News releases on Manufacturingtalk categorised by date
Sunday 25 September
to Saturday 1 October 2005
Need to focus on core competencies for best IT
80% cent of customers surveyed across a range of industries in a recent end user study thought it essential to outsource key areas of the logistic function to an external partner.
News from Frost and Sullivan (30 September 2005)
Laser marking suits low volume production
Laser marking design team has built new versatile low cost , flexible laser marking solution that is affordable - priced at under GBP 20,000 - and is also economical to run.
News from Thinklaser (30 September 2005)
Flow wrapping machines gain European approval
Vertical flowwrapping machines suit a wide range of bagging applications from dried, powdered and granulated products such as rice, flour and coffee, to fresh bagged salads and produce.
News from Ulma Packaging (30 September 2005)
Interface your instruments to any LIMS
A full service is being offered for interfacing your instruments to any LIMS and can it also supply fully configurable integrated Instrument - LIMS and Instrument - CDS systems. Brochure Available
News from Autoscribe (30 September 2005)
Visualisation helps electrical machine manufacture
User Application Article The University of Birmingham has helped a company visualise a breed of superconducting electrical machines - including their manufacture in a pilot factory.
News from Vin Technology Services (30 September 2005)
Stand-alone stepper controller/driver saves costs
Cost effective stand-alone stepper controller/drivercan drive a 3A stepper, controlling three external devices such as solenoids, heaters, valves, etc., reading three general digital inputs.
News from Superior Solutions (30 September 2005)
How bending forklifts transform economics
Technical Background Article Each year, billions of pounds are still wasted in Britain through wrongly chosen materials handling equipment and logistics techniques, says Translift Bendi, which presents its ideas below.
News from Translift Bendi (30 September 2005)
Precision roller system eliminates backlash
Claimed to revolutionise linear drive systems, a precision roller system eliminates backlash and provides accurate positioning while operating at high speeds.
News from Nexen Group (30 September 2005)
Laser welding transparent, fluorescent polymers
User Application Article Laser welding system manufacturer now provides a system for the most complex applications of this technology - welding of optically transparent or fluorescent polymers. Brochure Available
News from Rofin-Baasel UK (30 September 2005)
Robotic router tools changed when operating
System for robotic routing systems allows tools to be changed while the routing system is in operation and offers an automatic update of tool parameters when a tool is changed. Brochure Available
News from KMT Robotic Solutions (30 September 2005)
Rotary valves meet high pharmaceutical standards
Rotary valves dedicated for use in pharmaceutical applications satisfy Occupational Exposure Levels, explosion and flame containment, and safe handling without compromising performance.
News from Rota Val (30 September 2005)
USB mini instruments have high signal accuracy
USB data acquisition devices now include a family of economical 'mini-instruments' for the USB bus that offer low price with high signal accuracy.
News from Data Translation (30 September 2005)
Tecnotion starts linear motor production in China
As well as setting up new linear motor production facilities in China, Tecnotion is moving its headquarters and automated manufac turing departments to a new site.
News from Tecnotion (30 September 2005)
System tracks progress of samples and work
A Windows based system that enables users to track the progress of samples and work and enhances traceability and accountability by automatically auditing all actions. Brochure Available
News from Autoscribe (30 September 2005)
Optical inspection system checks parts' presence
Automatic optical inspection system determines the presence and absence of components, checks solder joints and bridges and provides feedback to ensure placement accuracy.
News from Kaisertech (30 September 2005)
Dual hydraulic relief valves reduce space
Hydraulic screw-in cartridge valves offer the potential of condensing the majority of a machines' hydraulic controls into a single Hydraulic integrated circuit or manifold block.
News from Integrated Hydraulics (30 September 2005)
SKF names Dickson Bearings as maintenance partner
SKF has completed a deal with Dickson Bearings, making the bearing and power transmission specialist the first SKF Certified Maintenance Partner in Ireland. Brochure Available
News from SKF UK (30 September 2005)
Linear encoder made for hostile or clean use
Developed specially for operating in clean environments, a linear encoder is made for accurate positioning of workpieces in extremely hostile machining and cutting applications.
News from Newall Measurement Systems (30 September 2005)
Faraday Plastics urges industry partnership
Richard Simpson, director of Faraday Plastics, has called for a revitalisation of the UK academe/industrial relations in polymer science and technology.
News from Faraday Plastics (30 September 2005)
Sensing for servo motor repairs
User Application Article Reliability and robustness were the key requirements when Wyko Industrial Services set about building a test and calibration rig for its servomotor repair business in Aintree near Liverpool, UK. Brochure Available
News from Sensor Technology (30 September 2005)
Software monitors production and scheduling
Portola Packaging has ordered a software system to provide production monitoring and scheduling for their Doncaster plant, which manufactures caps and closures.
News from BarcoVision (30 September 2005)
Workers' rights enhancements to cost dearly
A whole new raft of laws enhancing workers' rights come into force on Saturday (October 1, 2005) that will cost Britain's smaller manufacturers dearly.
News from Forum of Private Business (30 September 2005)
Punch press tools fabricate special part features
Fabricators in need of special assembly tools such as louvers, shearbuttons, tapping extrusions and many others will find immediate delivery from stock service helpful in planning projects. Brochure Available
News from Mate Precision Tooling (30 September 2005)
Machinist boosts sales by 30% with new scheduling
User Application Article Manufacturing and production scheduling system is proving critical in controlling day-to-day events at a subcontract machinist to maximise production and deliveries.
News from Ward CNC Machinery (30 September 2005)
Latest milling and turning software at Fabtech
Significant additions made to a range of CAD Design Integrators include 3D surface/solid milling strategies, additional tools and wizards for handling and machining solid model design data.
News from Camtek (30 September 2005)
High-temperature bearings are self-aligning
A development of patented self-clinching and self-aligning bearings and high-temperature plain bearings are available in graphite bronze and Teflon bronze for high loads. Brochure Available
News from Unimatic Engineers (30 September 2005)
Motorsport customers benefit from joint response
User Application Article Tucked away in 24,000ft2 premises on the Heathfield Industrial Estate in Newton Abbot, Devon, UK, is an unusual example of a combined design and manufacturing expertise. Brochure Available
News from XYZ Machine Tools (30 September 2005)
Machine vision system checks piston rods
In the production line of a large car manufacturer an image processing system reliably identifies the position and type of differing piston rods having strong surface fluctuations.
News from Industrial Vision Systems (30 September 2005)
DMG EMO sales total 451 units worth EUR 87.4m
During the EMO 2005 exhibition the DMG Group sold 451 machines valued at EUR 87.4 million - it is the highest order intake that Gildemeister has ever recorded at a trade fair.
News from DMG (UK) (30 September 2005)
Remote PLC connection provides competitive edge
The ability to create a remote connection to equipment can provide great savings for many businesses, but where the equipment is maintained it can also vastly improve customer service. Brochure Available
News from LC Automation (30 September 2005)
Swedes see innovative position feedback encoders
A range of encoders will be highlighted at Scanautomatic, Sweden's only industrial automation and process automation exhibition, being held in Stockholm. Brochure Available
News from Renishaw (30 September 2005)
Compact O2 and O2/CO2 units analyse food packs
Two new compact gas analysers continuously monitor the oxygen and carbon dioxide content in food modified atmosphere packaging in line or intermittently.
News from Witt Gas Techniques (30 September 2005)
Twin linear modules give rigidity at high speed
Ideal for all types of high-speed handling and robotics applications, twin linear drive modules are fitted with two profile rail guides, each having two carriages. Brochure Available
News from SKF UK (30 September 2005)
Rotterdam Firm Integrates Enfocus Certified PDF
User Application Article Enfocus Software has announced that the use of Enfocus Certified PDF has been fully integrated into the day school and the custom school programs of the Grafisch Lyceum Rotterdam.
