News releases on Manufacturingtalk categorised by date
Sunday 11 November
to Saturday 17 November 2007
Lubricants cover stamping and tube bending
Stamping lubricants and tube bending lubricants for automotive and other heat transfer components include vanishing oils, thermally degreased oils, and semi-synthetic oils.
News from John Neale (16 November 2007)
Ethernet-based block I/O modules have processor
Ethernet-based block I/O modules perform analog I/O, digital I/O, and temperature measurement in an Ethernet network with Modus/TCP protocol at LAN, intranet or Internet.
News from Korenix Technology (16 November 2007)
Oil mist extraction solves grinding problem
User Application Article Found to be ideal for a heavy duty grinding machine an oil mist extraction unit uses centrifugal impaction to collect the oil mist and safely returning oil to the machine's reservoir.
News from Filtermist International (16 November 2007)
Vision sensor system inspects workpieces
An intelligent vision sensor system can be used without additional peripheral devices for practically all tasks in industrial image processing, including the inspection of workpieces. Brochure Available
News from Schunk Intec (16 November 2007)
3D rapid prototyping/manufacturing systems shown
Latest developments in 3D modelling, rapid prototyping and rapid manufacturing to be shown at Euromold 2007 include lase sintering of short production run plastics parts.
News from 3D Systems (16 November 2007)
ERP is designed for pharmaceutical manufacturers
ERP software, focussed on regulatory support and compliance, provides pharmaceutical manufacturers with increased lot control,identification, and tracking capabilities.
News from Technology Group International (16 November 2007)
EU Steel prices should recover In 2008
EU flat products producers are reported to be more optimistic for the first quarter of 2008 and hope that escalating raw material costs will help to boost market prices.
News from MEPS (International) (16 November 2007)
Material analyser identify alloys in under 2s
A range of handheld X-ray fluorescence material analysers use a simple 'point-and-shoot' operation to identify an alloy grade in under two seconds, five times quicker than before.
News from Niton UK (16 November 2007)
Metal producing products expertise expands
Manufacturer of high conductivity copper castings has built up considerable expertise in water-cooled copper products in very high temperature environments such as blast furnaces. Brochure Available
News from Corus Northern Engineering Services (16 November 2007)
Catalogue describes press shop tooling aids
Catalogue describes many press shop aids including ie lifters and clamps, to die handling and transport equipment, like die carts and push/pull systems.
News from Serapid (16 November 2007)
Materials testing succeeds at German plastics show
Materials testing machine builder, Lloyds Instruments, recorded 30% increase in sales leads at K-2007 plastics exhibition in Germany, compared with 2004.
News from Lloyd Instruments (16 November 2007)
Die casting machine company expands capacity
Die casting machine builder, Oskar Frech, has taken over the die casting business of Mueller Weingarten, extending machine capacity up to extends its capability up to 52,000kN (5,200 tonsf).
News from Frech (16 November 2007)
CNC laser cut tubes improve welding fit-up
User Application Article Fabricator said that laser-cut holes in cut-to-length tube always have the correct profile and are positioned correctly, so fit-up for welding is quick, easy and accurate.
News from BLM-Group UK (16 November 2007)
Quality management software raises throughput
Quality management software allows manufacturers to reduce nonconformance cycle times while increasing shop throughput and facilitating continuous improvement processes.
News from Visiprise (16 November 2007)
Random orbital sanders meet vibration directive
Designed from 'first principles', a range of air-powered random orbital sanders has good vibratory performance allowing workers to work comfortably for longer.
News from 3M Abrasive Systems Division (16 November 2007)
Planning future workforce is a big problem
When planning for future business, UK manufacturers reckon employee strategy is the most difficult part of any business plan, according to a commercial bank's survey.
News from Barclays (16 November 2007)
High speed camera has high resolution
For inspection purposes, a 1.4 megapixel, high speed camera offers 100 frames/s at full 1400 x 1024 pixel resolution and faster frame rates can be achieved through vertical windowing. Brochure Available
News from Firstsight Vision (16 November 2007)
Non-contact measurement can work in picometres
A non-contact displacement sensing system has modules, enclosures and sensors provides distance, digital and indexing measurement capabilities, in sub-nanometre resolution if required.
