Product category:
Lubrication - lubricants and lubrication systems
News Release from: Brammer UK | Subject: Foodlube Overhead Chain Fluid
Edited by the Manufacturingtalk Editorial
Team on 08 September 2000
Lubricant extends chain life on overhead
conveyors
Chain life on overhead conveyors can be extended, and product contamination minimised, with new Foodlube Overhead Chain Fluid, the latest addition to BSL's Rocol range
Chain life on overhead conveyors can be extended, and product contamination minimised, with new Foodlube Overhead Chain Fluid, from BSL The new lubricant is the latest addition to BSL's Rocol range, which is the most extensive range of foodgrade lubricants on the market
This article was originally published on Manufacturingtalk on 12 Jun 2001 at 8.00am (UK)
Related stories
Belts and sprocket systems cut transmission noise
BSL have introduced a revolutionary belt and sprocket system from Goodyear that can reduce transmission noise by up to 20dB(A) and cut energy consumption by up to 6%.
Sarnatech BNL range now at BSL
BSL has become an official UK distributor for Sarnatech BNL's standard range of plastic bearings, including radial bearings, skate wheels, conveyor end cap bearings, thrust races and pulleys.
It is the result of extensive research into the causes of chain failure and how they can be avoided.
Foodlube Overhead Chain Fluid is a safe, cost- effective, high-performance replacement for non-foodgrade industrial chain lubricants.
As with other products in the Foodlube range, the product is specially formulated for food and other clean environments, being manufactured from non-toxic, mineral hydrocarbon-free, FDA-listed foodgrade ingredients.
Foodlube Overhead Chain Fluid meets the requirements of the former USDA HI regulations - which were the highest quality measurement standards applicable to foodgrade products.
It contains no animal-derived materials, nuts or genetically-modified ingredients, helping manufacturers to respond to retailer and consumer demands for food free from these elements.
The tenacity of Foodlube Overhead Chain Fluid makes it particularly suitable for use on overhead chains and conveyors, where there is a need to minimise the risk of lubricants dripping onto foodstuffs below, causing contamination and waste.
Operational between -200C and +1500C and with high resistance to water wash-off, Foodlube Overhead Chain Fluid is suitable for use across a broad range of clean environments - even wet environments where wash-down procedures would ordinarily require frequent reapplication of the lubricant.
In harsh and demanding operating environments the anti-corrosive and protective qualities of Foodlube Overhead Chain Fluid minimise wear on chains, enabling manufacturers to make cost-savings by extending the periods between chain replacement.
• Brammer UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
