Product category:
Manufacturing IT hardware
News Release from: Advantech (UK) | Subject: PCA-6188 single board computer
Edited by the Manufacturingtalk Editorial
Team on 23 September 2004
PCA-6188 single board computer announced
Advantech today launched PCA-6188 single board computer, the next-generation Socket 478 Intel Pentium 4 processor based full-sized single board computer with 800/533/400MHz Front Side Bus.
Advantech today launched PCA-6188 single board computer, the next-generation Socket 478 Intel Pentium 4 processor based full-sized single board computer with 800/533/400MHz Front Side Bus PCA-6188 is designed with the Intel 875P chipset and 6300ESB (I/O controller) to support the most advanced Intel Pentium 4 processors
This article was originally published on Manufacturingtalk on 25 Jan 2002 at 8.00am (UK)
Related stories
Touch panel industrial computer is ultra-slim
Ultra-slim touch panel computer gives a powerful and durable solution for process and machine control applications.
Card effects PCI Bus high speed analogue output
For industrial PCI Bus applications where high-speed, continuous analogue output or real-time waveform functions are required, an advanced analogue output card is effective.
High speed/high capacity dual channel DDR400 memory, and high performance I/O functions such as dual Gigabit Ethernet ports, AGP 8x graphic controller, serial/parallel ATA ports, and a PCI-X (64-bit/66Mhz) bus provide advanced throughput.
Compliant with PICMG 1.0 specification, PCA-6188 can be used with a wide choice of existing PCI/ISA backplanes and is versatile enough to meet the requirements of any industrial application.
PCA-6188 is designed to deliver high performance computing for a range of industrial applications.
Further reading
Distribute shop floor data via the Internet
An embedded, Windows CE-based platform automatically captures and analyses real-time shop floor data for distribution via the Internet.
Ethernet family accesses remote serial devices
Ethernet data gateway products provide a simple way to connect serial devices such as PLCs and bar code readers to the Ethernet and Internet.
It uses Intel's long-life 875P and 6300ESB chipset, capable of running the fastest Pentium 4 and Celeron processors.
It has 4 DIMM sockets in two separated memory channels and can support ECC (Error Checking and Correction) for best reliability.
It accepts up to 4GB DDR 400/333/266 SDRAM memory; enough for most of applications, and the CSA (Communications Streaming Architecture) port of the 875P chipset provides dedicated 266MB/s bandwidth for the 82547 Gigabit Ethernet controller.
The second Gigabit Ethernet port uses Intel's 82541 controller connected to the 32-bit PCI bus of the 6300ESB I/O controller.
The on-board AGP 8X ATI Mobility Radeon 9600 Pro graphic accelerator provides dual VGA display and supports LVDS and DVI interface.
Two serial ATA ports (up to 150MB/s) allow the use of thin and long SATA cables for storage devices, eliminating cabling issues inside the industrial grade chassis.
In addition, PCA-6188 also provides most of the popular I/O interfaces, such as four USB 2.0 ports, AC-97 audio interface, 2 RS-232 ports, one enhanced parallel port, and a floppy disk interface.
PCA-6188 is designed with consideration for reliability to be suitable for industrial environments within a wide range of operating temperatures, up to 60 degree Celsius.
The CMOS data backup and restore function protects the BIOS setup data from loss due to battery failure.
A 256-level watchdog timer prevents the system from hanging up if a program cannot be executed normally.
A remote management port allows users to monitor the system health status and control the system remotely through standard SNMP/HTTP protocols when used with Advantech's SNMP-1000 Intelligent System Manager. Request a free brochure from Advantech (UK) ...
• Advantech (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page