News from EnFocus Software NV (30 September 2005)
Verity soon to be available worldwide
Battelle teams with UK company to eliminate the fudge factor and bring breakthrough weld fatigue technology to the masses
News from Safe Technology (30 September 2005)
VariCAD 2005 1.12 Available
The release improves STEP file import, including much better import of the files created by systems using Parasolid
News from Varicad (30 September 2005)
New cutting CADCAM features
Jetcam to demonstrate new cutting CADCAM features at Fabtech 2005
News from Jetcam International (30 September 2005)
Remote PLC connection
Remote PLC connection can give your business a competitive edge. Brochure Available
News from LC Automation (30 September 2005)
Enterprise-level PLM technology for the mid-market
UGS has announced an aggressive and industry-changing strategy to serve the high-growth mid-market
News from Siemens PLM Software (30 September 2005)
Blue North Strategies Selects Dialogue
User Application Article Ability to Produce Targeted, personalised Customer Communications Differentiates Marketing Services Firm
News from Exstream Software (30 September 2005)
Tablet/capsule weight sorters on show
CI Electronics has introduced the new Sade SP Series of tablet/capsule weight sorters which are on show at Technopharm '05, Nurnberg from 11-13 October.
News from CI Electronics (30 September 2005)
Rheometer optimized for nano-torque control
A new addition to the Bohlin Gemini family of rheometers from Malvern is optimized for the control of ultra-low torques, and opens up new opportunities to probe weak or sensitive material structures. Brochure Available
News from Malvern Instruments (30 September 2005)
Dual measurement bench multimeter rack mounted
TTi (Thurlby Thandar Instruments) has redesigned the model 1705 multimeter to utilise the company's new 2U high bench-top case for which an optional rack-mount kit is available.
News from TTi (Thurlby Thandar Instruments) (30 September 2005)
Machine tool sump cleaner filters chips, sludge
Machine tool sump cleaning system can vacuum out chips, sludge and coolant and filter the chips and sludge from the fluid during the machining process and can pay back within 3-4 months..
News from Master Chemical Europe (29 September 2005)
Metalworking fluid specialist covers Benelux
A measure of the success of Master Chemical Europe's metalworking fluids in Benelux is the news that the company's distributor, Lion Oil, has just appointed a dedicated specialist for these products.
News from Master Chemical Europe (29 September 2005)
Koerber group holding companies cetralise
The holding companies of Koerber have been brought together under one roof to concentratie its competence, creating short communication channels and thereby improving efficiency.
News from Koerber Schleifring UK (29 September 2005)
Twenty four grinding machines displayed at EMO
At the EMO 2005 the Schleifring Group exhibited 24 grinding machines including a Studer single-pur-pose centre grinding machine for grinding chamfers and full angles on carbide metal blanks.
News from Koerber Schleifring UK (29 September 2005)
CNC grinder improves pump case quality
User Application Article Jan-Oliver Roehrl speaks to the Schleifring's 'Motion' magazine about the use of a CNC vertical spindle internal grinding machine at the Bosch plant in Czech Republic, to improve performance and produ
News from Koerber Schleifring UK (29 September 2005)
Metrology products website launched in Polish
Metrology company Renishaw, has launched a new Polish language website - that includes CMM probe systems, touch probes and laser tool setters - to support the growth of its customer base in Poland. Brochure Available
News from Renishaw (29 September 2005)
Compact probe head introduced for CMMs
Compact probe head for co-ordinate measuring machines offers low-cost 'motorised' head functionality and integral touch-trigger probe that offers the benefits of a motorised head system. Brochure Available
News from Renishaw (29 September 2005)
Aluminium-filled nylon introduced for SLS
Components in Alumide, an aluminium-filled Nylon material provide an alternative to Nylon, glass-filled Nylon or polystyrene - Alumide provides entirely 'new look' laser sintered components.
News from 3T RPD (29 September 2005)
Multi-directional lift trucks are versatile
User Application Article A pair of multi-directional lift trucks are providing versatile materials handling performance for a wide range of raw materials and finished products at a new factory opened recently in Birmingham.
News from Sidetracker Engineering (29 September 2005)
CAM software brings major savings to laser user
User Application Article Laser manufacturer makes major savings with 5-axis CAM software to supply formed metal and plastics components predominantly to the automotive industry for clients such as Ford, Toyota and GMH.
News from Camtek (29 September 2005)
Integrated mould tool CAD/CAM reduces costs
User Application Article Integrated mould tool design and production CAD/CAM software has reduced design time by over 30% and has considerably reduced manufacturing lead-times.
News from TopSolid'Cam (29 September 2005)
Electronics company reduces lead usage
Electronics manufacturer has voluntarily restricted the use of lead and other hazardous substances in its products by helping engineers design and develop environmentally friendly products. Brochure Available
News from National Instruments (29 September 2005)
Absolute displacement transducers redress balance
The dramatic improvements in the performance of data acquisition systems, control systems and instrumentation in recent years have frequently outstripped the performance of data transducers.
News from Solartron Metrology (29 September 2005)
Linear positioning reduces machine build time
Ready-integrated linear positioning system offers guaranteed performance, dramatically reducing machine build time and offers the performance benefits of linear motor technology. Brochure Available
News from Festo (29 September 2005)
Software produces variety of labels
Label printing software creates product labels, box end labels, build cards and print to different printers simultaneously and users can import EDI information directly from their customers straight t
News from GSM Printer and Label Systems (29 September 2005)
The lowest cost USB DAQ from Hytek Automation
The iUSBDAQ-U120816 is the lowest cost USB data acquisition module which provides eight 12-bit analog inputs, 16 digital I/O lines, two programmable pulse-width outputs and one 16-bit counter channel.
News from Hytek Automation (29 September 2005)
Cisco joins RFID Rapid Start Licensing Program
Intermec IF5 Reader First RFID Device to Meet Cisco Interoperability Test Criteria
News from Intermec Technologies (29 September 2005)
Intelligent Standby Capability for SQL Server
SonaSafe Backup and Recovery software provides an affordable easy to use replication solution for Microsoft SQL Server
News from SonaSoft Corporation (29 September 2005)
Aveva Helps Rebuild Devastated Business Community
User Application Article Aveva offers local businesses technical resources and engineering solutions to speed restoration of the Gulf's energy infrastructure.
News from Aveva Engineering IT (29 September 2005)
Total E and P Wins 2005 BE Award.
User Application Article Geospatial Index to E and P Documents Named Top Project in "Geospatial: Managed Environment" Category
News from Bentley Systems (29 September 2005)
New 4-axis/6-axis Servo/Stepping Motion Cards
4/6-axis Servo/Stepping Motion Cards Support real-time RTX drivers for various Industrial Automation Applications or Environments
News from Axiomtek (29 September 2005)
Catia V5 Brings Faster Time-To-Market
User Application Article The new ThinkPad Z60 with "roll cage" technology was designed with Catia V5, the same software used by worldwide industry giants such as Boeing, Airbus, Toyota and DaimlerChrysler.
News from Dassault Systemes (29 September 2005)
Universiy purchases 200 licenses of SolidWorks
User Application Article SolidWorks 3D mechanical design and Cosmos design analysis software prepare students for careers at global enterprises
News from SolidWorks Corporation (29 September 2005)
Packaging Moulding Growth Leads To Machining Buy
Precision toolmaker FSG Tool and Die has installed a new high precision Matsuura V.Plus-800 five-axis machining centre with vortex extraction system for graphite particle extraction.
