Product category:
Analysis, simulation and mathematical software
News Release from: CD-adapco | Subject: STAR-CD
Edited by the Manufacturingtalk Editorial
Team on 06 June 2005
CD-adapco to present enterprise-wide
Solution
CD-adapco to present "enterprise-wide Solution" on the 50th anniversary of the ASME Turbo Expo.
CD-adapco, the leading provider of CAD-embedded flow simulation solutions will exhibit at the annual ASME Turbo Expo at the Reno Hilton in Reno, Nevada, June 6-9, 2005 CD-adapco would like to congratulate ASME Turbo Expo on its 50th anniversary since it began as the ASME Gas Turbine Conference and Products Show in 1955
This article was originally published on Manufacturingtalk on 24 Jan 2006 at 8.00am (UK)
Related stories
CAD-embedded simulation for STAR-CD and STAR-CCM+
CD-adapco announces the release of the STAR-CAD Gateways V4.02
Star range Still the choice of champions
CD-adapco have been suppliers of advanced CAE software to the Renault F1 Team since its inception in 2001
CD-adapco also reaches an important anniversary in 2005, as it marks 25 years in the CAE Industry.
Both of these milestones will be celebrated at Booth 101 on Wednesday, June 8 during the cocktail reception between 4:00 pm and 5:30 pm.
The Turbomachinery industry's needs are perhaps the most demanding and varied of all when Computational Fluid Dynamics (CFD) solutions are required.
The necessity of modeling complex geometries within demanding tolerances, coupled with extreme variations in operating conditions poses a formidable challenge.
Simultaneously, design cycle times are being shortened, placing a greater dependence upon the efficiency and accuracy of CFD simulations.
STAR-CD, STAR-CCM+ and the STAR-CAD Series equip the designer with the tools needed to overcome these challenges.
With these tools, CFD has been successfully applied to virtually every component of contemporary turbomachinery.
Representatives can be met at Turbo Expo at Booth 101 to discuss how STAR-CD, STAR-CCM+ and the STAR-CAD Series can help to overcome challenges.
A series of daily presentations will also be run throughout the show, from the Heritage stage on the Exhibition floor.
Tuesday, June 7, 4:00 pm - 4:45 pm.
Structural optimization and characterizing Friction.
Wednesday, June 8, 12:30 pm - 1:15 pm.
Improving performance and operability through numerical simulation and automated optimization Thursday, June 9, 11:30 am - 12:15 pm.
Recent advances in numerical modeling that improve productivity and model simulation accuracy.
• CD-adapco: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
