Product category:
Inspection and testing (non-metrology)
News Release from: Ambersil | Subject: Aerosol leak detector
Edited by the Manufacturingtalk Editorial
Team on 06 February 2006
Aerosol leak detector has been
reformulated
A re-formulated aerosol leak detector now meets the requirements of DIN Standard 3067 and MIL-L-25567 and is also registered with the German Technical and Scientific Association for Gas and Water.
Ambersil have re-formulated their aerosol Leak Detector so that it now meets the requirements of DIN Standard 3067 and MIL-L-25567 (Oxygen Systems Leak Detection) It is also registered with the DVGW (German Technical and Scientific Association for Gas and Water)
This article was originally published on Manufacturingtalk on 7 Mar 2006 at 8.00am (UK)
Related stories
Copper particles in grease avoids fastener seizure
A high performance grease with concentrated copper particles helps prevent fasteners and bolts from seizing if left for extended periods of time and ensures that disassembly is faster and easier.
This formidable combination of international standards ensures that Ambersil Leak Detector is one of the most advanced available on the market.
The new and improved Leak Detector has also benefited from an increase in can size, from 300ml to 400ml, bringing it in-line with the rest of the MRO range of products.
For the engineer using Ambersil Leak Detector, this means 33% extra product, for the same price- a real cost saving on maintenance budgets! The new formulation is safe for use in a variety of applications, including: * Oxygen.
* LPG and Butane.
* Natural Gas and Propane.
* Compressed Air.
* Refrigerants.
Ambersil Leak Detector is non-corrosive, non-staining, and non-flammable.
It does not contain harmful solvents, silicones, or oils.
• Ambersil: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