News from FSG Tool and Die (29 September 2005)
Third UK Pack Test Firm Becomes Certified Lab
Packtest has become a certified test laboratory of the ISTA (International Safe Transit Association) (Lab No. ST-4624).
News from Packtest (29 September 2005)
Part Number System Makes Component ID Easier
UFP Technologies, the manufacturer of custom engineered packaging materials, has introduced its new PNP (Part Number in the Pocket) for positive component identification.
News from UFP Technologies (29 September 2005)
PrisymID delivers a secure solution
PRISYM Medica software ensures efficiency and regulatory compliance for pharmaceutical labelling and clinical trials
News from Prisym ID (29 September 2005)
Measuring sensors suit many industries
Highly reliable chain level measuring sensors are shock resistive, have an anti-stick float design and are available in a variety of lengths and materials.
News from Omron Scientific Technologies (28 September 2005)
Enforcement initiated over SL material patent
DSM Desotech has announced that enforcement has been initiated relative to a ruling that found 3D Systems' Bluestone filled stereolithography material infringes a co-owned DSM patent. Brochure Available
News from DSM Somos (28 September 2005)
Twin-head tube filler fills 10,000 tubes/h
A twin-head tube filler driven by a 5-axis servo system has a capacity to produce 10,000 tubes/h and it can handle two-colour or three-colour striping with ease.
News from Subnil Packaging Machineries (28 September 2005)
Laser sintering produces bicycle parts
User Application Article Selective laser sintering machines produced functional and aesthetically pleasing prototypes to assist Paul Wolfson in his final year of study in Industrial Design and Technology.
News from 3T RPD (28 September 2005)
Women overtake men on the promotion ladder
Research published recently shows that women in the manufacturing sector are getting ahead of men, enjoying promotion at a younger age.
News from Chartered Management Institute (28 September 2005)
Form measuring machine doubles accuracy
Form measuring machine more than doubles the accuracy in roundness measurements, improves straightness measurements and offers faster measuring speeds.
News from Mahr Federal (28 September 2005)
Universal measuring machine inspects high volumes
Universal measuring machine provides rapid, precise inspection of high-volume precision components and assemblies using integrated video, laser, touch probe measurement.
News from Mahr Federal (28 September 2005)
Station measures roughness, waviness and contour
Combined measuring station that covers roughness, waviness and contour saves time, space and resources and enables semi-automatic high-precision contour and roughness evaluation.
News from Mahr Federal (28 September 2005)
Measuring machine suits work cell use
Measuring machine provides rapid, precise inspection in work cell environments by integrating video, laser, touch probe measurement with industry-leading precision.
News from Mahr Federal (28 September 2005)
DRO has wide range of indicator features
Digital indicator features switchable inch/mm, selectable digital resolution, analog display range, dynamic measuring functions, tolerances and measuring direction.
News from Mahr Federal (28 September 2005)
Horizontal machining centre built ruggedly
New generation of rugged horizontal machining centres features massive cast-iron construction, with extensive internal ribbing on the castings to increase rigidity and damp vibrations.
News from Haas Automation (28 September 2005)
Transform the efficiency of compressed air dryers
Controller can significantly improve the energy efficiency of most types of heatless desiccant compressed air dryer to dramatically cut fuel bills.
News from Parker Domnick Hunter (28 September 2005)
Motorised height gauges made more affordable
Height gage (gauge) family Is motorised, automated and more affordable and offer a combination of features and performance previously available only in a higher price range.
News from Mahr Federal (28 September 2005)
3D measuring probe aids machine set-up
Available in both digital and mechanical versions, a 3D measuring probe provides machine operators with a fast, easy way to set up their milling and EDM machines.
News from Mahr Federal (28 September 2005)
Particle-free components prolong engine life
User Application Article The overriding priority when cleaning machined components is to manipulate them in such a way that critical areas such as deep galleries are flushed through thoroughly.
News from IB Industries (28 September 2005)
CAP to play critical automation role
As the organisation that sets the standard for automation, ISA's signature certification programme - Certified Automation Professional (CAP) - will play a critical role in the future of automation. Brochure Available
News from ISA (Instrumentation, Systems and Aut Soc) (28 September 2005)
Mobile computers and devices link with IT
Full product Line of vehicle mounted computers, rugged mobile computers, and handheld devices provide easy connectivity and ready-to-use features.
News from Advantech (UK) (28 September 2005)
Site surveys simplify chain stock management
Renold Chain is helping large manufacturers with stock management problems by conducting free site surveys of all the chain used on machinery within a plant.
News from Renold Chain (28 September 2005)
Communications module combines openness, security
Communications module combines unprecedented openness with unmatched safety and security, and provides safe and secure communications integration between safety systems and all popular DCSs.
News from Invensys Process Systems (28 September 2005)
SKF has become a main partner on the A380 project
SKF has become a main partner on the A380 Airbus project, meeting the most stringent requirements for the new super carrier. Brochure Available
News from SKF UK (28 September 2005)
ControlSoft announces SE Asia distributor
ControlSoft announces that Global Engineering Supplies and Services has become its new Southeast Asia distributor for INTUNE and MANTRA software.
News from ControlSoft (28 September 2005)
Offline programming suits pick and place
An offline programming station, suitable for the hybrid pick and place systems, enables the next run to be prepared without interfering with the current production run.
News from Kaisertech (28 September 2005)
Add-on accessories reduce set-up times
Five-axis machining is now available on XYZ Machine Tools' Mini Mill 560 compact vertical machining centre and four larger models of vertical machining centre. Brochure Available
News from XYZ Machine Tools (28 September 2005)
Radar gauges boost raw materials level measurement
User Application Article Following successful trials, which demonstrated a marked improvement in production efficiency, industrial plastics manufacturer is to install more radar level gauges.
News from Krohne (28 September 2005)
Save time when installing doors
Quick fixing pin system for hinge installation with a new cut out profile minimises material removal from the door flange, so maintaining door strength with flanges down to 28mm or even 20mm. Brochure Available
News from Emka UK (28 September 2005)
Omron establishes development centre in China
Automation, sensing and control technologies manufacturer, Omron, has established a development centre in Shanghai; operations are scheduled to start in October, 2006. Brochure Available
News from Omron Electronics (28 September 2005)
Website explains how to apply flowmeters
UK based Flowmeter manufacturer has launched a really user friendly website, to provide full information on a standard range of Oval gear, positive displacement, turbine and Pelton wheel flow meters. Brochure Available
News from Titan Enterprises (28 September 2005)
Successful controlgear contactor range extended
Following the successful launch of its range of controlgear up to 32A, the range has been extended to include new contactors and overloads up to 150A (75kW).
News from Moeller Electric (28 September 2005)
More scales added to hardness tester range
Indentec have extended the testing specification of their ]ZHV30 and ZHV1/2 Vickers hardness testers to include additional scales.
News from Indentec Hardness Testing Machines (28 September 2005)
Machining centre machines multi-surfaces
Latest high-speed, multi-surface machining concept demonstrates the advantages of 'one hit' machining and across a wide range of industry sectors, including toolmaking, aerospace and automotive. Brochure Available
News from Yamazaki Mazak UK (28 September 2005)
Course covers safety-related control systems
One-day course on maintenance of safety-related control systems is designed specifically to meet the needs of maintenance engineers.
News from Pilz Automation Technology (28 September 2005)
Study ERP benefits from individual computers
Manufacturers can now discover the benefits of ERP from the comfort of their own computer thanks to a range of products that is taking manufacturing software in a new direction.
News from Intuitive (28 September 2005)
Touchscreens and HMI software launched
Pro-face have announce the release of their NEW AGP3000 range of touchscreens and software - offering more functions and more power than before.
