Product category:
Factory data acquisition
News Release from: Adept Scientific | Subject: Easy-PC version 9
Edited by the Manufacturingtalk Editorial
Team on 01 December 2005
Circuit board and schematic design
system
Adept Scientific has released the 9th edition of Easy-PC printed circuit board and schematic design system from Number One Systems.
Adept Scientific has released the 9th edition of Easy-PC printed circuit board and schematic design system from Number One Systems Easy-PC 9 for Windows comes complete with schematic capture fully integrated with PCB layout, using a true connective database - not a net-list transfer as with some systems
This article was originally published on Manufacturingtalk on 21 Feb 2000 at 8.00am (UK)
Related stories
At last: Affordable graphical programming
ComputerBoards and Hewlett-Packard launch HP VEE Lab for data acquisition and measurement
Get encoder data into your PC
New cards from ComputerBoards allow encoder signals such as displacement data to be ported into PC applications without the need for add-on hardware - encoder support is built into the boards.
Easy-PC 9 brings you a set of power-packed yet easy to use features normally found only in the world's most expensive schematic capture and PCB layout products, all at the price of a personal user product.
One of the most significant new features of Easy-PC Version 9 is the way it allows PCB visualisation in a stunning 3D view to see just how it will look after manufacture.
The image can by rotated through any axis and viewed from top, bottom, and with exaggerated perspective.
Further reading
New guide to Computerboards range
The world's most comprehensive collection of PCI-bus compatible data acquisition boards, from leading developer ComputerBoards Inc, is listed in a new product guide from Adept Scientific.
Smarter temperature measurement
Highly accurate temperature measurement is made much easier with the release of a powerful new thermocouple input board for PCs.
Instrument data direct into any program
SoftwareWedge provides a simple way of transferring data from any laboratory or industrial instrument with a serial output into the PC program of your choice.
With real component heights being used in the design, the 3D view will allow the user to gauge clearances in the enclosure and to see new height check areas.
Easy-PC Version 9 also allows the user to automatically reverse engineer their PCB Layout back into a Schematic.
After laying out a PCB with components and tracks, at the press of a button the user can automatically produce a Schematic with all the symbols and connections perfectly synchronised with their PCB design.
Using new commands, Easy-PC can automatically place the symbols, or they can be placed by the user, then automatically route in the connections.
A little tidying to match individual preferences, and the Schematic is completed in a fraction of the time it would take by hand.
With Version 9, where a 'fat' track enters a thinner surface mount pad, the necking option will automatically back off the track from the pad to create a thin track segment.
When checked using the DRC (design rule checking) option, no track-to-pad errors will be flagged.
Track Fattening also automatically increases the thickness of tracks that have an alternative track width defined.
Tracks are fattened where this can be achieved without violating the design spacing rules.
Along with a new style user interface in, there are now user definable menus and fully customisable toolbars.
This means the user interface can be tailored to suit every individual's own choice of tools.
New separate sliding preview bars enable fast selecting by simply hovering over the semi-docked bar.
And a new Add Component bar enables component selection by dragging the component into the design.
New document tabs enable a workbook mode to clearly show open designs.
Clicking on these allows easy navigation to other open designs or libraries.
Easy PC Version 9's user interface is fully configurable including menus and toolbars.
Users can add their own toolbars containing your set of tools as required.
All keys on the keyboard can be defined as shortcuts for fast operation.
Other new features include a new configurable Parts list option that enables easy creation of Parts lists using a simple format.
Components in the report can be grouped and sorted on any field including Values; columns can be totalled, and the report can contain multiple component lists each selecting components with different properties.
Within the PCB design Editor in Version 9, using the component pushing mode helps the user move and adjust components to fit them into the tightest of space.
This aids the moving process just when that last component needs to be squeezed in.
And now Interactive Schematic Routing enables the user to guide the routing path for electrical connections within their schematic design.
With point-to-point routing and 'sketch' path mode, schematic connection routing has never been so easy. Request a free brochure from Adept Scientific ...
• Adept Scientific: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
