News releases on Manufacturingtalk categorised by date
Sunday 21 September
to Saturday 27 September 2003
Why not hire thermal imaging cameras?
Cockburn Thermal Imaging provides a full range of services and products to the world of Thermography.
News from Cockburn Thermal Imaging (26 September 2003)
Frame grabbers support high speed analog cameras
Four completely independent channels supporting up to four cameras feature frame grabbers designed to support next generation high-speed analog cameras. Brochure Available
News from Cognex UK (26 September 2003)
Industrial control switches are easy to mount
A price-competitive selection of industrial control-switches are quick and easy to mount and contain all the controls needed for modern human-machine interfaces. Brochure Available
News from EAO (26 September 2003)
Identification system simplifies measurement
Two types of intelligent transducer identification system remove possible errors caused by manually entering parameters when configuring a measurement system. Brochure Available
News from HBM UK (26 September 2003)
Pocket guide helps turn theory into practice
Pocket guide helps engineers to go beyond theoretical concepts and learn how to implement practices after the objectives have been defined and the technology decisions have been made.
News from ISA (Instrumentation, Systems and Aut Soc) (26 September 2003)
Latest CAD connectivity solution supports CATIA V5
Moldflow Design Link (MDL) provides a geometry data translation interface between Moldflow's range of simulation products and leading CAD systems.
News from Moldflow Vertriebs (26 September 2003)
Panel interface enhances power control monitoring
Panel mount interface provides real time monitoring and diagnostics of behind the panel SCR's/thyristor power controllers.
News from Paragon Alliance (26 September 2003)
Siemens appoints new general manager
Siemens Automation and Drives has appointed Mark Higham as its new general manager for Industrial Control and Automation.
News from Siemens Automation and Drives (26 September 2003)
Ejector seat manufacture kept cool
User Application Article Staff moral at Martin-Baker's factory is at an all time high following the installation of an evaporative air cooling system to cool shopfloor temperatures. Brochure Available
News from Seeley International (Europe) (26 September 2003)
Microstepping drives supplied in Eurocard format
A range of half-stepping and microstepping drives based upon the popular 3U x 160mm Eurocard format are ideally suited to applications where extra smoothness and resolution are required.
News from SmartDrive (26 September 2003)
Many features added to latest CAD/CAM software
A historical tool design function, cooling hole and improved layer management, new splitline manager, dynamic face/edge and a new model comparison module feature latest CAD/CAM software.
News from Vero International Software (26 September 2003)
Powerful Pentium 4 single board computer
The Peak715VL Series SBC from Nexcom UK, based in Newport Pagnell, supports the Intel socket 478 Pentium 4 CPU with 400/533MHz system bus operating at up to 2.8 GHz. Brochure Available
News from Nexcom UK (26 September 2003)
Edgecam shortens product development
Pathtrace's EdgeCAM off-line programming software has revolutionised the machining of complex duplexer units produced by Aerial Facilities, a market leader in the manufacture of development components
News from Pathtrace Engineering Systems (26 September 2003)
Pathtrace expands into Australia and New Zealand
A key element in the global expansion plans of Pathtrace Engineering Systems of Reading is the investment in m2c of Melbourne, Australia
News from Pathtrace Engineering Systems (26 September 2003)
Edgecam endorsed for Autodesk Inventor 6
A further endorsement of EdgeCAM is the announcement by Autodesk that it has been certified for use with the latest Autodesk Inventor 6 release
News from Pathtrace Engineering Systems (26 September 2003)
Edgecam 7.5 shows its metal
A breakthrough in the graphical representation of machined components in EdgeCAM 7.5 enables toolpath characteristics such as surface finish and surface definition to be clearly visible.
News from Pathtrace Engineering Systems (26 September 2003)
Edgecam solution to long term success at EDM
EdgeCAM still in use at EDM Precision Engineering after investing in it almost seven years ago, such has been the pace of software development.
News from Pathtrace Engineering Systems (26 September 2003)
Edgecam puts the seal on machining efficiency
In order to optimise its programming routines, Greene, Tweed has invested in EdgeCAM offline programming software supplied by Pathtrace of Reading
News from Pathtrace Engineering Systems (26 September 2003)
Edgecam at the heart of manufacturing strategy
Customers of Weir Valves and Controls UK (WVCUK), can now benefit from its fully integrated computerised business process system to supply engineered valve solutions.