News from IBS Precision Engineering (16 November 2007)
Particle characterisation using image analysis
A range of glass calibration microspheres has been introduced to support of the increasing trend of using microscopy with image analysis to characterise particles. Brochure Available
News from Whitehouse Scientific (16 November 2007)
Toolholding developments shown at training days
A long established supplier of equipment provides power drawbars for steep taper tools, HSK clamping units, unclamping units, rotary unions and pull force gauges for power spindles.
News from Gewefa UK (16 November 2007)
SS conveyor helps maintain hygienic conditions
User Application Article Maintaining cleanliness in cereals manufacture means not relying on buckets and chains but using a stainless steel elevating incline conveyor instead.
News from Automation Supplies (15 November 2007)
Robots cut labour turnover at dairy products plant
User Application Article An automated robotic cell handles 150 picks/minute, ensuring that cheese blocks are moved quickly and precisely, one at a time, from one production location to another. Brochure Available
News from ABB Robotics (15 November 2007)
Employee vibration control consultancy offered
Consultancy has a broad experience in assessing vibration levels for a wide range range of equipment and carry out assessments for HAV and WBV for manufacturers in the UK and abroad. Brochure Available
News from AV Technology (15 November 2007)
Check up on CNC machining at UK Autosport show
A mill-turn centre with Y-axis tool turret action will demonstrate the versatility of a machine that has won many customers in the autosport engineering industries. Brochure Available
News from Yamazaki Mazak UK (15 November 2007)
Switch monitors several machine guards at once
A non-contact safety switch allows the simultaneous monitoring of several safety guards and up to 20 devices can be included in one switch chain.
News from Euchner (UK) (15 November 2007)
Large display HMI panel is a wide communicator
Two RS232 and two RS485 ports allow an operator interface panel, with a large 15in display, to communicate with virtually any serial device in the plant.
News from Red Lion Controls (15 November 2007)
Machining software speeds cylinder heads
User Application Article At the UK's Autosport Engineering 2008 event, a CAD/CAM provider will tell how a set of cylinder head ports can be machined, tested and installed, from a prototype, within one to two days. Brochure Available
News from Delcam (15 November 2007)
Brochure details instrumentation services
An instrumentation service brochure provides information to help equipment to continue to deliver optimum efficiency with minimal disruption throughout its lifecycle.
News from ABB Automation Tech (Instrumentation + Automation) (15 November 2007)
Voice input functionality added to data gathering
Voice input, RFID and bar code have been combined into a single software product to maximise data collection productivity through hands-free data collection.
News from Data Systems International (15 November 2007)
Low cost hardness tester has high specification
A digital Rockwell hardness tester a new, robust cast frame with a generous working space to help accommodate bulky specimens and converts data to HV, HB and other scales.
News from Bowers Metrology UK (15 November 2007)
CAD users offered integrated CAM
Users of SolidWorks CAD can now take advantage of a CAD-integrated CAM software that realises continuous process chains as the CAD and CAM systems access the same pool of data.
News from Open Mind Technologies UK (15 November 2007)
Patent awarded for innovative marking
A patent has been awarded to new transparent marking pigment, activated by low-power CO2 laser, for application on clear films or substrates.
News from DataLase (15 November 2007)
Flood damaged wire EDMs replaced quickly
User Application Article Areas of the UK suffered severe flooding in 2007 and a badly-hit EDM subcontractor had to replace its machines very quickly, aided by the UK subsidiary of a Swiss wire EDM machine builder.
News from Agie Charmilles (15 November 2007)
Universal material testing machines offer choice
To satisfy most applications and requirements for testing materials and components, four universal testing machines are available up to 5kN and in three height variations. Brochure Available
News from Zwick Roell (15 November 2007)
Manufacturing execution system covers all
User Application Article A manufacturing execution system will extend management visibility from ERP to shop floor, initially covering more than 20 locations to improve operations in production and supply chain network.
