Product category:
Turning tools
News Release from: Advanced Carbide Tooling | Subject: LWPH range of indexable radial turning inserts
Edited by the Manufacturingtalk Editorial
Team on 27 April 2001
Replaceable inserts turn small parts
Dieterle's LWPH range of indexable radial turning inserts, available in the UK from Advanced Carbide Tooling, provides rapid metal removal economically on small-diameter components.
Dieterle's LWPH range of indexable radial turning inserts, available in the UK from Advanced Carbide Tooling, provides rapid metal removal economically on small-diameter components with the convenience of easy in situ replacement The inserts have been specifically designed for use with tool-holders on CNC sliding head machines
This article was originally published on Manufacturingtalk on 3 Oct 2008 at 8.00am (UK)
Related stories
ACT unveils indexable engraving tools
ACT has developed the Nine9 range of engraving tools with indexable carbide inserts.
They are held by a single counter-sunk locking screw, which makes them accessible to index or change without removing the tool-holder.
The four-sided design of the LWPH range provides four cutting edges on each insert with a positive sharp geometry, which allows a depth of cut up to 4mm and at the same provides good swarf control.
The design also reduces cutting forces, allowing delicate components to be machined consistently.
A choice of three corner radii -- 0.0, 0.2 and 0.4 -- is available in two grades -- an uncoated micrograin grade and a TiCN coated grade on a tough M20 substrate.
Shanks are available from 8mm to 20mm square.
• Advanced Carbide Tooling: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