News from Pathtrace Engineering Systems (26 September 2003)
IKV uses Edgecam strategy manager
At IKV Tools, Pathtrace's EdgeCAM off-line programming software's Strategy Manager has been used to break down any internal barriers between design and production.
News from Pathtrace Engineering Systems (26 September 2003)
Edgecam has the edge for racing car components
Jaye Engineering of Ravenstone, near Olney in Buckinghamshire uses the latest version of the EdgeCAM offline CNC machine tool programming system from Pathtrace of Reading.
News from Pathtrace Engineering Systems (26 September 2003)
Integration puts the seal on bearing production
Rolls-Royce Marines Michell Bearings business unit has selected EdgeCAM off-line programming software, from Pathtrace of Reading
News from Pathtrace Engineering Systems (26 September 2003)
Morris gains benefits from Edgecam and Solidworks
Morris are using a combination of EdgeCAM and Solidworks which are seamlessly intgegrated.
News from Pathtrace Engineering Systems (26 September 2003)
Edgecam provides direct integration to Sandvik
The latest release of Pathtrace's off-line programming software EdgeCAM, version 7.75, now provides direct integration with the Sandvik Coroguide electronic tooling catalogue
News from Pathtrace Engineering Systems (26 September 2003)
Spaceball and Spacemouse support for Edgecam
Pathtrace, developer of EdgeCAM (registered) computer-aided manufacturing (CAM) software for programming CNC controls, is now supporting products from 3Dconnexion
News from Pathtrace Engineering Systems (26 September 2003)
Creation Technologies Purchases eMPower
Creation Technologies Purchases eMPower Execution Systems Products from Tecnomatix Electronics Contract Manufacturer to Improve Process Quality in Execution Systems
News from Tecnomatix Technologies (26 September 2003)
Fuji / Tecnomatix collaboration
Improving Connectivity for Machine Programming Tools Partnership Offers Seamless Connection between Fuji FLEXA and Tecnomatix eM-Assembly Expert
News from Tecnomatix Technologies (26 September 2003)
Microdynamics Group Satisfied with Dialogue
User Application Article Dialogue Helps Microdynamics Expand Capabilities and Significantly Reduce Development Time
News from Exstream Software (26 September 2003)
Mould-in films cut automotive production costs
Hardcoated in-mould decoration films simplify the production process by reducing the number of manufacturing stages and streamlining part production. Brochure Available
News from MacDermid Autotype (25 September 2003)
Glueing machine generates sealing paths from CAD
A new tool that generates motion control paths directly from CAD drawings is helping a leading airbag manufacturer to ramp up production for the fast-growing curtain-bag market. Brochure Available
News from Baldor UK (25 September 2003)
BetaTHERM expands UK sales distribution network
BetaTHERM, provider of high precision NTC thermistors and probe assemblies, has announced a partnership with Sequoia Technology as distributors in the UK.
News from Betatherm Ireland (25 September 2003)
End-to-end manufacturing solutions support Linux
Epicor Software says that its Vantage and Vista end-to-end manufacturing solutions for SMEs now offer support for Linux operating systems.
News from Epicor (25 September 2003)
Latest ERP, IT, to cut turnround time to hours
Cosmetic applicator maker, using latest ERP and IT, aims to reduce client quote turnaround time from 5 days to 24h, improve on-time delivery from 68% to 95% and cut raw material stocks.
News from Information Engineering (25 September 2003)
Robot controller is versatile and expansive
Allowing more effective and intuitive operation, a highly functional and versatile robot controller offers high level of expansion and easier operation and maintenance.
News from Kawasaki Robotics UK (25 September 2003)
Division set up to handle m/c service contracts
Division to handle service contracts covering Daewoo, Nakamura Tome, Kuraki and O-M machine tools has been established by UK agent, Mills Manufacturing Services.
News from Mills Manufacturing Technology (25 September 2003)
Waste management investment helps win new orders
Surface coating technology company, Poeton Industries, has won a substantial order from Spirax Sarco thanks to a recent GBP 90,000 investment in EDEN waste management process.
