Product category:
Monitoring and sensor equipment and systems
News Release from: Ametek Calibration Instruments | Subject: JOFRACAL documenting calibration software
Edited by the Manufacturingtalk Editorial
Team on 07 December 2007
Software used to calibrate pressure
sensors
Latest documenting calibration software for automatic calibration of sensors using a PC is capable of performing pressure calibration as well as temperature calibration.
Ametek Calibration Instruments has announced Version 4.0 of its popular JOFRACAL documenting calibration software for automatic calibration of sensors using a PC Version 4.0 can perform pressure calibration as well as temperature calibration
This article was originally published on Manufacturingtalk on 24 Oct 2005 at 8.00am (UK)
Related stories
Calibration and repair capability set up in UK
AMETEK Calibration Instruments has opened a direct sales outlet in the UK and has appointed Ian McPhie as UK sales manager.
Multi-scanner calibrates sensor groups
Advanced Signal Multi-scanner at MTEC 2006 provides an automatic solution for the calibration of up to eight temperature sensors, or three stacked manage up to 24 sensors.
JOFRACAL software controls the complete calibration procedure, stores the results and provides a calibration audit trail through hard-copy certificates.
All calibration data are stored for each sensor to monitor drift and optimise recalibration intervals.
A scheduler feature allows planning of future calibrations.
JOFRACAL can now be used with JOFRA DPC-500, APC, CPC and IPI pressure calibrators, all JOFRA temperature calibrators, as well as JOFRA AMC900, ASC300 multi signal calibrators and the ASM-800 signal multi scanner.
When used with JOFRA ASM-800 signal multi scanner, JOFRACAL can perform a simultaneous automatic calibration on up to 24 pressure or temperature devices at the same time.
* JOFRA APC, CPC, IPI, ASC300, AMC900, and ASM-801/803 units can all be used for online calibration.
* JOFRA APC, CPC and IPI can be used as a pressure reference.
* JOFRA ASC300 and AMC900 can be used as a pressure reference when an APM pressure module is connected.
The JOFRA APC and CPC are excellent for calibrating pressure switches, said Ametek.
The JOFRA DPC-500 documenting pressure calibrator can be used for offline calibration.
Work orders created in JOFRACAL can be downloaded to the DPC-500.
Results produced on the DPC-500, either from JOFRACAL work orders or from the DPC-500 itself, can be imported back into JOFRACAL and produced as a certificate.
Calibration procedures and results are stored in a user-friendly database which features search and sort facilities.
Current DPC-500 users will automatically be supplied with the new software, said Ametek.
• Ametek Calibration Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
