Product category:
Paint and painting systems
News Release from: ABB Robotics | Subject: ABB paint robots
Edited by the Manufacturingtalk Editorial
Team on 23 August 2001
Injection moulder installs painting
robots
Plastic injection moulding experts Rosti (Scotland), based in Larkhall near Glasgow, installed its first ABB paint robots in 1994 to evaluate their merits against manual spraying.
Injection moulder installs six painting robots Plastic injection moulding experts Rosti (Scotland), based in Larkhall near Glasgow, installed its first ABB paint robots in 1994 to evaluate their merits against hand spraying methods Two IRB 510 robots - for which a purpose-built extension to the plant was built - were acquired as a measure to improve both productivity and quality on conductive surface finishes, which, at the time, were difficult to apply by hand spraying methods
This article was originally published on Manufacturingtalk on 27 Apr 2004 at 8.00am (UK)
Related stories
Controller directs four-robot coordination
Fifth generation robot controller represents the biggest technological step forward since the introduction of the first generation series in 1974, says robot builder.
ABB appoints new Scottish Motor Service Partner
ABB has appointed EDC (Electronic Drives and Controls), in Dalry, south of Glasgow, as the new ABB Motor Service Partner for Scotland.
The installation was an outstanding success, doubling productivity and improving quality to such an extent that seven years on, ABB paint robots are the standard by which Rosti measures all its automated paint processes.
The Rosti plant at Larkhall offers a total moulding process capability to its customers, as well as additional processes such as RFI/EMI Shielding, high volume cosmetic painting, printing, and assembly.
Technical Team Leader for the Paintshop and Assembly Areas, Scott Simpson, was one of the first to be trained in programming and operating the original robots: "In 1994, robot-equipped paintshops were quite 'state-of-the-art' and it was a bold move by the company in investing in this technology." "With the new robots installed, however, we rapidly upped productivity and quality, which in turn made us more competitive, and this in itself brought in more work.
Further reading
ABB launches energy saving hotline
ABB has launched a dedicated energy hotline, on 0700 226 6722, to support users seeking to improve energy efficiency using motors and drives.
Plant optimises robotic paint spraying
ABB has invested over GBP250,000 in a purpose-built Surface Coating development plant at its Milton Keynes Business Centre.
Highly reliable motor intended for process use
A new motor designed for high reliability, targeted at the process industry, has been launched by ABB.
As our workload increased, this led to the purchase of a third IRB 510 paint robot to keep pace with demand." The unqualified success of the original unit led to the building of a new paint plant five years ago, for the application of special surface finishes to new products.
Rosti invested in new IRB 5002 paint robots that incorporated ABB's unique Integrated Process System (IPS), enabling rapid selection of different spray gun control parameters.
Rosti's engineers were able to modify the robots in other ways to make them even more efficient.
"We were using a two-part paint mix for certain components," says Scott Simpson.
"When the two elements were put together the paint was only viable for use within two to three hours or it would 'go-off'.
There was, unfortunately, the odd occasion when large quantities of paint were pre-mixed; then unforeseen production hold-ups would mean that it couldn't be used, thereby creating a lot of waste." "To alleviate this problem, we modified the robots by installing two gear-type metering pumps, separate lines for paint and hardener, and a mixing chamber within the body.
The only waste now is residual paint left in the line between the mixing chamber and the spray gun mounting - a matter of a few metres.
Using this method we have made savings of between 10 - 15 per cent in paint usage, in addition to the savings made over traditional hand spraying." Mr Simpson adds, "There is no overspray with the ABB paint robots, as with hand spraying, and on special coatings the IRB 5002 has to hold some very tight tolerances, usually two microns, which it does unfailingly." "The robots are also almost maintenance-free and work virtually non-stop for three or four years before any replacement parts are needed.
They are also extremely robust.
We have had incidents when the fixture conveyor (not part of the robot) has failed to move in co-ordination with the robot, and the two have collided. Request a free brochure from ABB Robotics ...
Although the fixturing was badly damaged every time, the robot required little more than a lick of paint." "With the productivity, quality and paint saving gains we have achieved, coupled to an easy-to-learn programming language, robustness and reliability, I cannot praise ABB paint robots highly enough." 2.
• ABB Robotics: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