News from Poeton Industries (25 September 2003)
Plastics sub-assemblies oust metals
User Application Article A new pneumatic suspension that features replacing metal by plastics subassemblies relied on the optimisation of different injection moulding techniques.
News from Quadrant Creative Moulding and Systems (25 September 2003)
Special tools make the most of multi-function m/c
User Application Article Domestic fittings manufacturer opted for special tooling for a multi-functional machine to mill, drill, turn, bore, over-turn and interpolate shower mixer bodies, often at very complex angles.
News from Sandvik Coromant UK (25 September 2003)
SS enclosures protect drives in harsh environments
Versions of a high performance vector drive in IP56 stainless steel enclosures are use in highly aggressive environments where absolute protection of electronic equipment is essential.
News from WEG Electric Motors (UK) (25 September 2003)
Supply chain system covers office to distribution
Supply chain management system, comprising a complete range of integrated applications, covers from front office through to engineering, manufacturing and distribution functions.
News from Infor (25 September 2003)
3 Steps In Free Seminar
On Wednesday 22nd October 2003 at the Business Development Centre, Stafford Park 4, Telford, there is an opportunity to learn about the 3 steps required to achieve successful Rapid Product Development
News from 3T RPD (25 September 2003)
SplutterFish Supports OpenEXR Image Format Std
SplutterFish LLC, a high-end 3D rendering software solutions provider, today announced its has developed a Bitmap I/O plug-in for use in Discreet's 3ds max and Autodesk Viz, in support of OpenEXR.
News from SplutterFish (25 September 2003)
Modsak new version
Wingpath Software Development have released a major new version of Modsak
News from Wingpath Software Development (25 September 2003)
Technical Illustration at Ulrich Alber GmbH
At Ulrich Alber GmbH + Co, effective technical documentation was accomplished through the use of IsoDraw and IsoDraw CADprocess by ITEDO Software.
News from Itedo Software (25 September 2003)
Mathematica 5 is now shipping for all systems.
Dubbed the "Advanced Algorithms Release," Mathematica 5 introduces a whole new generation of advanced algorithms that bring a new level of speed and scope.
News from Wolfram Research Europe (25 September 2003)
Launch of Columbus Professional
The world's most popular document management system just got better.
News from Oasys (25 September 2003)
Laser Measuring Arm Enables Reverse Engineering
AXILA, whose CEO invented the first 6 axis portable CMM in 1986, has introduced G-Scan, the first laser scanner developed by a portable CMM manufacturer, and first rotary laser scanner in the market.
News from Axila (25 September 2003)
300m Transmission on Legacy Multimode Fiber
Finisar Corporation has announced that it has demonstrated a 10Gb/s XFP optical transceiver operating on 300 meters of legacy multimode fiber.
News from Finisar Corp (25 September 2003)
21 CFR 11 UV And FL Solutions Software Announced
Lambda Advanced Technology is delighted to announce the availability of 21 CFR Part 11 versions of the respected UV Solutions and FL Solutions control software. Brochure Available
News from Lambda Advanced Technology (25 September 2003)
Promising New Research Results Announced
Highlighting LGC's increased commitment to the pharmaceutical and biotechnology sectors, the company's new Pharmaceutical Services Division has announced promising results.
News from LGC (25 September 2003)
Titrator Range Compliant
Metrohm has announced that its range of potentiometric titrators, coulometric and volumetric Karl Fischer titrators are CFR 21 Part 11 compliant. Brochure Available
News from Metrohm UK (25 September 2003)
Analysis of Benzoate and Sorbate in Drinks
Technical Background Article Soft drinks have been part of our global lifestyle since the nineteenth century and many of the soft drinks we consume today are the same as those first enjoyed centuries ago. Brochure Available
News from Metrohm UK (25 September 2003)
Liquid Chromatography Goes To New Extremes
Extended temperature separations specialist Selerity Technologies has launched Polaratherm, its total temperature controller and silica columns that are stable to temperatures up to 100degC.
News from Selerity Technologies (25 September 2003)
Application Note Shows Better Separation Results
Selerity Technologies has produced a new free application note showing how laboratory managers can enhance the benefits of elevated temperatures in High Performance Liquid Chromatography.
