Product category:
Airline equipment, filters, drains and traps, control systems, etc.
News Release from: Beko Technologies | Subject: High pressure refrigeration dryer
Edited by the Manufacturingtalk Editorial
Team on 05 July 2006
Refrigeration dryer used at high
pressures
A refrigeration dryer for applications up to 50 bar uses a SS heat exchanger with extremely smooth surfaces for high-energy efficiency, self-cleaning and maximum reliability.
Beko Technologies have extended the Drypoint refrigeration dryer range with a high-pressure version: Drypoint RS HP, specially designed for applications up to 50 bar The new Drypoint RS HP scores with its high operational reliability, efficiency and cost effectiveness - as expected from Beko
This article was originally published on Manufacturingtalk on 4 May 2001 at 8.00am (UK)
Related stories
Plastics mould cooling times reduced
Beko Technologies's Bekoblizz system uses precisely controlled dry compressed air to reduce plastics mould cooling times, increasing the production rate by up to 30%.
Cooling for blow moulding to be demonstrated
On September 19 and 20, Beko Technologies Ltd will be hosting a Bekoblizz Workshop for the plastics industry at Polymer Training in Telford, Shropshire.
The most important feature is the plate heat exchanger made of stainless steel.
The surfaces are extremely smooth.
This promotes high-energy efficiency, has a self-cleaning effect and ensures maximum reliability in operation.
With high compression levels, the contaminates become more concentrated and also more aggressive.
Under such conditiones, conventional plate heat exchangers are particularly susceptible to corrosion, and rust particles entrained by the dry compressed air can damage downstream user points or clog up filters and pipes.
With stainless steel plate heat exchangers corrosion simply will not occur.
All Drypoint RS HP units are equipped with a Bekomat 12 PN 63 condensate drain, this is the high pressure version of the Bekomat - the number 1 condensate drain worldwide.
This device contributes significantly to the cost effectiveness and efficiency of the system.
In contrast to timed solenoid valves installed on conventional high-pressure refrigeration dryers, the Bekomat device will only discharge the actual condensate quantity collected.
Therefore it avoids unnecessary loss of compressed air, thus saving energy.
The Drypoint RS HP programme comprises of refrigeration dryers from 25 - 3030m3/h. Request a free brochure from Beko Technologies ...
• Beko Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
