)
- Factory data acquisition (non-RFID), data logging (318)
- Warehouse and logistics management software (49)
- Production, shopfloor planning, control and scheduling software (144)
- Work-in-progress tracking software (46)
- Lean Manufacturing (42)
- RFID systems, wireless hardware and software (263)
- EDI - electronic data interchange and software (8)
- Document and workflow management (198)
- Industrial networking and communications (353)
- CAD systems, CAD translation and solid modelling for production (174)
- Analysis, simulation and mathematical software for production (153)
- Scanners, imagers for reading codes, bar codes, labels, etc. (22)
- Product life cycle management (PLM) (121)
-
IT for engineering, industrial and commercial applications (2,726)
- IT for engineering, industrial and commercial applications (11)
- Manufacturing IT Platforms (68)
- Programming aids and applications (352)
- Training Aids and eCommunication (485)
- HR, Payroll, Time and Attendance software (47)
- Data acquisition software and systems (146)
- Manufacturing Information Technology systems (356)
- Used machinery and machine tools (37)
-
Materials handling and storage (1,043)
- Materials handling and storage (9)
- Standard fork lift trucks and attachments (104)
- Stacking and picking, aisle trucks, tower trucks, container trucks (62)
- Other lifting, loading and elevating equipment (80)
- Automated handling systems, AGVs, integrated handling systems (39)
- Cranes, hoists, winches, chains and ancillaries (106)
- Conveyor systems (production and general purpose) (243)
- Specialist and bespoke handling equipment and services (46)
- Storage hardware and storage and racking systems (85)
- Miscellaneous equipment, batteries, battery charging systems, etc (45)
- Tugs, tractors, trucks, pushers, jacks, trollies, skips, etc. (64)
- Storage and handling services, consultancy, associations (22)
- Weighbridges, weighing systems (3)
- Loading dock and yard handling equipment (51)
- Logistics and freight transport (84)
- Wood and non-metallics working (79)
-
Metrology instruments and systems (3,892)
- Metrology instruments and systems (3)
- Gauging and Hand Tools for Inspection (159)
- Calibration Instruments (345)
- Non-contact, Optical, X-ray and Laser measurement systems (731)
- Coordinate measurement arms, systems and software (106)
- Surface, Profile and Topology systems (41)
- Measurement and Quality Software and SPC (1,026)
- Metrology standards room equipment (15)
- Production metrology, measuring equipment/systems, DROs (21)
- Coordinate measuring machines (CMM) and software (173)
- Thickness gauging and measurement (23)
- Measurement systems including encoders (261)
- Probes and sensors (332)
- Laser-based systems (49)
- Vision and scanning systems (363)
-
Testing and quality control systems and services (5,264)
- Testing and quality control systems and services (7)
- Electrical and Electronic Testing (906)
- Calibration and Testing Services, Consultancy and Learning (529)
- Materials Testing (2,655)
- Non Destructive Testing (222)
- Inspection and testing (non-metrology), NVH (228)
- Miscellaneous Instruments (141)
- Quality control systems/SPC software (108)
- Torque measurement devices and systems (126)
- Machine vision systems and accessories (325)
- Consultants and services: quality control, assurance (17)
-
Subcontracting services (1,267)
- Subcontracting services (1)
- General machining (209)
- Special purpose machining (47)
- Mould, die and tool making (101)
- Casting, die-casting and forging, hot and cold working (64)
- Sheet metal presswork, stamping and fabrication (187)
- Treatment and finishing (26)
- Electronics and electrical design and manufacture (199)
- Plastics and rubber moulding (100)
- Machine, plant rebuild, overhaul, upgrade and repair (21)
- General subcontracting services (66)
- Heat treatment (12)
- Sheet metals, plate, non-metals cutting and profiling (48)
- Fast prototyping and pattern making services (71)
- Plating and galvanising services (9)
- Machining and assembly (59)
- Gear making and gear systems and related services (7)
- Subcon Exhibition (40)