News from Selerity Technologies (25 September 2003)
HD/SDI Waveform/Vector Scope Monitor
The new Leader LV 5170D, a multi-format HD/SDI waveform/vector scope monitor with dual CRT displays, is now available exclusively in the UK from TTi (Thurlby Thandar Instruments).
News from TTi (Thurlby Thandar Instruments) (25 September 2003)
Power press website set up in French and German
To provide customers in the European Union with the latest technology and metalforming information available, a power press builder has introduced two new websites in French and German.
News from AIDA-Europe, AIDA SAS UK Branch (24 September 2003)
Machine vision offers 100% quality checks
User Application Article Machine vision system replaces manual vision practices used in a high speed fuel injection production line, carrying out 100% checks in 9sec. Brochure Available
News from Cognex UK (24 September 2003)
Portable CMMs check tighter casting tolerances
User Application Article Increasing demands for near net shape castings, to reduce fettling and finishing, led to a foundry introducing a portable CMM and the latest software to maintain closer tolerances. Brochure Available
News from Delcam (24 September 2003)
Die spotting in house cut mould tool lead time
Die spotting press intruduction helped mould maker to shorten total mold manufacturing lead-time - to 30 days for simpler tools and 60 to 65 days on larger, more complex tools.
News from Dukheung Engineering (24 September 2003)
Seeking reduced operation costs boosts IAM uptake
IAM enables companies to strategically enhance operations by combining manufacturing agility with the synchronising of maintenance and operational requirements within the business as a whole.
News from Frost and Sullivan (24 September 2003)
Two stage conveyorised machine cleans heavy rotors
User Application Article Two stage conveyorised aqueous wash and dry machine is degreasing heavy steel generator rotors in a continuous and efficient manner at a rate of 90 parts per hour. Brochure Available
News from Guyson International (24 September 2003)
Patented teeth ensure hose clip holds on securely
One-piece, nylon 'double grip' hose clip features a patented double row of interlocking teeth to provide an extremely secure fit when tightened. Brochure Available
News from Anixter Components (24 September 2003)
ICICI Infotech gains Level 5 of SEI's CMM
ICICI Infotech has joined the elite list of organizations with the distinction of having Level 5 of the SEI's Capability Maturity Model for its offshore software development centre in Mumbai.
News from 3i Infotech (24 September 2003)
Bench-top meter/mix system dispenses accurately
Bench-top meter/mix system accurately dispenses shots of two-component epoxy, silicone or urethane materials for potting, encapsulating and bonding applications.
News from Integrated Dispensing Systems (24 September 2003)
Danish consultancy expands into Sweden
Specialising in engineering consultancy and establishing, rebuilding and optimising pharmaceutical production facilities, NNE has set up a Swedish subsidiary.
News from NNE (Novo Nordisk Engineering) (24 September 2003)
Digital PID autotune controllers are low cost
Low cost miniature digital PID autotune controllers, with their ramp control feature, make them one of the most versatile controllers on the UK market today, says the supplier.
News from Orchard Process Controls (24 September 2003)
Compact and tough servo motors offer more torque
A significant uprating of a servo motor family has resulted in the offering of up to 163Nm continuous torque and 278 Nm peak torque (approximately 15 KW).
News from Rockwell Automation (24 September 2003)
Software collects, reports, analyzes, distributes
For automatically interfacing to any data source, this software creates a report in Excel, turning the report into actionable information and then sends it to printers, email, file and web servers.
News from Sytech (24 September 2003)
Compact springs square up to high load demand
To meet the demand for compact springs that can handle high loads, specialist manufacturer has introduced a range of torsion springs formed from square section wire.
News from William Hughes (24 September 2003)
Multi-tasking mill turning centre attracts work
User Application Article Having placed the first UK order for a multi tasking mill-turning centre a subcontractor is now experiencing a very positive customer reaction to the shorter lead times made possible. Brochure Available
News from Yamazaki Mazak UK (24 September 2003)
Internal Part Numbering System Standard Announced
Design Chain Associates Announces Availability of Standardized Part Numbering System - the First in a Series
News from Design Chain Associates (24 September 2003)
Comtech collaboration announcement
Comtech to provide end-to-end M2M solutions based on Sony Ericsson M2mpower Business Solution.