News from Pro-face UK (28 September 2005)
CAD/CAM machining software process speeds raised
Users of Vero's VISI-Series CAD/CAM, both existing and new, will benefit from increased productivity from faster toolpath creation and improved machining quality.
News from Vero International Software (28 September 2005)
Horizontal and vertical machining centres launched
A 5 axis horizontal machining centre, with a newly designed pallet exchange system and trunnion arrangement has linear/rotary scales that guarantee high accuracy and high metal removal. Brochure Available
News from Leader CNC (28 September 2005)
Automation design and assembly facility opened
Meeting growing market demands for more high-tech pre-assembled automation systems and control cabinets a manufacturer has opened a custom design and assembly facility in the UK.
News from Asco Numatics (28 September 2005)
Integrated system monitors, controls energy usage
An integrated automatic monitoring and targeting software system for energy, facilities, is designed for production managers in all sectors of industry, commerce and government. Brochure Available
News from Mitsubishi Electric Automation Systems (28 September 2005)
Non-contact torque sensor brings reliability
User Application Article Reliability and robustness were the key requirements for building a test and calibration rig for its servomotor repair business in Aintree near Liverpool. Brochure Available
News from Sensor Technology (28 September 2005)
Infrared thermal camera has high sensitivity
The exceptional thermal sensitivity and powerful new features of an infrared camera enable the professional thermographer to work with unprecedented efficiency and productivity. Brochure Available
News from Flir Systems (28 September 2005)
Stuttgart Fastener Fair brings in enquiries
Specialist single-source supplier of sheet metal fasteners as well as special-purpose turned and cold-formed parts, has gained a large number of serious enquiries at the Stuttgart Fastener Fair.
News from Northern Precision (28 September 2005)
Low-cost series controller runs 6, 12 zones
A low-cost series controller offers the latest in micro-processor technology, conveniently packaged in a small, robust steel case, is capable of running six or twelve zones.
News from DMS Diemould Service (28 September 2005)
Purge monitor improvements easeoperation
Improvements have been made to a purge monitor, targeted specifically at measurement of residual oxygen content in purge gas during welding of titanium and other alloys.
News from Huntingdon Fusion Techniques (28 September 2005)
CAM speeds production of pedal car protoypes
User Application Article CAM software enables lights-out machining to produce parts for prototypes - with reduced lead-times - of a 'Noddy' pedal car for Premier Pedal Cars. Brochure Available
News from Delcam (28 September 2005)
Safety gate switch is ATEX Certified
An ATEX Certified explosion proof safety gate switch is designed to control access to machinery and process lines operating in potentially explosive environments.
News from Fortress Interlocks (28 September 2005)
Turning centres complete machining in one hit
User Application Article Without doubt, the best solution in terms of productivity and feasibility is to proceed with the complete machining of the parts in a single chucking operation using one machining unit.
News from Tornos Technologies (28 September 2005)
Solid carbide cutter machines aluminium
A two flute solid carbide cutter has a 50 degree right hand helix, specifically designed for machining aluminium and will be shown at Wales and South West Manufacturing 2005.
News from ITC Tooling (28 September 2005)
Adaptable trollies handle cumbersome parts
Unusual, strange shaped, large or cumbersome items can be handled efficiently and safely in production, service and distribution environments using adaptable carts and trolleys.
News from Tube and Bracket Company (28 September 2005)
Sheet metal CAD/CAM ups efficiency
Advanced sheet metal CAD/CAM presents a new user interface with powerful filters, navigation options and a very intuitive and flexible work frame.
News from Lantek Sheet Metal Solutions (28 September 2005)
Fibre-optic connectors suit harsh environments
Fibre-optic connectors for harsh environments add fibre-optic capability to established range of rugged, compact connector hoods and housings - a cost-effective method of connecting optical fibres.
News from Harting (28 September 2005)
Software raises punch grinding productivity
Punch grinding machine achieves higher productivity with software upgrade that has the ability o accommodate up to 1000 elements in each individual step in the punch.
News from Anca Pty (28 September 2005)
Software improves tool making scheduling
User Application Article Investment in a new IT infrastructure with an emphasis on more effective production scheduling has also proved highly beneficial for a tool making company, as its use of scheduling software proves.
News from Preactor International (28 September 2005)
Gemba Solutions appoints Memex Electronics
Gemba Solutions appoints Memex Electronics as an Approved Implementation Partner for its OEE Lean Manufacturing Software.
News from Gemba Solutions (28 September 2005)
Drive system ups cold strip mill output fivefold
User Application Article A complete control system installed at Graham Perry Steels is delivering an increase in production of rolled steel from 80ft to 300ft per minute on a Schmitz cold rolling mill. Brochure Available
News from Eriks UK (28 September 2005)
SCARA robot has longest reach in class
SCARA robot has longest reach in class with a reach of 1050mm, which, together with a maximum payload capacity of 20kg, makes the robot one of the most versatile machines in its class. Brochure Available
News from TM Robotics (Europe) (28 September 2005)
SMD placement brings 'lights out' manufacturing
For SMD placement, new capabilities range from enhanced machine multifunctionality to full-functioned remote operation of multiple production lines for 'lights-out' work in the mid-volume sector.
News from Assembléon (28 September 2005)
Users benefit from ERP and eBusiness know-how
Flexible eBusiness solution for medium-sized businesses.
News from ABAS Software AG (28 September 2005)
Lotus Notes for new Palm Windows Mobile device
CommonTime has announced it's commitment to port Lotus Notes functionality to the hotly anticipated Palm Treo designed to run Microsoft Windows Mobile
News from CommonTime (28 September 2005)
ENlight Honoured at IDF Awards Programme
ENlight Honoured as one of two Finalists in the Storage Category at IDF Awards Programme
News from ENLight UK (28 September 2005)
Liaison in partnership with WebMethods
Liaison Technologies Signs Service Alliance Partner Agreement With webMethods
News from Liaison Technologies, LLC (28 September 2005)
Integration Tools for SAP MIC
Redwood Software and Approva Corporation Partner to Develop Sarbanes-Oxley Compliance Tools to Integrate with SAP Management of Internal Controls (MIC)
News from Redwood Software (28 September 2005)
Power Nurbs Advanced Creative Design Toolset
Advanced Modeling Core Brings Long-Awaited Surfacing And Solids Tools To Autodesk 3ds max Customers.
News from nPower Software (28 September 2005)
New Approach to Mobile Computing Security
VIA StrongBox software application enables VIA PadLock hardware security for bulletproof protection against identity theft and physical loss of data
News from VIA Technologies (28 September 2005)
The MathWorks supports LXI standard
The MathWorks brings Model-Based Design expertise to test engineering initiative
News from MathWorks (28 September 2005)
Moxa has set sail for maritime markets
Moxa's Marine Theme Site Targets Maritime and Offshore Markets
News from Moxa Technologies (28 September 2005)
DVDs help managers implement quality management
To help managers implement a quality management system and improve business processes, three DVDs are newly available from BSI Business Information.
News from BSI British Standards (28 September 2005)
Solderability tester for analysing small devices
The long established industry benchmark MUST solderability tester from Concoat has been improved to accommodate the enhanced test accuracy needs demanded by the smallest surface mount (SM) devices.
News from Gen3 Systems (28 September 2005)
Performance and ergonomics on thermography camera
HotShot represents a shift in thermography camera design and is an entirely new concept in industrial inspection data collection.
