Product category:
Machine spindles and spindle attachments
News Release from: AutoDrill | Subject: Multiple spindle heads
Edited by the Manufacturingtalk Editorial
Team on 21 May 2007
Attachment enables multi-hole drilling
Affordable multiple spindle head attachments for use with a single-spindle drilling machine, (or drill-press), or milling machine enable the drilling of multi-hole patterns in workpieces.
AutoDrill makes available a method to drill multiple hole patterns on a standard single spindle drill press or milling machine Their affordable multiple spindle heads can increase production and are available for virtually all drilling equipment
This article was originally published on Manufacturingtalk on 2 Oct 2002 at 8.00am (UK)
Related stories
Low cost method drill multiple hole patterns fast
An affordable, made to order, fixed pattern multiple spindle heads can increase drilling efficiency many times.
Drill complex patterns in one-step, virtually eliminate setup and operation errors, extend tool life and stop for changes less often.
Standard are ER collets and one-shot grease lubrication is designed into every head for low maintenance and trouble free operation.
These gear-driven heads are constructed with efficient helical gearing for high-speed operation and lower noise levels.
Ball and needle bearing construction is used insuring long-term quality assurance under heavy loads.
Adapters can be provided for any conventional drilling machine, motor mounts, automatic drilling and tapping equipment and even CATxx taper machines.
Multiple hole drilling capacities can exceed 0.750in (19mm) diameter with standard tooling.
Multiple spindle tapping applications are also addressed on a regular basis.
• AutoDrill: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