News from Apriso (15 November 2007)
EU SS and carbon steel price forecasts released
Latest MEPS forecasts show a decrease in some SS product prices and nickel prices continue upwards, while some carbon steel prices are also expected to rise.
News from MEPS (International) (14 November 2007)
Manufacturing, testing, evaluation site goes live
A leading defence systems company is offering a wide range of specialist design, manufacturing, testing and evaluation facilities, which are featured on its Web site.
News from Precision Solutions (14 November 2007)
Smart cameras offer image processing
Offering image processing directly on the cameras makes them suitable for applications such as locating parts, inspecting packaging, verifying assembly and reading 1D and 2D codes. Brochure Available
News from National Instruments (14 November 2007)
Business management system overhauled
User Application Article Motor racing company has invested in a high performance business management system to replace an aging text based business information system.
News from Exel Computer Systems (14 November 2007)
Inexpensive CNC woodworker starts business
User Application Article Low cost CNC woodworking machine accurately duplicates a CAD program in much less time than someone working by hand - an advantage which helped start up a business.
News from Micromech (14 November 2007)
Wheel and dessicant plastics drying combined
Combining the advantages of the twin bed desiccant dryer with those of the wheel dryer, a wheel dryer offers a constant dew point and extremely energy efficient operation.
News from Wittmann UK (14 November 2007)
Mould parting lock holds tool plates together
A design of mould parting lock offers a simple and effective way of holding tool plates together, which is particularly appropriate for three-plate tooling.
News from DMS Diemould Service (14 November 2007)
Temperature Measured accurately via the Internet
Two Ethernet-compatible Web-enabled temperature input devices allow users to take measurements and monitor them via the Internet.
News from Measurement Computing (14 November 2007)
On-line viscometer installs anywhere in minutes
An intelligent sensing system performs continuous on-line viscosity measurement in process control environments requiring high resolution and accuracy with excellent repeatability. Brochure Available
News from Hydramotion (14 November 2007)
Chinese metal producers order more automation
In a continuing drive to update rolling mills, Chinese ferrous and non-ferrous plants are ordering more automation systems including gap control.
News from Industrial Automation Services (14 November 2007)
Cleaner sucks up wet swarf, sludge, dust
A wet and swarf suction unit cleans up dust particles and granules, as well as swarf and their accompanying coolants and lubricants, wet industrial waste and sludge.
News from Flextraction (14 November 2007)
Smart ultrasonic sensors have long range
Long range ultasonics sensors use the latest microprocessor technology to provide low cost precision non-contact distance measurement for factory automation. Brochure Available
News from Vydas International Marketing (14 November 2007)
Guide makes right conveyor selection easier
As well as making conveyor selection easier, a Conveyor Selection Guide details advantages such as lubricated-for-life bearings and downloadable 2D and 3D CAD models.
News from QC Industries Conveyors (14 November 2007)
OD wheels grind hard/'exotic'/tough alloys
Two ranges of external cylindrical grinding wheels have been introduced for large volume production of components from difficult materials such as hardened steel and tough exotic alloys.
News from Tyrolit (14 November 2007)
Short toolholder frees up machining space
Latest hydraulic expansion toolholder is extremely short and clamps the cutting tool directly in the mounting taper, to give more space in the machining area. Brochure Available
News from Schunk Intec (14 November 2007)
One workholding unit grips different diameters
To grip components of different diameters needs only one set of grippers for holding items like gear box shafts, shock absorber rods and exhaust tubes.
News from FS Engineering (14 November 2007)
Vertical machining centre has swivelling head
A 5-axis vertical machining centre features a thermally stabilised head with motor spindle that swivels about the B-axis, while the fifth CNC axis is provided by a horizontal rotary table. Brochure Available
News from Hurco Europe (14 November 2007)
Temperature measurement guides are on-line
A single page temperature sensor guide published on-line is designed to direct a user towards the right choice of a temperature sensor and is supported by a 'white paper'.
News from Ametek Calibration Instruments (13 November 2007)
Modular assembly line accepts quick alterations
User Application Article While installing a modular assembly line to produce cartridge valves, the user asked that a solenoid actuator be assembled and tested in the same line, which was done thanks to line modularity. Brochure Available
News from Zwick Roell (13 November 2007)
Integrated ERP improves aerospace competitiveness
User Application Article Manufacturer of complex composite and metal bonded structures and assemblies for military and commercial aerospace applications has installed integrated ERP to improve competitiveness.
