Product category:
Pumps and valves
News Release from: Castell Iso-Lok | Subject: Ball valve lockouts
Edited by the Manufacturingtalk Editorial
Team on 18 September 2006
Ball valve lockouts ensure personnel
safety
Latest addition to a range of ball valve lockouts, for use with ball valves of up to 1in in diameter, ensures maintenance shut downs can be implemented to highest personnel safety.
The latest addition to Castell Iso-lok's range of ball valve lockouts has been designed for use with ball valves of up to 1in in diameter, ensuring maintenance shut downs can be implemented to the highest possible standard of personnel safety Iso-lok's new ball valve lockout allows valves to be locked in either an open or closed position
This article was originally published on Manufacturingtalk on 19 Feb 2003 at 8.00am (UK)
Related stories
SS valve cover hinders vandalism, improves safety
A safety specialist has introduced a stainless steel version of a successful V-Safe valve cover, offering greater safety and security.
It can be easily fitted by pulling the two halves apart, lowering it on to a valve and pushing the two halves back together again to encapsulate the valve lever and the main body of the valve.
A removable lever packing piece is included for use with narrower valve levers.
Made from durable moulded plastic and available in four colours, the lockout is also fully dielectric, highly resistant to solvent and other chemical products, and highly resistant to cracking and abrasion.
It is also resistant to extreme temperature changes, from a minimum of -50 deg F to a maximum of +360 deg F.
Once fitted, the lockout can be held in place with an Iso-lok padlock.
• Castell Iso-Lok: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
