Product category:
Presswork, stamping, fabrication Subcontracting Services
News Release from: The Angle Ring | Subject: Specialist formed and welded pipes
Edited by the Manufacturingtalk Editorial
Team on 25 December 2002
Angle Ring takes up pipework fabrication
The production facilities for the manufacture of specialist formed and welded pipes previously supplied by Bentham International have been taken over by The Angle Ring Co.
The production facilities for the manufacture of specialist formed and welded pipes previously supplied by Bentham International have been taken over by The Angle Ring Co With some transfer of personnel, product quality and uniformity remains the responsibility of Mr Barry Stone, former Bentham production and development director, who brought many years of experience and expertise to his new position
This article was originally published on Manufacturingtalk on 15 Oct 2003 at 8.00am (UK)
Related stories
Large press bent tube into shape for walking
What is believed to be the world's largest open-framed hydraulic press undertook the bend forming of tubular steelwork used in the construction of the James Joyce bridge in Dublin.
Custom panels and metalwork service offered
Surtech Distribution offers a full 'one-stop-shop' design and manufacturing service for electrical enclosures, panel work and general metalwork and finishing.
CD electronically outlines engineering services
CD covers a range of services available to the mechanical, electrical and electronic industries, through design, manufacture, maintenance, installation and commissioning.
Pipework in standard and specialist materials, formed in plate thicknesses from 3 to 200mm and lengths up to 10 metres can now be supplied.
Standard or special pipe diameters are produced to current ASTM, ASME and BS specifications, suitable for use in the oil, gas and petrochemical industries and other engineering operations where hollow tubular sections are used.
All welding is carried out to ASME IX Boiler and Pressure Vessel Codes and BSEN 287/288 approved procedures, or to clients' own welding specifications.
Work can be carried-out to comply with even tight delivery schedules, which overcomes the problem of any extended delivery which may be quoted by mainland European suppliers.
Equipment taken over from the former Bentham International company includes three press brakes up to 12MN capacity with 10 metre bed: an edge planer for plates also up to 10 metres long: together with 10 metre SAF welding beams, equipped with plasma, TIG and submerged arc welding for the longitudinal seam closure of pipes.
The materials used for pipe manufacture include Austenitic stainless steels, together with Duplex, Super-Duplex and Nickel alloys.
Carbon steels including low alloy and high strength carbon variations can also be accommodated, together with other ferrous and non-ferrous materials including aluminium, copper, brass, titanium and bronze.
All products are produced to close tolerances, with full QA support and documentation, with welding carried out to Lloyds approved welding procedures.
Ultrasonic wall thickness measurement, radiography of longitudinal and circumferential welds, surface crack detection and heat treatment services can be provided.
Cold rolling and induction bending of pipework can also be undertaken, including small or long radius and even including non-circular bends, with high accuracy and limited deformation in pipes up to 30 metres in length.
• The Angle Ring: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