News from Visibility (13 November 2007)
Bi-directional antenna for RFID is compact
A low profile, ceiling-mount bi-directional antenna is compact and is specified to cover the 2.4 to 2.5GHz frequency band, for systems integrators installing WiFi or RFID.
News from Admiral Microwaves (13 November 2007)
Automated cell brings machining back in-house
User Application Article Close partnerships between a diesel engine manufacturer, a robotics supplier and a machine tool company resulted in an 'in-house' automated cylinder head machining cell. Brochure Available
News from Fanuc Robotics (UK) (13 November 2007)
Automation firm offers free guide to robot payback
A free guide offers a simple equation for payback on robot installation and also has a number of case studies intended to illustrate the theory the guide outlines. Brochure Available
News from TM Robotics (Europe) (13 November 2007)
Thread milling software eliminates 'guesswork'
Software is designed to quickly provide thread milling users with accurate and correct tool selection as well as the appropriate machining data and G Code programs for all popular CNC systems.
News from Vargus Tooling UK (13 November 2007)
Lasers weld and cut sheet and foils faster
Laser systems for welding and cutting thin metal sheet or foil materials are faster, simpler to use and and can be used in either pulsed or continuous wave mode. Brochure Available
News from Rofin-Baasel UK (13 November 2007)
Plastics serial tests automated at any time
Robotic specimen feeding systems for materials testing machines are used in research and development for cost-effective testing of large numbers of specimen. Brochure Available
News from Zwick Roell (13 November 2007)
Replacing HCFC in aerospace applications
Stowlin Croftshaw has introduced a high performance solvent cleaner that will remove difficult soils in open-top and vacuum vapour degreasers. Brochure Available
News from Stowlin Croftshaw (13 November 2007)
Build expandable Ethernet architecture
In setting up Ethernet systems architecture, a Taiwanese company said it is important to use systems that offer future expansion as Gigabit connections may be wanted at critical connections.
News from Ethernet Direct (13 November 2007)
Automated tube bending cell is world's smallest
A robotic tube bending cell, claimed to be the world's smallest, can fabricate thousands of parts/day for running cost of around EUR 7 for mass production of items like automotive parts.
News from Unison (13 November 2007)
Two-hand machine actuation simplified
A bar-type control system minimizes the possibility of defeat and accidental actuation, and its ergonomic design reduces hand, wrist and arm stresses associated with repeated switch operation.
News from Banner Engineering (13 November 2007)
Latest ERP improves business functionality
User Application Article A water treatment equipment manufacturer has updated its ERP with a system that brings business-specific functionality, including: data management; order quote generation and product traceability.
News from Infor (13 November 2007)
Weighers manage small packs up to 500g
Two recent versions of advanced multihead weighers are designed for the fast and accurate weighing of small target weights in the 5g-500g range.
News from Ishida Europe (13 November 2007)
In-process QC made on CNC sliding head lathes
User Application Article Subcontractor has developed a measuring system for real-time, in-process quality control of components on CNC mill-turn sliding head automatic lathes.
News from Star Micronics GB (13 November 2007)
Machine tool purchase finance is still there
In spite of the ongoing turmoil in the world's credit markets there has not been much evidence that it is adversely affecting machine tool purchasing, said the MTA.
News from Manufacturing Technologies Association (13 November 2007)
Subcontractor gains ISO 9001 BSI accreditation
A UK subcontractor suppling zinc diecastings, metal stampings and assemblies is expanding outside of its usual markets and has gained ISO 9001 BSI accreditation.
