Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Baldor UK | Subject: Ethernet motion automation range
Edited by the Manufacturingtalk Editorial
Team on 23 February 2007
Ethernet motion automation range
Baldor exhibited its Ethernet-compatible 3-phase AC drive range, compatible with both TCP/IP and the deterministic Ethernet standard, in the UK at the MTEC show.
Baldor showed its Ethernet-compatible 3-phase AC drive range in the UK at MTEC Compatible with both TCP/IP and the deterministic Ethernet standard, Ethernet Powerlink, the MotiFlex AC drives join single-phase drives, a machine controller and a development environment
This article was originally published on Manufacturingtalk on 15 Jun 2001 at 8.00am (UK)
Related stories
How to save electric motor energy
Baldor has published a free 16-page guide packed with useful energy saving information for electric motors users.
Low inertia motors drive motion control
Baldor has launched a new range of brushless servo motors for precision motion control applications, based on rare-earth neodymium iron boron magnets.
Together, the Ethernet-compatible range provides machine builders with a single source of supply for all the key motion system elements.
"The release of the MotiFlex 3-phase AC drive range gives us a complete real-time Ethernet motion control solution - allowing machine builders to take advantage of Ethernet immediately," says David Greensmith.
"The technical benefits of a high speed machine network have been well publicised, but it's the simple factors of system cost savings and product availability that are being overlooked." Greensmith continued: "Machine builders are definitely sold on the system building benefits of the architecture.
Further reading
Motors meet 'Efficiency 1' standard
Baldor has launched a complete range of IEC frame motors meeting the new 'Efficiency 1' standard, backed by a stocking service from the company's new European support hub in Bristol.
Motion control programming is multi-tasking
Baldor has launched a new version of its Mint system development environment to support the evolving needs of machinery and automation OEMs.
Motors ideal for machine tools and automation
Baldor has launched a range of AC vector-duty motors constructed using steel band techniques, for automation applications requiring very precise control of speed and torque.
For each drive node, I calculate that a single Ethernet CAT5e cable eliminates somewhere in the region of 40 to 50 cable stripping, soldering and assembly tasks, for example.
Ethernet now accounts for the majority of our sales enquiries, and this product release opens the technology to almost all users." From its first 18 months' experience with Ethernet motion, Baldor has proved the technology to be very attractive in small to medium multi-axis systems arena.
The savings come mainly in the area of simpler engineering, and reduced control hardware, cabling and assembly.
Even though the actual cost of the Ethernet elements is a few percent higher than traditional motion equipment, the overall savings can be significant.
The addition of 3 phase AC drives means that users can build all-Ethernet systems with the optimum choice of motor technology for each axis, from small to large loads.
Rotary and linear versions of brushless servo, and AC vector motors are all software selectable, and these will be joined shortly by support for DC servos.
Many machine builders are trying to move to all-electronic architectures, to provide software-centric, highly-reconfigurable equipment.
Baldor's Ethernet technology is particularly beneficial for this, as its single machine controller can manage different system components such as I/O, absolute encoders, Ethernet PowerLink DS402 positioning drives, steppers and up to 16 interpolated axes.
This means that machine builders can replace pneumatic actuators with stepper or servo motors for example - with no increase in controller hardware - eliminating the costs and issues associated with maintaining a secondary supply of clean compressed air.
Applications can be implemented with the Ethernet Powerlink protocol.
This provides a deterministic real-time performance that makes it suitable for handling the most demanding motion, as well as a means to link seamlessly with standard Ethernet networks.
An alternative is the use of standard TCP/IP protocols, which can be suitable if the automation in question does not have any demanding time synchronization or multi-axis coordination considerations.
Free ActiveX tools provided as part of Baldor's development environment make it very easy for developers to create Windows based PC applications that can communicate with the real-time motion hardware via Ethernet, such as a man-machine interface, or remote monitoring software. Request a free brochure from Baldor UK ...
• Baldor UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
