Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: ABB Automation Tech (Drives and Motors) | Subject: Proportional-Integral-Derivative controller
Edited by the Manufacturingtalk Editorial
Team on 21 September 2004
Closed loop control saves wheel maker
50% energy
Steel wheel maker is achieving unprecedented energy savings - some 50% saving - by applying closed loop control to an existing variable speed drive installation.
Steel wheel maker, Magnetto-Topy is achieving unprecedented energy savings by applying closed loop control to an existing variable speed drive installation The original installation saved the company some GBP 23,000 per year in energy
This article was originally published on Manufacturingtalk on 25 Jun 2001 at 8.00am (UK)
Related stories
Weekend fan parts search saved chipboard output
Tens of thousands of pounds worth of lost production at chipboard manufacturer Sonae Industria, Merseyside, has been saved by ABB Drives Alliance Partner Central Electrical.
ABB drives range extended
ABB has extended the range of one of the key elements in its ACS 600 drives range, by introducing new IGBT Supply Unit frame sizes.
But an additional 50% energy saving has now been achieved by applying closed loop flow control, using water temperature as the control variable.
A PID controller is inserted within the control loop so that the loop can be tuned to ensure stable and accurate control with good response times.
Because the PID controller is built into the ABB drive, the benefits of closed loop control can be realized without the additional expense of external control equipment.
Further reading
ABB launches tour of Technology Days
A series of Technology Days has been launched by ABB, held in conjunction with its Channel Partners at venues across the UK.
World's first personalized drives Web site is up
ABB launches world's first personalized motors and drives Web site to reduce costs, errors and time.
A PID (Proportional-Integral-Derivative) controller is a universal type of controller that helps eliminate any error and improve steady state performance, as well as improve dynamic performance.
Magnetto-Topy use four drives, rated from 37 to 55kW, on water pumps within four cooling towers that supply water to the wheel making process.
Before installing variable speed drives, the company used star-delta switching which turned the pumps on or off.
Thus, the pumps were left running at full speed on 50Hz.
With drives fitted, the company can reduce the running speed on a 55 kW pump to 35Hz, resulting in a 53% energy saving.
A further assessment showed that by applying closed loop control, the energy consumption could be reduced by an additional 50%.
But Magnetto-Topy was cautious about further slowing the pumps, because of the risk presented by legionella bacteria, which can spawn in cooling towers.
To prevent this, a continuous water flow is essential.
Along with water flow, the water temperature needs to be maintained at a maximum of 20 deg C to prevent the growth of legionella bacteria.
Changing the water flow rate can also affect the water temperature.
So the system was tuned for these worse case conditions, which normally only occur during the summer, when the water temperature reaches its 20 deg C maximum.
But during the winter months when the water temperature is naturally cooler, there is an opportunity to slow the pumps down even further.
This is where PID control comes in.
A transducer is placed into the water tank and this feeds the temperature measurement back to the drive.
So at 20 deg C, the drive is running at 40Hz.
As the temperature drops to 13 deg degrees C and below, the drive runs at 25Hz.
As the temperature of the water rises, the pump speeds up and allows more water to cascade over the cooling tower.
"The result is that with PID control, the energy bill has been halved yet again," says Phil Smith, Maintenance Service Administrator.
"PID control is a compensatory control method.
Without it we have to cater for the worse case which means running pumps at 40Hz, which is the summer setting.".
• ABB Automation Tech (Drives and Motors): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