News from Comtech M2M (24 September 2003)
DI launches new Asset tracking product
Diagnostic Instruments who produce the popular Di-225 range of rugged and versatile handheld computers has now added the Di-225-RFID (And Ex version) to their range.
News from Diagnostic Instruments (24 September 2003)
GDS introduces its industrial TFT range
Global Display Solutions (GDS), the world leader in the design and manufacture of industrial display solutions introduces its range of Industrial TFT (thin film transistor) displays
News from GDS (24 September 2003)
GDS is first to market with its displays
Global Display Solutions (GDS) is the proven market leader in the design and manufacture of industrial display solutions, boasting a back catalogue that is second to none!
News from GDS (24 September 2003)
GDS launches its latest 30 inch TFT display
Global Display Solutions (GDS), the market leader of innovative display solutions for industrial applications, announces the launch of its updated 30inch TFT Public Information Display (PID).
News from GDS (24 September 2003)
High brightness displays light up the kiosks
GDS, the world leader in the design and manufacture of industrial display solutions is set to make an impact on the kiosk market with the 'Mitra'
News from GDS (24 September 2003)
GDS introduces service support system
Global Display Solutions (GDS), the world leader in the design and manufacture of industrial display solutions introduces its Advanced Exchange Service Support System for ATM customers.
News from GDS (24 September 2003)
Sheet metal forming simulation is on the web
A leading developer of software for design and simulation of sheet metal components, has launched its re-designed web site with an improved user interface to help find information more easily.
News from Forming Technologies (23 September 2003)
Jobsite and silicon launch recruitment service
Jobsite.co.uk has announced a major new agreement with silicon.com under which Jobsite will provide a newly designed, co-branded 'Jobs-by-Email' facility through the silicon.com service.
News from Jobsite (23 September 2003)
Linear motion assembly withstands harsh elements
User Application Article High humidity, high temperatures and potentially aggressive water splash are the conditions a special linear motion assembly has to withstand in a NDT system. Brochure Available
News from HepcoMotion (23 September 2003)
Kitagawa Europe places collets order with Holmes
Machine tool and collet manufacturing specialist, Holmes UK has won its second major contract in six weeks, through the signing of an agreement to supply Kitagawa Europe with precision collets.
News from Holmes UK (23 September 2003)
Abrasive water jet cutting systems optimised
Abrasive management system provides the highest levels of accuracy, reliability and economy in continuous abrasive flow for water jet cutting.
News from Ingersoll-Rand (23 September 2003)
Five-station torque tool tester reduces test time
In order to increase the capacity and flexibility of its testing facilities torque testing and calibration instruments manufacturer has designed and built a five-station torque tool tester. Brochure Available
News from Norbar Torque Tools (23 September 2003)
Automatic pallet loader system sets the lean pace
For low volume, high mix workshops using CNC machine tools an automatic pallet loading system combines all the requirements for a lean operation.
News from REM Systems (23 September 2003)
Roller bearing catalogue is industry guide
Considered to be the industry-standard guide for rolling bearing and accessory design, selection and application, completely updated and revised edition of the SKF General Catalogue is available. Brochure Available
News from SKF UK (23 September 2003)
Mechanical handling upgrade sees new cranes
Efficient, reliable and accurate mechanical handling is critical so as part of a major plant upgrade, Alcan Packaging have invested in advanced cranes worth over GBP 500,000 over last 2 years.
News from Street Crane (23 September 2003)
Disc laser offers more power and better beam
The world's first four-disc laser generates a nominal 4kW of processing power to the workpiece but the maximum laser power attainable is roughly 40% higher. Brochure Available
News from Trumpf (23 September 2003)
Open matrix cabling systems announced
Addison Technology Limites invite prospective partners for their cabling business.
News from Addison Technology (23 September 2003)
New voice recording to e-mail program
Azam is a new software program that allows users to record voice messages, dictations, discussions, living diaries and meetings and Send Them By Email to other people without having to type.
News from Azam International Technologies (23 September 2003)
Latest generation of ERP Solution
Delta Business Solutions Limited have announced the latest generation of their successful software package Pyramid 3.0
News from Delta Business Solutions (23 September 2003)
Manchester tank uses PMC - Case study
User Application Article Manchester Tank and Equipment, a leading manufacturer of low-pressure vessels for North America and Australia, uses PMC for maintenance management.
