Product category:
Press shop and sheet metal working automation, slitting, shearing
News Release from: AP and T AB, Automation, Press and Tooling | Subject: Power press line
Edited by the Manufacturingtalk Editorial
Team on 06 September 2005
Presses operate as two separate units or
link line
The press line for a heating systems manufacturer is laid out for maximum flexibility and can be operated as two separate press cells, or as a linked press line for multiple press operations.
When the German heating systems manufacturer Vaillant decided to build an in-house press line for water heater parts, they invited nine potential suppliers to create the best complete production solution After an open bidding process, including a 'suppliers day', in which all the bidding parties participated, Vaillant ultimately chose AP and T of Sweden for the project
This article was originally published on Manufacturingtalk on 5 Sep 2005 at 8.00am (UK)
Related stories
Power press lines increase wheel output
Two new press lines have cut wheel manufacturing raw material costs and reduced in-process inventory as well as improving plant safety and accelerating production rates.
Power press lines offer 10% shorter cycle times
Three complete power press production lines provide higher availability, shorter cycle times and ease of service to produce thermal and acoustical protective heat shields for automotive engines.
The combination of total responsibility and high-tech solutions was the deciding factor.
Within six months of their decision, Vaillant's new press line was installed and production had begun.
Vaillant learned about AP and T through one of their own customers.
Further reading
Press delivered for thixoforming research
For further research into thixoforming of metals - of growing automotive industry interest - a specialised power press has been delivered to the University of Liege.
Toolmaker to benefit from versatile tryout presses
All five ram cylinders and four cushion cylinders can be independently set and controlled in four hydraulic tool-try-out presses delivered by AP and T in Sweden to Horst Matzner in Germany.
New press line success in Denmark
When Scan Press A/S in Horsens, Denmark needed a new production line with a high degree of automation and a number of entirely new technical solutions, AP and T became the supplier of choice.
"We were having our products pressed at a Dutch firm that is automated with AP and T equipment".
"AP and T showed us the possibilities afforded by pressing and automation with the help of 'One Responsible Partner'," reports Vaillant production manager Marc Doerpinghaus.
* Open procurement process - when Vaillant decided to begin manufacturing water heater frames and front panels in-house, the company approached suppliers throughout Europe to find the best production solution.
Such an approach is unusual in Germany, where companies often choose domestic suppliers.
"As a market-leading European company, we operate throughout all of Europe," explains Doerpinghaus.
He noted that AP and T stood apart from the beginning of the process by providing a thorough and well-prepared presentation of a sound, high-tech concept.
This laid the foundation for a relationship based on trust.
This relationship was strengthened when all the bidding companies were invited to participate in an open forum during Vaillant's 'suppliers day'.
"That is where AP and T distinguished themselves with numerous interesting ideas and questions".
"We were also impressed by the production simulation, which they were the sole supplier to present." Vaillant then visited two of AP and T's existing customers in Sweden to see the company's systems in practice".
""AP and T's automation was technically brilliant".
"The presses and automation we saw at Asko Cylinda and at AP and T's plant made up our minds".
"We had found the right partner," affirms Doerpinghaus.
* Built for the future - two general-purpose presses from AP and T's ZM series are at the heart of Vaillant's production line.
They deliver 4000 and 6300kN (450 and 710 US tonf) of press force, respectively.
The parts being produced are formed in multiple steps.
Consequently, each bolster is equipped with three CD feeders.
AP and T's efficient CD feeders are specially adapted for moving parts through multiple tool sets in a multiple step forming operation.
Having three separate synchronized CD feeders for each bolster makes the press line more flexible and increases productivity.
The presses are also equipped with two AP and T BF blank feeders.
Vaillant opted for two feeders even though their current production process is only using one.
They view it as a source of adaptability and flexibility for future needs.
A conveyor belt transports the finished parts out of the line for inspection and painting.
* Flexible and fully automated - the press line is laid out for maximum flexibility enabling it to handle a number of different products.
In practice, the equipment can be operated as two separate press cells producing different products, or as a linked press line for products that require multiple press operations.
AP and T also delivered a fully automated tool-changing system for the line.
This system has automatic tool clamping which minimises set-up time during tool changes, increasing availability.
The fully automated production process is controlled by AP and T's proprietary MC32 control system.
This enables transparent overall control of every piece of production equipment in the line.
* Praise for AP and T project management - in addition to the benefits realized from their technical solution, Vaillant appreciated the benefits of AP and T's project management in which a single dedicated project manager is responsible for the entire project".
""One very important aspect is that of having a single counterpart with whom to communicate throughout the entire project".
"AP and T has functioned as 'One Responsible Partner', and the project management has been highly professional and friction-free," says Doerpinghaus.
AP and T's efficient project management makes it easy to move through all phases of a project right up to the first production run.
In this case, the installation and start-up was completed in only five weeks and Vaillant was able to begin production less than six months from their order date.
* Assurance for the future - now that Vaillant's production on the new line is in 'full gear', they can realise the benefits of AP and T's modular design with a 90% availability assurance.
In the event of a technical problem, AP and T service personnel will be on-site within 16 to 24h.
Doerpinghaus is more than pleased with both the project and its outcome, and is excited about the future".
""We are looking forward to continued excellent service and quick response times, so that the system delivers maximum availability.".
• AP and T AB, Automation, Press and Tooling: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
