Product category:
Monitoring and sensor equipment and systems
News Release from: ABB Automation Technologies | Subject: Robot-mounted camera
Edited by the Manufacturingtalk Editorial
Team on 08 June 2005
Robot mounted cameras with six-axis
mobility
A new inspection system utilising a robot-mounted camera, is providing a different approach to the examination, integrity and traceability of mass manufactured assemblies.
A new inspection system utilising a robot-mounted camera, is providing a different approach to the examination, integrity and traceability of mass manufactured assemblies, according to system developers Goldlogic Control Systems (GCS) Eliminating the fallibility of human inspection and the inefficiencies of static inspection systems, the GCS system takes advantage of the six-axis mobility and accuracy of ABB robots to position a camera at various pre-determined positions to examine key features of an assembly, said ABB
This article was originally published on Manufacturingtalk on 23 May 2003 at 8.00am (UK)
Related stories
Stove control system ups blast furnace performance
A new blast furnace stove control system, designed to improve performance and reduce operational costs, by completely eliminating the potential for human errors.
UKAS audit certifies flowmeter calibration rig
A surveillance visit by UKAS of ABB's flow calibration facilities has resulted in a calibration rig certified as being accurate to within an expanded uncertainty of +/-0.027%.
"The manoeuvrability and repeatability of the ABB robot, and the accuracy of its programming system, mean that the camera can be positioned at the optimum angle for illuminating and photographing the target - a vital factor when inspecting welds, for example and an impossible task with a static camera system," said Iain Smith, who co-founded GCS in 1989 to provide PLC and SCADA systems to the industrial sector.
Fully supportable standard OEM equipment is specified for the system including a ceiling, wall or floor mounted ABB IRB 140 or floor mounted IRB 2400 robot, Siemens VS 723 camera, and Siemens S7 programmable logic control (PLC), which communicates with both camera and robot over a Profibus network.
A further feature of the system is a PC-based archiving software program developed by GCS, added ABB.
Further reading
Guidebook examines automation issues
Guidebook looks at the challenges facing today's production companies, how to avoid information overload from your automation system and complying with safety regulations.
Software helps prevent stops and interruptions
Software that can help manufacturers recover up to 40% of the production capacity normally wasted through stops and interruptions collects and analyses production data, to increase efficiency.
Control systems interface is easy to use
The new SCADA Portal from ABB is an easy-to-use graphical interface for controlling remote processes and PLC applications.
According to Smith: "Though we use standard equipment throughout, we are the first company to have brought everything together within one system.
When linked to our own specially developed data acquisition software, the result is an innovative and extremely cost-efficient inspection system." Using the new system, a typical examination of a car seat frame assembly could incorporate, on average, 20 inspections.
Those could include inspection of specific key welds for integrity, dimensional check of washers to ensure the correct piece part is installed, correct installation of rivets and the examination of threads for weld spatter.
Each cycle is not only fast, when compared with visual inspection methods but also very accurate, according to GCS.
GCS's bespoke software communicates with camera, PLC and robot, uploading a 300 KB bitmap image to the PC hard drive at each inspection position.
Every image can be stored, or optionally only 'failed' images uploaded, depending upon requirements.
The uploaded image can be readily identified by a file number linked to the part number or bar coding of the product.
If necessary, the stored data can then be transferred by Ethernet to a central server - though a standard industrial PC with a 160 GB drive would take about 10 years to fill when in virtually constant use, it is claimed.
The company also claimed that any number and virtually any type of visual inspection can be included within the cycle by amending the robot and PLC programs.
In addition, a modified part can be rapidly brought on-line just by 'teaching' the robot and PLC the new coordinates.
Similarly, when new assemblies are introduced, the robot-based inspection system can be quickly and economically re-programmed, unlike static inspection systems, which may well have to be scrapped.
Iain Smith commented: "Although the system was initially developed for the automotive industry it has viable applications within the aerospace, pharmaceutical, white goods and the electronics industries, indeed anywhere that traceability is a requirement." Having conducted its first sale of the system 12 months ago to a Tier 1 automotive supplier, further sales have followed and strong interest is being shown by various industries.
Summing up the part played by ABB robots in the success of the GCS system Iain Smith said: "GCS has a long history with ABB robots stretching back many years and the IRB 140 and IRB 2400 have proved very reliable and accurate platforms on which to base our flexible inspection system.
GCS is also proud to be an ABB partner, providing both PLC programming and vision systems for them within a wide range of automotive industry applications.".
• ABB Automation Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
