Product category:
Airline equipment, filters, drains and traps, control systems, etc.
News Release from: Beko Technologies | Subject: Oil Control, MedBAC and Drypoint dryers
Edited by the Manufacturingtalk Editorial
Team on 22 February 2008
Compressed air oil content continuously
checked
The Oil Control system continuously monitors the oil content of a compressed air flow down to 0.001mg/m3h - either centrally or at individual points
Beko Technologies will be showing its Oil Control, Medbac and Drypoint dryers at the UK's Air-Tech 2008 exhibition Oil Control enables permanent monitoring of the oil content of a compressed air flow down to 0.001mg/m3h - either centrally or at individual points
This article was originally published on Manufacturingtalk on 4 May 2001 at 8.00am (UK)
Related stories
Plastics mould cooling times reduced
Beko Technologies's Bekoblizz system uses precisely controlled dry compressed air to reduce plastics mould cooling times, increasing the production rate by up to 30%.
Cooling for blow moulding to be demonstrated
On September 19 and 20, Beko Technologies Ltd will be hosting a Bekoblizz Workshop for the plastics industry at Polymer Training in Telford, Shropshire.
For the first time, said Beko, it is now possible to monitor the quality of compressed air by continuous online measurement in compliance with the latest Pharma and food industry standards.
MedBAC is used for medical breathing air control.
Compressed air used for medical treatments has to meet very special requirements in terms of quality, availability and patient safety.
Further reading
Plastic components cycle time cut by up to 30%
Using cold dry compressed air to enhance the cooling process, the deep cooling effect of the Bekoblizz system reduces the cycle times in the production of plastic components by up to 30%
Pneumatic company lists expertise through CD-ROMs
Beko Technologies has embraced the benefits offered by screen media technology to produce CD-Roms on its Drypoint and Bekosplit products.
With MedbBAC, permanent monitoring of all common medical gases is possible online, and with an alarm function when pre-set levels are exceeded.
* Compressed-air adsorption dryers - the heat regenerating Beko Everdry compressed-air adsorption dryers are designed for large volume flows of up to 20,000m3/h and more.
Beko told manufacturingtalk.com that Everdry means customer-orientated, custom-designed drying solutions using standardised, high performance technology.
Consultation, engineering, installation and service for Everdry drying systems are all available from Beko's UK support office.
* Special applications - The Everdry product series begins with the Everdry FRA, which as a 'zero-purge' dryer at a very high technical level, it provides the economic base for standard an specialised applications.
The Beko Everdry FRA is complemented by the price-optimised Everdry FRC version, which has also been designed as a 'zero-purge' dryer, but which involves lower investment costs as a result of reduced technical complexity and fewer features.
Another variant most reasonable in price, the Everdry FRP, requires approx, two percent of the processed compressed air as purge air but offers lower investment costs for those customers on a tight capital budget.
The range of products offers suitable solutions even for the application at high inlet temperatures and in warm and humid climate zones.
The Everdry FRL as a 'closed-loop' dryer with its cooling in a closed cycle is suitable even for the application under tropical climatic conditions.
Furthermore, Beko offers complete integrated energy efficient system solutions, by making use of the heat of compression.
These systems are designed for pressure dew points down to -40 deg C and for volume flows up to a considerable 60,000m3/h.
Beko have recently delivered one of the largest such dryers in Europe to the Bayer chemical works in Germany.
Beko Technologies will also be showing its latest oil and water separators.
Owamat made by Beko sets the standard in condensate treatment.
Having been consistently upgraded and improved over more than two decades, the new generation has capability to deal with demanding applications including synthetic oils.
* Beko Technologies at Air-Tech 2008, NEC, Birmingham, UK, April 22-24, Stand A52. Request a free brochure from Beko Technologies ...
• Beko Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
