Product category:
Laser marking systems
News Release from: ACI Laser GmbH | Subject: DPLFortis Marker laser marker
Edited by the Manufacturingtalk Editorial
Team on 28 September 2007
Laser marker engraves hard materials at
speed
Offering 18W power and high speed a laser marker is suits 'time-critical' production processes for engraving or deep engraving of hard material.
ACI Laser's DPLFortis Marker laser marker, when operating in TEM00-mode, generates 18W cw of laser power The laser is particularly suitable for time-critical production processes due to its 18W power and the resulting speed
This article was originally published on Manufacturingtalk on 28 May 2007 at 8.00am (UK)
Related stories
3D models of off-the-shelf telescopic slides
Telescopic ball bearing slide designer and manufacturer, Accuride International, has produced optimised 3D models of its 'off-the-shelf' products which can be downloaded via its website.
Full digital set-up on tension control system
A new digital tension controller is claimed to be one of the most comprehensive tension control systems currently available
This power and speed are of advantage for engraving or deep engraving of hard material, said ACI to Manufacturingtalk.
The characteristics of the DPLFortis Marker are suitable for many industrial requirements, from compact manual workstations to the integration into complex production lines.
Each standard PC with a current operating system of Windows can control the Laser.
The use of the newly implemented USB 2.0-interface makes this possible.
The PC will automatically recognise the connected hardware component, the laser system, when the USB-cable is connected.
* Attachments - optional standard attachments, such as laser protective housing, X-Y-Z- and rotating axles, a rotating table, as well as the foil marking unit FoilStar 300 provide operational solutions according to laser protective class 1 or integrators make the application within production lines easier.
The MagicMark V3 software package has many new functions and is included with DPLFortis Marker.
ACI's philosophy is to always control the laser markers via commercial PC interfaces.
No additional plug-in boards are required.
The marking software MagicMark V3 specially features a perfect combination of an easy to operate graphical software, as well as an integrated script language for controlling the laser markers.
• ACI Laser GmbH: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