News from DPSI (23 September 2003)
Celestial Seasonings uses PMC - Case study
User Application Article Celestial Seasonings, the largest seller of specialty teas in the United States, uses PMC for its maintenance management.
News from DPSI (23 September 2003)
Wisconsin state fair - Case study
User Application Article The Wisconsin state fair uses PMC for maintenance management
News from DPSI (23 September 2003)
Ajax Textile - Case study
User Application Article Ajax Textile Processing Company Ltd uses PMC to manage its maintenance.
News from DPSI (23 September 2003)
The Bacova Guild - Case study
User Application Article The Bacova Guild, a wholly-owned subsidiary of Ronile, uses PMC for its maintenance management
News from DPSI (23 September 2003)
Quebec City - Case study
User Application Article Quebec City uses PMC for its maintenance management
News from DPSI (23 September 2003)
Lantal Textiles - case study
User Application Article Lantal Textiles, based in Langenthal, Switzerland, uses PMC to manage its maintenance
News from DPSI (23 September 2003)
Lands' End - case study
User Application Article Lands' End use PMC for maintenance management
News from DPSI (23 September 2003)
GKN Sinter Metals - Case study
User Application Article GKN Sinter Metals in Ontario, Canada, uses PMC for maintenance management.
News from DPSI (23 September 2003)
Dallas Independent School District - Case study
User Application Article The Dallas Independent School District uses Fleetmaint for Maintenant management of its fleet.
News from DPSI (23 September 2003)
The City of Dublin, Ohio - Case study
User Application Article The City of Dublin in Ohio uses iMaint for its maintenance management
News from DPSI (23 September 2003)
Sonoco - case study
User Application Article Sonoco uses web based iMaint for Maintenance management
News from DPSI (23 September 2003)
New 'green screen' to web integration software
New Software Gives E-gif Electronic Service Delivery Projects A Kick-start
News from Flynet (23 September 2003)
BOXX Technologies Partners with SplutterFish
BOXX Technologies Partners with SplutterFish, Brazil Rendering System Now Available on XXtreme 3DBOX
News from SplutterFish (23 September 2003)
Appointment of Gary Meyer
Splutterfish Appoints Gary Meyer As Director Of Sales And Marketing
News from SplutterFish (23 September 2003)
ProSoft NetSPEX Chosen by the CADD/GIS Technology
User Application Article ProSoft NetSPEX CAD Standards Management Software Chosen by the CADD/GIS Technology Center and Its 14 Federal Partners September 16, 2003
News from ProSoft (23 September 2003)
PLM software latest release
Dassault Systemes and IBM Announce Version 5 Release 12 of their Product Lifecycle Management Portfolio
News from Dassault Systemes (23 September 2003)
AutoSEA2 2003 Announcement
ESI Group announces AutoSEA2 2003, a new version of noise and vibration simulation software ESI Group recently released AutoSEA2 2003 at the National Conference on Noise Control Engineering.
News from ESI Group (23 September 2003)
ESI / EASi collaboration announcement
ESI Group and EASi announce a strategic partnership with the integration of EASi products into the ESI Group crash and safety software portfolio
News from ESI Group (23 September 2003)
ESI Group / Ashland Casting collaboration
Ashland Casting Solutions and ESI Group to Offer Casting Simulation Software and Services.
News from ESI Group (23 September 2003)
EdgeCAM links with Pro/ENGINEER Wildfire
EdgeCAM computer aided manufacturing software is providing an associative link with Pro/ENGINEER WildfireT native data.
News from Pathtrace Engineering Systems (23 September 2003)
Pathtrace Announce Certification with SolidWorks
Pathtrace PLC announced today that SolidWorks Corporation has accepted it into the newly launched Certified CAM Product Program.
News from Pathtrace Engineering Systems (23 September 2003)
Stacking Machine Copes With Washers
The Elscint Stacking Machine is useful for stacking items like Bearings Cages and Bearing Washers or other components which need to be stacked in a production or assembly environment.
News from Elscint Automation (23 September 2003)
Going Dutch With The GTMA
Up to 12 participants from GTMA member companies may be funded on a fact-finding visit to selected toolmakers/precision machining companies in the Netherlands.
