Product category:
Environmental contamination, noise, dust and fume extraction, sensors
News Release from: Air Control Industries | Subject: Centrifugal fans
Edited by the Manufacturingtalk Editorial
Team on 16 September 2003
Centrifugal fans offer high flow rates
A range of centrifugal fans, designed with fume extraction in mind, are single inlet types, with forward sloping blades and offer flow rates of up to 3185m3/hr (1875ft3/min).
A range of centrifugal fans, designed with fume extraction in mind, is available from Air Control Industries (ACI) of Chard, Somerset The ACI single inlet, centrifugal fans, with forward sloping blades, offer flow rates of up to 3185m3/hr (1875ft3/min) at pressures ranging to 15mbar (6in
SWG).
Angle of discharge can be set at to 0deg, 90deg, 180deg and 270deg angles.
Mounting options include pre-tapped fixings, free standing, pedestal, spigot and feet, according to model selected.
The fans come with squirrel cage motors fitted, some with options of IP65 ingress protection.
The robust units have fan cases in cast aluminium and impellers either in aluminium or galvanised sheet steel.
Standard ancillaries include inlet and discharge guards, filters and spigots. Request a free brochure from Air Control Industries ...
• Air Control Industries: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
