Product category:
Electrical and Electronic Testing
News Release from: Banner Engineering | Subject: U-gage chemically resistant models
Edited by the Manufacturingtalk Editorial
Team on 15 September 2005
Chemically resistant ultrasonic sensors
Banner Engineering has added chemically resistant models to its U-gage line of ultrasonic sensors.
Banner Engineering has added chemically resistant models to its U-gage line of ultrasonic sensors The chemical protection comes from a factory-installed Teflon flange and film coating bonded over the sensors transducer, sealing against gases and vapors that would destroy standard models
This article was originally published on Manufacturingtalk on 29 May 2003 at 8.00am (UK)
Related stories
Compact ultrasonic sensors push-button programmed
Compact ultrasonic sensors feature an advanced microprocessor design, push-button programming and bright diagnostic status LEDs located directly on the sensor housing.
Lasers offered at under $155 for precise sensing
Retroreflective laser sensors, at less than $155.00, feature an extremely small, tightly collimated 4mm laser sensing beam for precise sensing at ranges up to 18m.
Chemically resistant U-gage ultrasonic sensors are available in all QT50U and most T30U models and are ideal for a wide variety of level control applications in cleaning, etching and other chemical processes where material is corrosive or caustic.
QT50U models have a sensing range of 200 mm to 8 m, and T30U models have a sensing range of 300 mm to 1.5 m.
With the exception of range, performance specifications for both sensors are identical to those of the corresponding standard models and include the following: A variety of outputs and voltages QT50U models available with 10 to 30V dc and analog or discrete outputs, and universal voltage 85 to 264V ac/24 to 250V dc with a SPDT electromechanical relay output T30U models with 10 to 30V dc with discrete or analog/discrete outputs Fast, easy-to-use Teach programming that uses two on-board push buttons Fully encapsulated designs rated IP67, NEMA 6P for use in harsh environments Inherent immunity to target color differences and high-power light interference Bright LEDs that display status during setup and operation Models with high/low limit controls Unique housings for multiple mounting configurations using the sensor's threaded nose or a variety of brackets Direct link to product information.
• Banner Engineering: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
