Latest news on Manufacturingtalk categorised by supplier
Arcraft Plasma Equipments (I) Pvt
Address:
124 Diamond industrial estate
Ketkipada, Dahisar
Mumbai
400068
India
Telephone: (India) +91 22 28965890
http://www.arcraftplasma.com
Our RSS feed for news from Arcraft Plasma Equipments (I) Pvt
Request to receive our free email newsletter each week
Listing of all 7 news releases from Arcraft Plasma Equipments (I) Pvt:
Thick SS plates plasma-arc cut without dross
User application article Gas plasma-arc machine cuts 150mm plate thickness with a capacity of clean cut at 130mm, that means a smooth dross-free cut with bevel of less than 2 deg taper.
News from Arcraft Plasma Equipments (I) Pvt (20 October 2006)
Plasma cutting of 75mm and 88mm thick SS plates
User application article 'Petals' to form welded thick section, large dia stainless steel dished ends were plasma-arc cut, producing edges entirely dross-free, while chilled water extended nozzle life by 600%.
News from Arcraft Plasma Equipments (I) Pvt (24 March 2003)
Plasma arcs provide precise alloyed coatings
Plasma transferred arc welding produces a very high quality, precise wear-resistant alloyed metal deposit on mechanical parts with minimal dilution or deformation of the base material.
News from Arcraft Plasma Equipments (I) Pvt (31 January 2003)
Linear welding system produces thin wall SS tubes
A linear welding system is suitable for welding 0.1mm and above stainless steel sheets into thin wall tubes and pipes of up to 500mm length.
News from Arcraft Plasma Equipments (I) Pvt (22 January 2003)
Keyhole plasma makes single-pass welds in 10mm SS
A plasma welding system has been developed for the single pass keyhole welding of 10mm thick SS plates without producing significant weld defects, according to radiographic tests.
News from Arcraft Plasma Equipments (I) Pvt (20 December 2002)
Linear welding system joins thin SS into tube
A linear welding system has been designed for welding stainless steel sheet, as thin as 0.1mm and thicker, into tubes or pipes of up to 500mm length.
News from Arcraft Plasma Equipments (I) Pvt (19 December 2002)
Inverter power sources work under dusty conditions
A full range of IGBT controlled inverter welding power sources in current ranges from 3 to 160 amps DC, 5 to 200 amps DC, 5 to 300 amps DC and 5 to 400 amps operates under hot, dusty conditions.
News from Arcraft Plasma Equipments (I) Pvt (16 December 2002)