News from Electrophysics Corp (28 September 2005)
Plastic free glass electrodes
The use of glass capillaries as the diaphragm for pH measurement in strongly contaminated samples has proved itself for years in the 6.0235.100 Porotrode. Brochure Available
News from Metrohm UK (28 September 2005)
Titration controller optimises pH value
The 842 Titrando expands the Titrando system by adding the modes pH STAT titration and controlled dosing. Brochure Available
News from Metrohm UK (28 September 2005)
Videoimagescope systems in real time
August 2005 sees the introduction of the new Olympus IPLEX II series videoscopes. Brochure Available
News from Olympus Industrial (28 September 2005)
In-cell load cell amplifier
The SY014 in-cell load cell amplifier from Synectic Design is a high quality amplifier for the load cell signal.
News from Synectic Design (28 September 2005)
Tool supplier chooses print and pack system
Automated Packaging Systems, world leaders in high reliability automated packaging systems, has sold its flagship 'print and pack' bagging systems, to Joseph Gleave and Son. Brochure Available
News from Automated Packaging Systems (28 September 2005)
New Count and Weigh SystemsAccuCount 200
Automated Packaging Systems recently announced its new automatic counting system, the that provides complete flexibility, high accuracy and increased productivity. Brochure Available
News from Automated Packaging Systems (28 September 2005)
A fast and economical way to fill gaps
Automated Packaging Systems, the world leaders in high speed, flexible and reliable packaging solutions, has reported record sales of its recently launched AirPouch Express 3 Void-Fill System Brochure Available
News from Automated Packaging Systems (28 September 2005)
Bringing on manufacturing talent of tomorrow
A time bomb is ticking for North West manufacturers who are failing to engage the next generation of talent, warns The Manufacturing Institute.
News from Manufacturing Institute (28 September 2005)
High-speed CNC miller offers precision
High-accuracy, high-speed milling machine is appropriate for mould and die applications, which call for maximum precision and surface quality.
News from Sodi-Tech edm (27 September 2005)
Data translation features CAD-JT/JT-CAD
Latest release of data translation software features bi-directional CAD to JT and JT to CAD translation capabilities.
News from Theorem Solutions (27 September 2005)
Miniature end mill replaces EDM detailing
Solid carbide miniature end mill is for cutting deep ribs and the slotting in moulds, and also for machining deep corners and precision parts, normally done by EDM methods.
News from Hitachi Tool Engineering Europe (27 September 2005)
Ball end mill machines fine details, replaces EDM
Solid carbide miniature ball end mill has machines deep corners and precise details, as well as slots and ribs, which has conventionally been done with EDM methods.
News from Hitachi Tool Engineering Europe (27 September 2005)
Compact vertical machining centre is fast
Vertical machining centre with 3D-CNC offers an 8,000 rev/min spindle and a 20-tool magazine with double gripper, for short chip-to-chip times and high rapid traverse speeds.
News from DMG (UK) (27 September 2005)
Universal CNC miller cuts job times by 30%
Universal CNC miller includes 3 or 5-axis machining with a spindle head having swivel in B-axis for negative angles from -30 deg to +120 deg and cuts job times by 30%.
News from DMG (UK) (27 September 2005)
Ultrasonics machining made to high precision
Ultrasonic machining centre offers positioning accuracy +/-2.5 micron and repeat accuracy +/-1 micron and linear drives in X, Y, Z axes with accelerations up to 1.4G.
News from DMG (UK) (27 September 2005)
Mill/turn centre offers 25% cut in idle time
Turning centres offer counter spindle, driven tools and a Y-axis options as well as integrated spindle drive and fast-indexing servo turret, ensuring 25% cuts in idle times.
News from DMG (UK) (27 September 2005)
Tooling line improves job shops' throughput
Six new grades are designed to perform turning, milling and holemaking applications across a variety of workpiece materials and improve throughput in jobbing shops.
News from Kennametal UK (27 September 2005)
Face milling range offers high performance
Using inserts that offer excellent edge stability at high tooth loads -and secured by very strong clamping system, face mills will raise quality and reduce power consumption.
News from Kennametal UK (27 September 2005)
Through coolant drill removes 50% more metal
Featuring through coolant and advanced PVD multilayer coating on insert and body, drill combines centering, drilling, chamfering and countersinking into single operation.
News from Kennametal UK (27 September 2005)
Small, light gauges check details
A series of 20 different aluminium gauges for a German car manufacturer check whether important recesses and flush mountings are within predetermined tolerances.
News from Witte Gerätebau, Horst (27 September 2005)
Vacuum clamping designed for inspection use
Mostly used in milling or other machining processes,vacuum clamping is becoming extremely useful in measuring and checking processes because of its many configuration possibilities.
News from Witte Gerätebau, Horst (27 September 2005)
Ultra-compact CNC distributes intelligence
Cost-effective, ultra-compact unit is a fully-fledged controller-based CNC for managing up to eight axes in two NC channels and is intended for small machines, materials handling.
News from Bosch Rexroth (27 September 2005)
Electro-hydraulics upgrades mechatronics
Field bus-capable electro-hydraulic axes can further upgrade systems control modules for machine tools and significantly reduce design and commissioning effort.
News from Bosch Rexroth (27 September 2005)
Standardized circuits control machine functions
Application-specific, pre-fabricated hydraulic circuit solutions and controls for specific motion tasks reduce the engineering effort for manufacturers of machine tools.
News from Bosch Rexroth (27 September 2005)
Transfer machining systems drive down costs
Linear and rotary transfer high speed machining systems of various size and flexible CNC machines of different productivity and flexibility levels drive down production costs.
News from Mikron Machining Technology (27 September 2005)
Modular transfer machine speeds up changeover
Modular rotary transfer prismatic machining system offer almost endless configurations and are designed to considerably speed up product change-over times.
News from Mikron Machining Technology (27 September 2005)
Advanced paint system cuts emissions
Independent trials prove that an advanced paint mixing and delivery system reduces solvent use, cuts emissions and improves productivity.
News from 3M Marine, Aerospace and Specialty Vehicles (27 September 2005)
Free guidance on solvent emissions offered
Free guidance on solvent emissions reduction strategies for users of industrial volume cleaning equipment offered before October 2007 deadline.
News from 3M Electronic Materials (27 September 2005)
Hub lock devices eliminate backlash
Line of hub locking devices improve the connection of a drive component to a shaft and eliminate problems with backlash, keyway connections, and the limitations for QD and tapered bushings.
News from Climax Metal Products Company (27 September 2005)
Threaded fasteners designed for mouldings
Threaded fasteners and a complete range of installation equipment suit injection moulders, who need to install parts without special tools or fixtures.
News from Kerb Konus UK (27 September 2005)
Quality tools reduce injection mould times
User Application Article When a container manufacturer wanted decrease the production cycle times for an existing product, high quality moulds reduced cycle times by over 40%.
News from FSG Tool and Die (27 September 2005)
Clear adhesive/sealant has high flexibility
Optically clear, low viscosity, adhesive/sealant has high flexibility, features a forgiving one to one mix ratio by weight or volume and cures at room temperature. Brochure Available
News from Master Bond (27 September 2005)
SS tank manways include PED certified types
Specialist hygienic stainless steel fabricators, offer a comprehensive range of stainless steel tank manways which includes a new PED certified range with working pressures of up to 8 bar.
News from Axium Process (27 September 2005)
Security lobe knobs suit machine guards
Designed to provide a clamping/closing function coupled with simple operation and security, security lobe knobs suit machine guards, specialist tooling, location of jig components, etc. Brochure Available
News from Elesa (UK) (27 September 2005)
Strain gauge amplifier is compact
Surface mount intelligent strain gauge amplifier and weighing controller is a rugged, compact microprocessor based unit specifically designed for weighing operations. Brochure Available
News from Celsum Technologies (27 September 2005)
Continuous improvement saves GBP 160,000
User Application Article Continuous improvement at Dunlop Aerospace Fluid Dynamics saved the firm around GBP 160,000 last year in direct costs alone in factory floor operations, through lean and Six Sigma projects.