News from GTMA (23 September 2003)
Measuring Cleanliness of Surfaces In Hospitals
As hospitals come under increasing scrutiny in terms of their performance, there is growing pressure on Trusts to demonstrate commitment to providing the best care and environment for patients. Brochure Available
News from Oxoid (23 September 2003)
eBroadcast Event On LIMS Integration Sponsored
Thermo Electron has announced its active participation in and sponsorship of a major live streaming audio and video event entitled "Integrating LIMS Across the Enterprise". Brochure Available
News from Thermo Fisher Scientific Informatics (23 September 2003)
Communicating 2D Design Files with PDF
SolidWorks and Bluebeam Give Users Best of Both Worlds - Communicating 2D Design Files with PDF or 3D Models with SolidWorks eDrawings
News from Bluebeam Software (23 September 2003)
Airknife systems slash compressed air costs
User Application Article Significant savings have been made through improvements in the use and management of compressed air and through the installation of dedicated low-pressure blower-based Aiknives. Brochure Available
News from Air Control Industries (22 September 2003)
Tooling partnership to show new systems at EMO
A new tooling partnership will show high performance driven and static tooling, tooling presetters, modular boring systems, backspotfacing tools, and workholding systems at EMO 2003.
News from Bristol Tool, A Parlec Company (22 September 2003)
Steel product website also links up with ULSAB
Corus has launched a website designed to supply the latest product information for vehicle manufacturers and the automotive supply chain and with links to other steel industry sites. Brochure Available
News from Corus Group (Automotive) (22 September 2003)
Plastics chain and belt guides are wear resistant
High quality plastics chain and belt guides are wear resistant, self-lubricating and also water repellent, making them ideal for a wide range of industries.
News from Pennine Industrial Equipment (22 September 2003)
Digital infrared pyrometers offer quality
Digital infrared pyrometers offer a comprehensive features that provide the user with a quality measurement, a flexible and cost effective solution to temperature measurement problems.
News from Impac Infrared (22 September 2003)
Developing measurement and automation applications
A comprehensive suite of native classes and controls for developing measurement and automation applications in Microsoft Visual Studio.NET 2003 simplify I/O integration and interface creation. Brochure Available
News from National Instruments (22 September 2003)
Ultra-fine pitch test probe made for 0.5mm centres
An ultra-fine pitch test probe for testing components at centres down to 0.5mm (0.02in) is for testing boards using ball grid array, multi chip module and other fine-pitch packages.
News from Peak Test Services (22 September 2003)
Plastics sub-assemblies oust metals
User Application Article A new pneumatic suspension features replacing metal by plastics subassemblies relied on the optimisation of different injection moulding techniques.
News from Quadrant EPP (22 September 2003)
Bearing company selected again for Dow Jones'
For the fourth year in succession, SKF has been selected to be a member of Dow Jones' Sustainability World Indexes (DJSI World) and the European sustainability benchmark (DJSI STOXX). Brochure Available
News from SKF UK (22 September 2003)
Power drink required power packaging
User Application Article When a group produced a new energy drink, it needed a packaging solution that would ensure the powdered drink reached customers in excellent condition.
News from Bosch SIG Pack Systems (22 September 2003)
Rugged cylinders offer low weight, silent working
Pneumatic cylinders with rugged external design in anodised aluminium have internal parts of high grade engineering plastics to give low weight, soft end stops and silent operation. Brochure Available
News from Parker Hannifin (22 September 2003)
Two New Correa Machining Centres For Brookhouse
Two further Correa CNC machining centres have been ordered by Brookhouse Holdings plc, of Darwen to meet the increasing demand for precision tooling for the civil and military aerospace, automotive an
News from Brookhouse Holdings (22 September 2003)
Shearline Receives ISO Accreditation
Cambridgeshire-based Shearline Engineering recently received the revised ISO 9001:2000 accreditation for quality management systems.
News from Shearline Precision Engineering (22 September 2003)
Eg draws the crowds at Hampden Park
Delegates from Bournemouth to Edinburgh gathered at Scotland's national stadium, Hampden Park, earlier this week for eg's biggest ever focus group.
News from eg Solutions (22 September 2003)
Total number of news releases published during the week: 132
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000
