Product category:
Measurement and Quality Software and SPC
News Release from: Quality Gauging Systems | Subject: LaserGauge System
Edited by the Manufacturingtalk Editorial
Team on 30 August 2005
Laser measurement of turbine blade
pitting
Accurate measurement of pitting on turbine blades is now possible using the LaserGauge System available in the UK only from Luton-based QGS.
Accurate measurement of pitting on turbine blades is now possible using the LaserGauge System available in the UK only from Luton-based QGS Inspection for pitting on jet engine turbine blades poses a major headache for maintenance engineers
This article was originally published on Manufacturingtalk on 29 Jun 2007 at 8.00am (UK)
Related stories
Laser gauge cuts fuselage measurement time
The LaserGauge system from Quality Gauging Systems has cut the time taken to 'simulate' the radome interface on a Eurofighter fuselage, from 2.5 hours to just 15 minutes.
Air gauging system measures miniature holes
Air gauging system combines the benefits of pneumatics and electronics for the measurement of miniature holes using low pressure air.
Lightweight unit carries out torque audits
Ideal for torque audits, a rugged lightweight portable unit is designed to collect data from a wide variety of torque wrenches, torque transducers and rundown tools.
If the pitting is severe, the blade cannot be repaired and must be scrapped - the difficulty lies in separating those blades that can be repaired from those which cannot.
Naturally, in aerospace, safety is paramount, and, in the absence of an accurate way of measuring the pitting, this has led to the scrapping of large numbers of valuable turbine blades which could safely have been repaired.
Up to now pitting-depth has either been assessed using visual inspection and comparison with known examples or templates, a method prone to human error and lack of repeatability, or by optical comparator equipment - which is cumbersome and lacks portability.
Using a high resolution LaserGauge system both these drawbacks are eliminated.
Pitting can be measured to an thousandth of an inch, with the results of the inspection being automatically documented on a graph together with dimensional data.
Furthermore, because the LaserGauge system is both wireless and portable, several engines can be inspected at the same time over a wide area in the repair facility.
Operation of the LaserGauge equipment is very simple; the operator positions the laser stripe over the pit and releases the trigger.
The edges of the pit are found based on a selected tolerance, the greatest depth of the pit, any material that has been pushed up above the parent surface, and the width of the pit, are all calculated and displayed in the data table.
Using the LaserGauge to measure pitting can provide significant financial savings - when blades can be salvaged for repair rather than scrapped, as well as offering major time-savings, because inspections can be performed at the repair site, obviating the need to transport blades to a laboratory.
Furthermore, all the measurements undertaken are documented and repeatable and the results are traceable.
Similar benefits can also be obtained using the high resolution LaserGauge System in situations where corrosion or hairline cracks must be measured to determine the feasibility of repairing worn items, for example gears. Request a free brochure from Quality Gauging Systems ...
• Quality Gauging Systems: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