News from Exel Computer Systems (27 September 2005)
Intelligent sensor has simple set-up
'Second generation' intelligent sensor combines the simple set-up of a photoelectric sensor with the power of an image inspection system.
News from Panasonic Electric Works UK (27 September 2005)
MGB Electrical and Ensto collaborate in UK deal
Entso, manufacturer of ABS and polycarbonate boxes, mild steel and stainless steel enclosures, have appointed MGB Electrical as their main dealer in the UK for the complete product offering.
News from MGB Electrical (27 September 2005)
Digital comparator used on shop floor
Digital comparator Includes temperature compensation for shop floor use with high-contrast and backlit digital display flashes green/red for go/no go condition.
News from Mahr Federal (27 September 2005)
Measure form precisely on the shop floor
Form Measuring Machine delivers lab quality 3D and form measurements to the shop floor and its automated measurement and low uncertainty facilitate precision results.
News from Mahr Federal (27 September 2005)
Micrometers, calipers resist water
Water resistant digital calipers and micrometers are protected from dirt, temperature variations, and water spray during everyday use.
News from Mahr Federal (27 September 2005)
Brochure covers MIG/MAG/FCW welding
ESAB has published a new MIG/MAG/FCW Welding Equipment brochure that is available free of charge upon request. Brochure Available
News from ESAB (27 September 2005)
Software enhances robotic picking usage
A productivity enhancing software concept for high speed picking applications is a tool for a fast integration of robots with conveying product transportation belts and vision cameras. Brochure Available
News from ABB Robotics (27 September 2005)
Constant surface speed DRO improves lathe use
Constant surface speed digital read-out provides accurate control of manual lathes by providing constant cutting speeds, irrespective of the position of the cutting tool.
News from Newall Measurement Systems (27 September 2005)
Smallest linear encoder head introduced
Smallest linear encoder head's cylindrical body can be incorporated into OEM machinery designs with minimal alignment and assembly requirements.
News from Newall Measurement Systems (27 September 2005)
Metrology maker strengthens customer support
LK Group has expanded the customer support service for co-ordinate measuring machines - CMMs - that it provides to OEMs and subcontractors worldwide.
News from LK (27 September 2005)
High speed drill/polish at up to 125,000 rev/min
With an astonishing specification including spindle speeds of up to 125,000 rev/min, the high speed drilling machine is ideal for mould polishing, small hole drilling and fine slot machining.
News from Sodi-Tech edm (27 September 2005)
Purchasing team formed for electronics production
Remploy Electronics has created a Strategic Purchasing Team as part of a wide-ranging reorganisation of the contract manufacturing group's buying activities.
News from Remploy Electronics (27 September 2005)
Migros Vaud guarantees freshness with Aldata Gold
User Application Article Migros, the Swiss cooperative retailer is to implement version 5.03 of Gold
News from Aldata (27 September 2005)
Diamond Data 1.2.1 for Appforce introduced
Premier data quality and enrichment solution set to provide accurate, unified view of customers for salesforce.com clients
News from Trillium Software (27 September 2005)
E3D Interactive purchases RenderDrives
User Application Article E3D Interactive purchases RenderDrives for realistic architectural visualisation
News from ARTVPS (27 September 2005)
Jewel gains ITSO approval
Innovision Research and Technology's Jewel becomes one of first ITSO approved Limited Use media in the UK
News from Innovision Research and Technology (27 September 2005)
Zendor Wins Further Print Contract
User Application Article Zendor, the Manchester-based fulfilment expert, has been appointed by mail-order retailer Joseph Turner to print its Autumn/Winter recruitment insert.
News from Zendor (27 September 2005)
Autodesk UK User Conference
Autodesk UK User Conference Aims to Help its Manufacturing Customers Enhance Productivity and Realise their Ideas Brochure Available
News from Autodesk (27 September 2005)
Reduce your Testing Requirements
Autoscribe Sample Tracking and LIMS solutions enable you to save time and money by reducing your Testing Requirements based upon the number of samples of a specific product registered. Brochure Available
News from Autoscribe (27 September 2005)
Cimmetry Releases AutoVue 19
Setting the Standard for Collaborative Visualisation
News from Cimmetry Systems (27 September 2005)
Model library added to jewellery design software
The latest version of Delcam's ArtCAM JewelSmith software incorporates a new library of 3D component models, together with extra options to speed the design of new products. Brochure Available
News from Delcam (27 September 2005)
Accurate digital car model with Geomagic Studio
User Application Article Mega Bloks uses major carmakers' methods to design toy that replicates European rally car
News from Geomagic (27 September 2005)
Matlab project delivered ahead of schedule
User Application Article Cambridge Consultants uses Matlab to develop WiMAX test bench for Aspex Semiconductor
News from MathWorks (27 September 2005)
First Certified LabVIEW Architect
National Instruments and TBG Solutions Announce UK and Ireland's First Certified LabVIEW Architect Brochure Available
News from National Instruments (27 September 2005)
Low Power Consumption for NSA 1042
The NSA 1042 Network Appliance with Low Power Consumption and Versatile I/O configuration. Brochure Available
News from Nexcom UK (27 September 2005)
Solid Edge to support PARI's evolution to 3D CAD.
User Application Article India's Leading Industrial Automation and Robotics Company Standardizes on UGS' Solid Edge for its Design Automation Platform.
News from Siemens PLM Software (27 September 2005)
Sample tracking saves time and money
Autoscribe Sample Tracking and LIMS solutions enable saving of time and money by reducing Testing Requirements based upon the number of samples of a specific product registered. Brochure Available
News from Autoscribe (27 September 2005)
Tracking, step processing and events with software
Matrix Process Step Management provides for tracking samples through several stages of a commercial or laboratory process; Registration/Submission, Receiving, Preparation, Testing and Reporting. Brochure Available
News from Autoscribe (27 September 2005)
Wireless USB analyser supports standards
The Ellisys Explorer 300 Wireless USB analyser is the industry's first protocol analyser to support the Certified Wireless USB and WiMedia ultra wideband standards with data being taken over the air.
News from Computer Solutions (27 September 2005)
Free seminars on wastewater management
Hach Lange has issued an open invitation for anyone with an interest in wastewater to attend one of its free, one-day workshops at their new offices in Manchester.
News from Hach Lange (27 September 2005)
Evolution of fast PC data acquisition cards
The M2i series, introduced by Spectrum the specialist for fast PC data acquisition, is a new generation of A/D cards based on the MI series. Brochure Available
News from Spectrum Systementwicklung Microelectronic (27 September 2005)
Analytical workflow software ships
Waters Corporation has announced the shipment of Waters Analytical Workflow Manager Software 1.4.7.
News from Waters (27 September 2005)
Inkjets' Variable Coding Speeds Nestle Promotion
User Application Article Thanks to its installation of Domino continuous ink jet printers, flexible packaging manufacturer, Alcan Packaging, has completed the continuing KitKash promotional campaign.
News from Domino Printing Sciences plc (27 September 2005)
Luminescence Adds Aesthetic Appeal To Packs
Elegant yet functional packaging for the luxury market form the highlights of the DuPont Cosmetic Solutions exhibit at Luxe Pack 2005.
News from DuPont (UK) (27 September 2005)
New Head Of Worldwide Product Management
Karl Saueressig (52) is the new head of worldwide product line management at Heidelberg. He succeeds Bent Mortensen, who now heads the Asia-Pacific region for the company.
News from Heidelberg (27 September 2005)
Volumetric Filler Gears Olive Firm For Bigger Pack
User Application Article A number of major new contracts has lead to the purchase of Packaging Automation's Fastfill 60 by a company set up nearly 14 years ago.