News from Brunel (13 November 2007)
Laser marking systems technology advances
At EMO 2007, laser marking equipment manufacturer, launched the latest developments of its proprietary laser marking system, which offers more memory and faster operational times. Brochure Available
News from Electrox (12 November 2007)
Grip difficult work pieces from within
Once a machine part needs to undergo 'second operation' work, its complexity can provide work holding problems, but an internally operating expanding clamp could be the answer. Brochure Available
News from Elesa (UK) (12 November 2007)
Modular machining centres mill at high speeds
Modular machining centdfes can be built up to 8m by 40m (X and Y axis) to order for machining large aluminium or composite components in the aerospace, automotive and marine industries.
News from CMS Group (UK) (12 November 2007)
High speed machining centre works on alone
Long after the employees have left the plant, this high speed CNC milling machine - equipped with linear motor axes drives - carries on producing, said the manufacturer.
News from Sodi-Tech edm (12 November 2007)
Tangential cutter mills corners and faces
For universal use, a tangential milling cutter can be used with just one basic tool body for corner or face milling operations in aluminium or cast iron.
News from Mapal (12 November 2007)
Small CNC lathe has Y-axis and sub-spindle
For the complete machining of small parts, in batches of 50 to 5,000-off, a high performance, competitively priced universal lathe has a Y-axis and a sub-spindle.
News from HK Technologies (12 November 2007)
Stop compressed air leaks and save energy
An 1/8in air leak in a compressed air pipe at 100 lb/in2 can add around GBP 1,600 to a factory's annual energy bills, so the costs of identifying and rectifying leakages are easy to justify.
News from Monition (12 November 2007)
Reduce compressed air energy cost by 40%
Compressed air services company said that energy accounts for almost 80% of the total lifecycle cost of a compressor and it can reduce this energy cost by up to 40%.
News from Ultra.Air Group (12 November 2007)
Nano-precision stages operate under vacuum
Nano-precision, UHV compatible positioning stages meet the toughest specification that are often further complicated when the management of motion is in a vacuum.
News from Micromech (12 November 2007)
Gather PLC, PC and ERP data in real time
Real time performance management software gathers data from PLCs, PCs, DCSes and historians, as well as ERP programs, MES and WRP software and defines KPIs.
News from InduSoft (12 November 2007)
Automating electrical testing systems
John Barnett describes how the integration and automation of electrical testing systems can enhance production control and quality assurance in modern manufacturing processes. Brochure Available
News from Clare Instruments (12 November 2007)
Electronics components/systems catalogues released
There are more than 1200 innovations among 18,000 electronic components listed in the latest range of catalogues including industrial connection, cabling, surge protection, automation and so on.
News from Phoenix Contact (12 November 2007)
Cutters machine carbon fibre/metal matrix
Among exhibits at the UK's Autosport exhibition in 2008 will be a PCD range of cutters for carbon fibre and metal matrix machining and a series of roughing tools.
News from ITC Tooling (12 November 2007)
Encoder interface has serial communications
Latest encoders for use in gear-driven and direct-drive rotary axes feature FANUC serial communications direct from the encoder for higher performance and easier connectivity. Brochure Available
News from Renishaw (12 November 2007)
Automation company joins robotics supplier
A company that provides bespoke automated systems for different industries including the food industry and the cement and steel industries is now an ABB Robotics partner.
News from Automation Supplies (12 November 2007)
Brass parts machining costs reduced by 15%
User Application Article Subcontacting machinist reports that it has achieved a 15% cost reduction in machining a family of brass components by using a CNC mill-turn centre and recommending a small design change.
News from Qualiturn Products (12 November 2007)
Foundry desanding and blast cleaning is continuous
User Application Article A continuous spinner hanger shot blast machine offered a steel foundry high performance/productivity in relation to the price to process castings weighing from 50 to 10,000kg.
News from Rosler Oberflaechentechnik (12 November 2007)
PVD inserts mill of SS, titanium, Ni alloys
A high-speed milling cutter fitted with trigon inserts can be supplied with PVD Tiger.tec inserts grades for milling stainless steel, titanium and nickel-based alloys.
News from Walter GB (12 November 2007)
Linear actuators have higher resolution
Hybrid linear actuators are now available with a 0.9 deg step angle for higher resolution and allows for a full step linear movement of 0.0000625in (1.6 micron).
News from Haydon Motion Europe (12 November 2007)
Total number of news releases published during the week: 89
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000
