Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: ABB Automation Tech (Drives and Motors) | Subject: Generators
Edited by the Manufacturingtalk Editorial
Team on 15 March 2007
Generators capture wave power
ABB generators are one of the essential components of the Pelamis Wave Energy Converter, designed by Edinburgh based Ocean Power Delivery.
ABB generators are capturing power from the waves in the world's first commercial wave power generation project The ABB generators are one of the essential components of the Pelamis Wave Energy Converter , designed by Edinburgh based Ocean Power Delivery (OPD)
This article was originally published on Manufacturingtalk on 14 May 2003 at 8.00am (UK)
Related stories
ATEX directive use of motors detailed on CD-Rom
ABB has launched a CD-Rom containing information associated with the forthcoming ATEX Directive, on the marking and uses of motors and generators in hazardous areas.
Carbon footprint calculator reveals motor savings
ABB has introduced an on-line calculator designed to help minimise the 'carbon footprint' of electric motors such as by using variable speed drives.
The first commercial wave farm project at Agucadora off the coast of Portugal will be operational during the coming months and will supply power for around 1,500 Portuguese homes.
The OPD Pelamis is a semi-submerged, articulated structure composed of cylindrical sections.
Three of the sections are designed as power modules, with two ABB 125kW generators in each section.
Further reading
Electric drives replace pneumatics at steel plant
One of the main benefits of replacing a pneumatic positioning system at a steel plant with electrical drives reliability, as the steelmaker said it does not have to keep adjusting them.
Catalogue describes drives and motors
A 44-page drives and motors catalogue provides technical details on low voltage AC drives from 0.18 to 2,800kW and motors from 0.06 to 710kW.
Variable speed drives cut air handling costs
Variable speed electric motor drives has reduced the cost of providing air circulation at commercial/industrial units from GBP 180/week to GBP 50/week.
This allows for a high degree of fault tolerance and gives a total power output for the Pelamis of 750 kW.
Power modules are linked by hinged joints.
The wave-induced motion of these joints is resisted by hydraulic rams, which pressurise the hydraulic system.
Hydraulic motors are used in turn to drive the ABB electrical generators to produce electricity.
Power from all the joints is fed down a single umbilical cable to a junction on the sea bed.
Several devices can be connected together and linked to shore through a single seabed cable.
ABB was selected because of its willingness to meet the needs of OPD.
Steffi Anderson, Electrical Systems Engineer with OPD, says: "ABB came on board when our previous generator supplier could not meet our needs.
We needed a generator with a high IP rating, IP 67 and ABB had a new sealing system it had designed for motors on the decks of ships.
ABB provided a prototype generator at a low cost and was very keen to be part of the project." Much of the ABB work was performed at the ABB motor plant in Vaasa, Finland.
ABB was also prepared to adapt its products to suit OPD's space constraints in the modules.
It reduced the frame size of its generator from 315 to 280, cutting the weight from 860 kg to 725 kg.
Says Anderson: "This was a great help because the lower frame size meant the generators were easier to install in the power modules, where space was at a premium." ABB also adapted its power connections, moving from a cable box to a system using flying leads in order to make it easier to connect the generator to the switchgear panel.
Derek Robinson, ABB's Production Manager for cast iron products, says: "Renewable energy is a major focus for ABB and we were glad of the chance to work with OPD to help them develop their wave energy generators.
Our goal now is to help reduce the cost per kilowatt-hour by engineering out costs, improving efficiency and reducing sizes and stress." Anderson added: "ABB were very easy to work with and were very willing to adapt their products to meet our needs.
We envisage building larger versions of the wave energy converter that will use four power modules and so incorporate eight generators.
We expect to have a number of projects underway in the near future, including sites in the Orkneys and in Cornwall, so ABB could be supplying us with as many as 40 generators for this new work.".
• ABB Automation Tech (Drives and Motors): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
