Product category:
Injection moulding
News Release from: Arburg | Subject: Vertical injection moulder
Edited by the Manufacturingtalk Editorial
Team on 06 April 2007
Vertical injection moulder has free
space clamping
A hydraulic, vertical injection moulding machine has a free-space design clamping unit and features generously dimensioned mould mounting platens with a maximum clamping force of 250kN (25 tonf).
From 22 to 25 Mai 2007, Arburg will present two Allrounders at the International Engineering Exhibition 2007 in Nitra, Slovakia The large exhibition stand No
This article was originally published on Manufacturingtalk on 10 Jul 2002 at 8.00am (UK)
Related stories
Injection moulder has clamping force of 4000kN
The largest injection moulder yet built by Arburg - with a clamping force of 4000kN will make its first international appearance at the Fakuma 2002 plastics exhibition, Germany October 15-19, 2002.
Moulder produces syringes at Inter-plas
A 48-cavity mould will be used to produce single-use hypodermic syringes in aninjection moulder using peripheries including handling and an external cooling block.
35 in Hall M4, measuring 110m2, will provide the stage for a representative of the Golden Edition anniversary machine series, the Allrounder 570 C Golden Edition, and for the hydraulic, vertical Allrounder 275 V machine.
With the larger of the two vertical Allrounders, Arburg will evidence its extensive expertise with regard to machines particularly suited to the encapsulation of inserts.
Jaroslav Novak, Arburg subsidiary manager in the Czech Republic and responsible for the exhibition stand in Nitra, underscored the significance of this trade fair in Slovakia, "The International Engineering Exhibition in Nitra has always been an important event.
Further reading
Moulding technology and automation goes on show
Injection moulding machine builder is planning a series of Technology Days during the Fall in theUS to present the latest advances in moulding technology and automation.
Robotic system handles 20kg injection mouldings
The new robotic system variant combines horizontal and vertical systems into a gantry-mounted system for removing 20kg mouldings from the larger injection moulders.
PET, PP preforms production systems are flexible
Small series with quick changes, frequent design changes and independence in preform production are the main arguments for a high degree of flexibility of preform units.
For the Czech Arburg Subsidiary and the Slovakian office, it is without doubt one of the market highlights of the year 2007.".
* Vertical Allrounder 275 V - with the hydraulic, vertical Allrounder 275 V, Arburg has introduced a second vertical machine with a free-space design clamping unit on the market.
The new machine features generously dimensioned mould mounting platens, a maximum clamping force of 250kN (25 tonf), and can be equipped with size 70 and 100 injection units.
The Allrounder 275 V exhibited in Nitra has a clamping force of 250kN, a size 100 clamping unit and is equipped with a demonstration mould which impressively shows the achievable degrees of freedom.
* Compact dimensions - with the low table heights of 800mm on the 175 V and 900mm on the 275 V, these Allrounders are extremely well suited for manual insertion and removal of moulded parts.
Rotary and sliding tables available as optional features for the machines enable the encapsulation process to be automated and consequently reduce removal and insertion times to a minimum.
The Allrounder V machines are designed as free-space systems with integrated C-clamps and therefore feature considerable degrees of freedom around the mould.
In conjunction with their small footprint, the machines are suitable without restrictions for integration into the production process and a variety of automation tasks.
Their use is extremely flexible through the options of either injecting centrally or in the parting line.
The height of the parting line can be varied slightly using a lifting device.
* Golden Edition exhibit - furthermore, an Allrounder 570 C Golden Edition will be presented at the International Engineering Exhibition in Nitra, with a distance between tie bars of 570mm, a clamping force of 2000kN (200 tonf) and a size 800 injection unit.
With the Allrounder 570 C Golden Edition, moulded part weights from 30 to 434g PS can be achieved.
In Nitra, a CD tray will be produced on the anniversary machine.
Material preparation and feed will be performed by a connected Thermolift 100-2 from Arburg.
* About Arburg - Arburg, a German machine construction company, is one of the leading global manufacturers of injection moulding machines for plastics processing with clamping forces between 125kN and 5,000kN (12.5-500 tonf).
Fields of application include the production of plastic parts for motor vehicles, communications and consumer electronics, medical technology, domestic appliances and packaging.
The product range is completed by robotic systems, complex projects and other peripherals.
Arburg's operations are coordinated by an integrated management system and are DIN EN ISO 9001 and 14001 certified.
With locations in more than 20 countries worldwide and more than 30 international trading partners, ARBURG has a worldwide sales and service network.
Some 2,000 employees share in Arburg's success worldwide.
Production is carried out by more than 1,680 employees, exclusively in the parent factory in Lossburg (Germany).
Around 330 further employees work at the 23 subsidiaries and representative offices.
In 2006, Arburg celebrated '50 years of Arburg injection moulding machines'.
• Arburg: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
