Product category:
Cranes, hoists, winches, chains and ancillaries
News Release from: Brevini | Subject: High torque planetary geared winch units
Edited by the Manufacturingtalk Editorial
Team on 03 December 2003
Compact geared winch units provide high
torque
Compact high torque planetary geared winch units have enabled a contractor to meet weight and power targets for a custom designed crane used to erect electricity pylons.
Brevini's range of compact high torque planetary geared winch units have enabled Balfour Beatty to meet weight and power targets for a custom designed crane used to erect electricity pylons on soft waterlogged ground Two Brevini units are used, one to lift the crane's boom and a second acting as the hoist winch
This article was originally published on Manufacturingtalk on 3 May 2007 at 8.00am (UK)
Related stories
Reliable drive system for waste water site
Brevini designed a reliable replacement drive system for Yorkshire Water's Rawcliffe sewage treatment works using efficiency motors, inverter drives and high-toque Brevini planetary reduction gears.
Silicone manufacturer's gearbox replaced
When the main drive gearbox on one of Primasil Silicones' main line mixing mills required replacement, Primasil turned to Brevini Power Transmissions UK to solve the problem quickly and decisively.
Both winches are required to operate reliably in high winds and extreme conditions as the crane is used to restore power after outages in bad weather.
The special application crane is designed to maintain HV power lines in Argentina that run for over 1,000 miles often over difficult terrain.
The design specification requires the crane to lift 500kV towers weighing over 8 tonnes, while standing in 2m of flooded Pampas ground.
Further reading
Planetery and bevel/helical technologies combined
Combining planetery and bevel/helical gearbox technologies has resulted in a flexible power transmission for machine tools, conveyors, metal-forming machines and process plant
Sand and gravel sorter's hydraulic power
A new type of self-propelled sand and gravel sorter for quarrying and grading is being powered by a combination of hydraulic control equipment, hydraulic motors and gear stages from Brevini UK.
Winch drives have highest torque:size ratios
High-efficiency planetary winch drives for drive applications from 3 to 12 tons, and in excess of 12 tons, are designed for easy integration into winch drums.
The unit itself is not self-propelled in order to reduce weight, also keeping the design simple and maximising its reliability in the field.
This philosophy is implemented throughout the design and is the reason for selecting Brevini's TNE Model of compact winch units.
The TNE design combines small hydraulic or electric motors with planetary gear stages to increase torque and reduce weight, making them an ideal choice for this application.
The drive arrangement also minimises the torque stress within the system by using smaller, faster drive elements and distributing any point pressure across many planet gears.
The result is a very reliable winch drive capable of withstanding high loads without the risk of failure associated with larger motors and gears handling more individual torque.
The arrangement is also highly efficient at over 98% per stage.
Rob Sonnex who is responsible for designing and building the Athey crane (named after the original tracked Athey logging trailer used to build the first version of this type of crane) had an existing drum to work with on the boom winch and asked Jon Snaith at Brevini UK to provide a solution.
"Line speed was important here as the time taken to hoist these pylons is just 30mins, compared to the full day it takes to erect European style four leg pylons.
We achieved 39m/min line speed with a continuous 5t load using a three stage planetary reduction, an adapter plate and a hydraulic piston motor of just 90cc.
We were also able to incorporate a fail to safe multi-disk brake at the input shaft.
Safety was a major consideration in this application.
The winch brakes are specified with a 10t capacity to compensate for wind loading, as the crane is used to restore power lines and pylons that have been blown down in storms and conditions can still be fairly inhospitable when they are being erected.
A two part hoist is used to lift an SWL of 10t.
The hoist winch is a TNE 6000 unit that incorporates the drum, drive and brake mounted onto an A-frame.
The advantage of this is that the design arrangement is fully tested and thanks to a modular build process can be specified to suit the parameters of the application exactly.
Fitting is also made remarkably easy as the entire unit can simply be bolted to the structure.
Once the cable is attached and hydraulic motor is piped in, it is ready to go.
Brevini UK is increasingly called upon to design and supply complete drive systems due to its ability to combine a range of geared and hydraulic elements to achieve and ideal solution, all from within the UK group company.
The product range includes planetary, bevel and worm gear solutions alongside hydraulic pumps, motors and controls.
Brevini in the UK carries out all design, commissioning and servicing.
• Brevini: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