News from Packaging Automation (27 September 2005)
Largest Recycled PET Trial In UK For M and S
User Application Article A trial conducted by Marks and Spencer in to post consumer recycled material (PCR) for food packaging has benefited from the production expertise of RPC Llantrisant.
News from RPC Containers (27 September 2005)
Printed Crowns Cap Quality Bottled Beers
User Application Article Viscose Closures of Crawley has started supplying printed crowns to Manchester (UK) brewery, Joseph Holt, which are being used across the company's range of individual bottled beers.
News from Viscose Closures Ltd (27 September 2005)
Assess cost savings, profitability on-line
A website highlighting the ability of Jobshop manufacturing and production control software to reduce operating costs and increase profitability has been launched by HRS. Brochure Available
News from Jobshop (27 September 2005)
Car progress sets future machine tool need
Technical Background Article Ongoing automotive power train, systems and structural materials and components developments may result in a future decline in demand for metal cutting machine tools, reports Mike Page.
News from CECIMO (27 September 2005)
New Foams from Zotefoams
Zotefoams' foam technologists have developed two new ranges of heavier density cross-linked block foams, which are to be marketed under the Hizote brand. Brochure Available
News from Zotefoams (27 September 2005)
Top frame innovation
Kaysersberg Plastics has introduced a new range of top frames that it claims is the modern way to unitise and stabilise pallet loads of empty cans, PET bottles and glass bottles.
News from Kaysersberg Plastics (27 September 2005)
Plastic Pallets for the Rigid Container Industry
Kaysersberg Plastics, part of DS Smith Plastics, has introduced a new generation of high durability plastic pallets; named RCM Pallets.
News from Kaysersberg Plastics (27 September 2005)
Belt-up for load stability and economy
Kaysersberg Plastics is introducing a new pallet, lid and belt system which it claims totally removes the need for non-reusable packaging, while providing outstanding load stability.
News from Kaysersberg Plastics (27 September 2005)
Combi-Pak Shows its Versatility
The Combi-Pak from Kaysersberg Plastics is a large scale, made to measure box pallet for carrying lightweight but bulky items.
News from Kaysersberg Plastics (27 September 2005)
Lifting the Lid on Uni-Pak
Uni-Pak from Kaysersberg Plastics, sets the standard for 3 piece, sleeve-pack type containers in a host of manufacturing industries such as automotive, engineering, plastic components etc.
News from Kaysersberg Plastics (27 September 2005)
Uni-Pak now has 'self contained' options
Uni-Pak, the popular Unit Load Container system from Kaysersberg Plastics is now available with fixed return collars that turn the pallet base, lid and sleeve system into a self-contained unit.
News from Kaysersberg Plastics (27 September 2005)
Plastic Pallet Kills Bugs.
HyRack, the high hygiene plastic pallet from Kaysersberg Plastics, is now available with an inorganic biocide incorporated into the actual material of the pallet to assist in pallet sanitisation.
News from Kaysersberg Plastics (27 September 2005)
New Wider Correx
The material for protective packaging Correx, from Kaysersberg Plastics, is a twin wall extruded plastic sheet material.
News from Kaysersberg Plastics (27 September 2005)
Nowhere to hide
In a new and radical approach to "High Hygiene" Kaysersberg Plastics has for the first time in Europe introduced HyRack.
News from Kaysersberg Plastics (27 September 2005)
Innovative gas detector switches between ranges
With Crowcon's Triple Plus+ IR gas detector, the purge vent gas from hydrocarbon storage tanks is monitored to detect when there is less than 100 per cent LEL equivalent flammable gas concentration. Brochure Available
News from Crowcon Detection Instruments (27 September 2005)
Scafftag Black Book complements forkliftag
With the HSE estimating that each year there are over 8000 accidents involving forklifts in the UK, Scafftag has helped prevent many more with its products, The Black Book and Forkliftag. Brochure Available
News from Scafftag (27 September 2005)
Intelligent toxic gas detector has ATEX approval
Offering protection against a wide range of hazardous industrial gases, as well as oxygen deficiency, the TS4000 intelligent toxic gas detector from General Monitors has received ATEX approval.
News from General Monitors (27 September 2005)
Mob caps, hairnets and beard snoods are detectable
E-Components and Chains (ECC) is launching a range of Detectamet metal detectable mob caps, hairnets and beard snoods for the food and pharmaceutical industries.
News from E-Components and Chains (27 September 2005)
Surface/profile grinder worked manually or CNC
Surface and profile toolroom grinder that offers CNC and manual operation will precision grind complex shapes, angles, radii and ultra flat surfaces quickly and easily.
News from Jones and Shipman Precision (26 September 2005)
Touchscreens simplify surface/creepfeed grinding
Claimed to overcome the shortcomings of traditional CNC systems, touchscreen programming on a surface/creepfeed grinder offers quicker changeover times, is very easy to use and is priced lower.
News from Jones and Shipman Precision (26 September 2005)
Analyse, evaluate quality data in real time
Powerful quality data management system with modular software analyses, evaluates and displays process and quality data in real time and provides interactive reports.
News from Carl Zeiss, Metrology Division (26 September 2005)
CMM readily integrates into machining cells
User Application Article CMM can be automated using robots, enabling it to be loaded and unloaded from three sides, thereby increasing the integration possibilities in interlinked production systems.
News from Carl Zeiss, Metrology Division (26 September 2005)
Measure surface and contour in a single process
Dual purpose measuring instruments that feature new detector and stylus systems capture surface and contour values with a single measuring run.
News from Carl Zeiss, Metrology Division (26 September 2005)
Flexible detector and stylus are fast tilting
Form measuring instrument, which permits highly accurate and very fast measurement of workpieces, has a manual rotary table that can accommodate workpieces up to 30kg.
News from Carl Zeiss, Metrology Division (26 September 2005)
DME and interfaces open door to CALYPSO
Several interfaces have been developed by Carl Zeiss that permit the use of CALYPSO CAD-based measuring software with CMMs from non-Zeiss manufacturers.
News from Carl Zeiss, Metrology Division (26 September 2005)
CNC form and surface measurements suit SMEs
A modular system with various table modules to automate CNC measuring processes gives SMEs the opportunity to improve their quality assurance and maximise productivity.
News from Carl Zeiss, Metrology Division (26 September 2005)
Measuring machines take over from fixtures
User Application Article At a printing machine manufacturer production measuring machines that are more flexible and cost-effective than traditional checking fixtures ensure that tolerances are met during production.
News from Carl Zeiss, Metrology Division (26 September 2005)
PCD gun boring tools have more blades
PCD gun boring tools have more cutting edges to enable higher feed rates, which then allow machining times and therefore cycle times to be reduced.
News from Mapal (26 September 2005)
Cutting tools maker reports positive development
The companies in the Mapal Group recorded positive development in 2004 with sales increased by 5% to EUR 225 million, despite difficult market conditions in 'old' Europe.
News from Mapal (26 September 2005)
Tangential roughing tools cut deeply
Multi-bladed tangential roughing tools fitted with replaceable blades provide stability and a soft cut when rough machining bores having distorted side wall angles.
News from Mapal (26 September 2005)
Tangential fine boring tools finish large bores
Tangential fine boring tools for large bores have reaming blades designed as twin-bladed, rhombic replaceable inserts and held in high precision seatings on the front of the tools.
News from Mapal (26 September 2005)
Containerised FMS automates machining centre
User Application Article A compact, containorised flexible workpiece pallet load/unload and racking system provided a quick and efficient way for an actuator maker to automated a machining centre.
News from Fastems Divisions, Helvar (26 September 2005)
Modular 'open' FMS handling can be modified
FMS for automated handling of machine pallets comprise modular mechanical elements and control/management software that are expandable to suit changing needs.
