Product category:
Monitoring and sensor equipment and systems
News Release from: Ametek Calibration Instruments | Subject: Pressure calibrators
Edited by the Manufacturingtalk Editorial
Team on 15 February 2006
Pressure calibrators have increased
flexibility
Latest pressure calibrators have increased flexibility and it is now possible to connect different pressure modules in other ranges than the indicator, and achieve accuracies down to 0.01% FS.
Calibration is essential to all industrial procedures, from energy and pharmaceutical sectors to food, marine, and plastics industries The new Jofra APC series from Ametek makes it possible to obtain precise pressure calibration results
This article was originally published on Manufacturingtalk on 7 Dec 2007 at 8.00am (UK)
Related stories
Software used to calibrate pressure sensors
Latest documenting calibration software for automatic calibration of sensors using a PC is capable of performing pressure calibration as well as temperature calibration.
Temperature measurement guides are on-line
A single page temperature sensor guide published on-line is designed to direct a user towards the right choice of a temperature sensor and is supported by a 'white paper'.
The series is an update of the previous PPC series that has been a great success during the last ten years.
In the new series of pressure calibrators we have chosen to maintain the existing characteristics and possibilities, but based on market requirements we have added a large number of new potentialities all based on an increased flexibility and easy operation.
One of the main new characteristics of the APC series is the increased flexibility.
The core product is still a very accurate pressure indicator and a pump generating pressure.
In addition to this it is now possible to connect different pressure modules in other ranges than the indicator, and these APM pressure modules are capable of achieving accuracies down to 0.01% FS.
The APC indicators, pumps and APM modules may be connected in every way depending on the pressure ranges and accuracy requirements of each customer.
This provides a complete and well-considered solution, which is always ready for use on delivery, going from vacuum up to 700 bar.
The APC indicators are all equipped with an RS232 input as standard, which makes it possible to communicate with the indicators via PC.
Furthermore it can supply a transmitter with power and show the mA reading in the display at the same time.
• Ametek Calibration Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
