Product category:
Coatings and coating systems
News Release from: Applied Coating Technologies | Subject: Cosmetic finishes for plastics
Edited by the Manufacturingtalk Editorial
Team on 23 July 2002
Water back-spray ups plastics finishes
quality
A new range of high quality cosmetic finishes for plastics mouldings is available following the installation of a fully enclosed water-back spraying facility.
Applied Coating Technologies will be showing a new range of cosmetic finishes for plastics at Interplas 2002 The company has recently installed a fully enclosed water-back spraying facility for the application of cosmetic finishes
This article was originally published on Manufacturingtalk on 2 May 2001 at 8.00am (UK)
Related stories
Coating reduces shielding costs for enclosures
APPLICOAT EC225 provides an order of magnitude better electrical shielding than nickel paints. The thickness is under half that of nickel, so the applied coating cost is significantly reduced.
EMI/RFI shielding through variety of techniques
ACT has unique expertise in Paint Spraying, Electroplating, Vacuum Deposition and Printing, particularly with respect to providing EMI/RFI shielding
This plant has been specifically designed to provide a high-quality surface finish to plastic mouldings, increasing the perceived value of any product.
Excellent adhesion, abrasion resistance and durability is achieved onto ABS, Noryl, Polycarbonate and other similar thermoplastics.
Although a wide range of gloss levels are available, satin / matt finishes are usually specified as these produce very low scrap levels and are currently in vogue.
Contemporary paint finishes include stainless steel / satin chrome effects.
Where greater chemical resistance and exterior durability are required, two-pack polyurethane top-coats are recommended.
These have been developed in smooth, spatter and textured (including soft-feel and suedette) finishes.
With adhesion promoters available for even the most difficult substrates (polypropylene, nylon), paint finishes can be applied selectively onto most plastic or metal surfaces.
Specialist knowledge in the design of high precision masking jigs is regarded as an essential area of expertise.
Selective coatings have a number of benefits; they can reduce cost, increase the affect of a particular finish and protect critical mechanical tolerances.
The development of decorative finishing at ACT was in response to customer requirements for a one-stop shop finishing service.
The core business of ACT is EMI shielding coatings and examples of components coated with conductive paints and electroplating techniques will also be on show.
INTERPLAS 2002: Stand No: J41.
• Applied Coating Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