News from Fastems Divisions, Helvar (26 September 2005)
Minimised HMC vibrations raise machining quality
Minimised vibrations effected through dynamic FEM analysis of a horizontal machining centre's components ensure top performance in machining times and surface qualities. Brochure Available
News from Mori Seiki UK (26 September 2005)
Precision, performance helps markets grow
Recent years have seen Mori Seiki's dedication in Europe get off to a good start., with various sites set up and developed, and particular emphasis on direct sales in Germany. Brochure Available
News from Mori Seiki UK (26 September 2005)
Mori Seiki's NL CNC lathes top 2000
The NL Series lathes have been on the market for a year and that over 2,000 machines sold testifies their high stability, quality and flexibility, says Mori Seiki. Brochure Available
News from Mori Seiki UK (26 September 2005)
Mill/turn centre has HMC capability
Turning and milling are combined on an equal footing by essentially marrying a CNC lathe structure to a vertical machining centre structure for higher milling performance. Brochure Available
News from Mori Seiki UK (26 September 2005)
CNC automatics launched successfully at EMO
Using last week's EMO 2005 machine tool exhibition to launch its MultiDeco 20/6be and 20/8d, and the Deco 20s CNC automatics, Tornos reported a very successful show.
News from Tornos Technologies (26 September 2005)
Subcontractor adds on 6-axis waterjet profiler
User Application Article A six-axis robotic waterjet cutting installation, possibly the only one in the UK, is being used for cutting/profiling of thin plastics, composites and carbon fibre materials.
News from KMT Waterjet Systems (26 September 2005)
CNC sliding head auto cuts idle time by 40%
Latest mechanical engineering, control system development and operating software improvements have reduced idle time by 40% on a CNC sliding head automatic lathe. Brochure Available
News from Citizen Machinery UK (26 September 2005)
Collaboration software ups competitiveness
Injection moulding tool maker and moulder says exible CAD and collaborative PLM software has enabled it to manage development between our German and Czech sites.
News from CoCreate Software (26 September 2005)
Nano grinder raises productivity by 50%
For precision grinding, the Nano grinder is only one fifth of the size of a traditionally constructed one and enables productivity improvements of up to 50%.
News from Karolin Machine Tool AB (26 September 2005)
Injection mould tool software extended
Latest release of software for the 3D design of injection mould tools offers an extra wizard for design of mould locks and creation of stepped split surfaces in the Die Wizard. Brochure Available
News from Delcam (26 September 2005)
Gantry provides precise pallet positioning
User Application Article Custom-engineered work handling system for handling pallets for a new automotive engine aluminium casting impregnation line provides precise positional accuracy.
News from Gudel UK (26 September 2005)
Laser welds batch and R and D parts manually
Manual laser welding systems - including laser spot and seam welding and small batch production - process a variety of metals with low heat input and minimal distortion. Brochure Available
News from Rofin-Baasel UK (26 September 2005)
Micro-EDM die-sinker supplied with automation
Automated micro-EDM die-sinking machine offers contouring with the dynamic response of linear technology: including reducing electrode costs and accurate forms and shapes.
News from Sodi-Tech edm (26 September 2005)
Automatic cranes provide a smooth lift
User Application Article Two automatic process cranes, with an open frame winch and bucket, will move up to 15 tonne of material per lift and feature frequency inverters for smooth movement.
News from Demag Cranes and Components (26 September 2005)
UK power press builder is now independent
Following the re-establishgment of Worcester Presses as an independent company in April 2005, it has announced a successful first six months with orders across its range.
News from Worcester Presses (26 September 2005)
Horizontal machining centres ranked highly
Latest horizontal machining centres demonstrate superior cutting capabilities by processing CGI as well as versatility through having large part processing capabilities.
News from Cincinnati Machine (26 September 2005)
Mill/turn centres are large part multi-tasking
Multi-tasking mill/turn centres can turn large diameter workpieces complemented by a powerful machining (milling) spindle that enables five-axis machining in one set-up. Brochure Available
News from Yamazaki Mazak UK (26 September 2005)
Mill/turn centre aimed at small batch sizes
'All-rounder' mill/turn centre with two main spindles machines small batch sizes with a high degree of product diversity reduces the cycle times considerably.
News from Kingsbury Machine Tools (26 September 2005)
Precision running
Three members of staff from North Yorkshire engineering firm Claro Precision Engineering, have completed this year's Great North Run to raise thousands of pounds for two national charities.
News from Claro Precision Engineering (26 September 2005)
Making a Large Difference with Elcad
User Application Article Siemens drives require up to 5 electrical cabinets comprising diagrams with up to 1,000 sheets and Elcad is the CAE system for creating such diagrams Brochure Available
News from Aucotec (26 September 2005)
Elcad-fluid ideal for CAE systems
Elcad-Fluid Module for the Integration of Fluid Technology and Electrical Engineering Brochure Available
News from Aucotec (26 September 2005)
Plant Documentation Based on .Net
Aucotecview: First Web Service Solution for Plant Documentation Based on .Net Technology Brochure Available
News from Aucotec (26 September 2005)
Elcad Now Talks Unicode
Elcad version 7.3.1 supports all UNICODE (16-bit) based character sets such as Chinese, Arabic or Cyrillic Brochure Available
News from Aucotec (26 September 2005)
Ruplan and regional services
User Application Article Ruplan is used mainly for planning medium- and low voltage switchgears, water management and telecontrol engineering Brochure Available
News from Aucotec (26 September 2005)
Engineering Base in China
User Application Article Automatic device and signal numbering, the cross-reference technique and the outstanding software structure convinced Shanghai company to select Engineering Base Brochure Available
News from Aucotec (26 September 2005)
New Issue of BE Magazine
The new issue of BE Magazine, published by Bentley Systems brings readers highlights of the BE Conference 2005 experience.
News from Bentley Systems (26 September 2005)
Tool and die design with ICEM Surf at Audi
User Application Article Audi has implemented the ICEM Surf surface modelling, analysis and visualisation software suite as a tool for the virtual formation of drawn parts and as a medium for exchanging design information.
News from ICEM (26 September 2005)
ICEM cuts Product design and tooling times
User Application Article Convergence of ICEM surface modeling software technology, proven processes, manufacturing expertise and close teamwork, brings success for Eifel Mold and Engineering
News from ICEM (26 September 2005)
High resolution optical measurements
Aragon Photonics, developer and manufacturer of innovative all-optical solutions for high resolution measurements is proud to launch the enhanced version of the BOSA.
News from Aragon Photonics Labs (26 September 2005)
Instruments for surface coating industry
Brookfield will be exhibiting an extensive array of its instruments and accessories for research, development and quality control in the surface coating industry.
News from Brookfield Viscometers (26 September 2005)
Mechanical engineering decision-support software
Geomate has announced the release of GrafiCalc AT (advanced technology) software that combines the disciplines of sketching, calculations, analysis, and optimization in a single application.
News from Geomate (26 September 2005)
CCD remote head color camera
Toshiba Digital Solutions Divisionhas announced its smallest CCD remote head color camera model, the IK-UM44H.
News from Toshiba America Information Systems (26 September 2005)
2, 6-pin microfast cordsets and receptacles
Turck has expanded its line of microfast (1/2 - 20 UNF) cordsets and receptacles to handle even more applications with the addition of the 2 and 6-pin connectors.
News from Turck (26 September 2005)
New cellophane for yeast wrapping
Innovia Films has developed a new vibrant blue Cellophane film for wrapping fresh yeast to help bakers avoid product contamination.
News from Innovia Films (26 September 2005)
Total number of news releases published during the week: 276
News releases from 2009 2008 2007 2006 2005 2004 2003 2002 2001