Product category:
Miscellaneous equipment, batteries, battery charging systems, etc
News Release from: Exide Technologies | Subject: Charger
Edited by the Manufacturingtalk Editorial
Team on 26 June 2007
HF power offered for self-guided vehicle
fleet
High frequency chargers have been installed for a fleet of 25 self-guided vehicles used by a major food manufacturer to improve performance and reliability.
A major food manufacturer has invested in a fleet of 25 self-guided vehicles (SGVs) for one of its production facilities in the UK The SGV System was provided by FMC Technologies and replaces a 16 year old, obsolete wire guided AGV System
This article was originally published on Manufacturingtalk on 12 Oct 2004 at 8.00am (UK)
Related stories
Reaching new heights in the charger room
Chloride Motive Power has launched an exciting new breakthrough in charger room systems.
Battery charger is smaller and lighter
Single phase high frequency battery charger suits classic 'flooded', low maintenance and gel maintenance free batteries, is a fraction of the size of an equivalent conventional charger.
The fleet will handle Palletised Finished Case Goods for despatch to the UK and Europe.
The SGVs are capable of transferring over 100 pallets per hour from the ends of production line palletisers to either shipping conveyors or ASRS storage conveyors.
The vehicles offer a number of benefits over the out-going fleet but increased capacity has been made possible because of the bank of High Frequency (HF) chargers from Chloride Motive Power (CMP).
Further reading
Simplifying battery charger selection
Battery charger selection will be less complex and changes to the designs will further improve reliability and reduce life costs says a suplier expanding its range to over 300 models.
Health and safety station guards battery charging
Factories that maintain battery charger rooms for electric vehciles can benefit from a 'Health and Safety Station', which contains protection and emergency items to protect workers.
High frequency charger has user-friendly interface
A high frequency 2100 HP charger has been updated with a high visibility, tri-coloured, charge status indicator, and a user-friendly interface.
Each vehicle is powered by a CMP 'Classic' lead acid battery.
The food manufacturer's Electrical Control Systems Engineer commented: "We specified CMP batteries and chargers for a number of reasons: the High Frequency chargers were already in use at another of our production facilities and we had been impressed by the performance and reliability".
The SGV System and battery charging system work seamlessly together to ensure vehicles remain charged.
When a self-guided vehicle approaches a pre-programmed state of battery discharge, it automatically manoeuvres to one of eight charging points.
No human intervention is necessary as the SGV automatically positions itself on a charging plate on the floor, which is connected to a 48V, single-phase wall-mounted charger.
The previous AGVs relied on a 24V on-board charger, which would be connected to an overhead power supply and required an 8h charge.
Because of the 24/7 shift pattern operated at the factory, six AGVs would be recharging at any one time.
The new SGVs can be recharged within 5h and are also able to 'opportunity charge'.
* Opportunity charging - opportunity charging allows the vehicles to automatically dock at a charging station when they are not in use, and receive a fast charge, which enables them to remain in operation around the clock.
This means that there are usually only one or two SGVs on charge at any one time, freeing up more vehicles for material transport and allowing for maximised production.
Not only will battery life be extended for the new SGVs, but because they are laser guided, production is far more flexible.
A rotating laser scanner placed on top of the vehicle detects reflective targets mounted on plant walls, to navigate its way through the facility.
Vehicle guide paths can be changed, pick up and drop off points added, and system expanded quickly and easily.
This also means that should the layout of the factory be re-organised, the system can easily be reconfigured.
Summing up, the Electrical Control Systems engineer said, "We employ world-class production and maintenance practices and the AGV system offered real benefits.
The new SGV fleet will build on these operational advantages.
We managed to achieve a 5 or 6 year service life from our traction batteries and we are hoping to improve on this even further with the help of FMC Technologies and CMP; both companies have taken a 'team' attitude to this project - offering practical advice to our engineers and collaborating with each other.".
• Exide Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
